ISO 7891:1984
(Main)Earth-moving machinery — Dozer end bits — Hole specification
Earth-moving machinery — Dozer end bits — Hole specification
Engins de terrassement — Bords extrêmes de lame — Spécifications des trous
General Information
Buy Standard
Standards Content (Sample)
International Standard 7891
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOME~YHAPOAHAR OPrAHM3AUHR no CTAHAAPTH3AUHM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
i
j 0 Earth-moving machinery - Dozer end bits - Hole
I specification
~ 1
Engins de terrassement - Bords extrêmes de lame - Spécifications des trous
First edition - 1984-04-15
UDC 621.879.33: 621.882.15 Ref. No. IS0 7891-1984 (E)
G
Descriptors : earth handling equipment, blades, holes, positioning, specifications, interchangeability.
L
Price based on 7 pages
E
---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7891 was developed by Technical Committee ISO/TC 127,
Earth-moving machinery, and was circulated to the member bodies in March 1983.
It has been approved by the member bodies of the following countries :
Australia Czechoslovakia Sweden
Austria Germany, F. R. United Kingdom
Belgium Italy USA
Bulgaria Japan USSR
Canada Romania
The member bodies of the following countries expressed disapproval of the document
on technical grounds :
Brazil
Poland
O international Organization for Standardization, 1984 0
Printed in Switzerland
---------------------- Page: 2 ----------------------
IS0 7891-1984 (E)
INTERNATIONAL STANDARD
Earth-moving machinery - Dozer end bits - Hole
specification
1 Scope and field of application 2 References
This International Standard specifies the minimum require-
[SO 6747, Earth-moving machinew - Tractors - Termino/-
ments for the mounting bolt hole location and the shapes and
ogy.
dimensions of holes for mounting bolts in dozer end bits of
earth-moving machinery, taking into consideration the inter-
IÇO 7129, Earth-moving machinew - Tractors with dozer,
changeability.
graders, tractor scrapers - Cutting edges - Principal shapes
and basic dimensions.
This International Standard applies to straight blades, angle
blades, U-blades, and semi-U-blades.
3 Definition
end bit : Bit at both sides of the cutting edge of dozer blade
(see figure 1).
End bit
Straight blade Angle blade
U-blade
Semi-U-blade
Figure 1 - End bits
1
---------------------- Page: 3 ----------------------
IS0 7891-1984 (E)
4 Hole location in end bits 4.3 Remarks concerning figures 2, 3 and 4 :
a) each illustration shows a right-hand end bit, but does
not specify the shape of the end bit;
4.1 The hole location in dozer end bits shall be as shown in
figures 2, 3 and 4. b) different shapes of end bit may be used to fit the types
of blade (straight blade, semi-U-blade, etc. i;
c) this International Standard gives
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOMEXAYHAPO~HAR OPTAHHJAUMR Il0 CTAHAAPTM3AUMM*ORGANlSATlON INTERNATIONALE DE NORMALISATION
Engins de terrassement - Bords extrêmes de lame -
Spécifications des trous
Earth-moving machinery - Dozer end bits - Hole specification
Première édition - 1984-04-15
CDU 621.879.33 : 621.882.15 Réf. no : IS0 7891-1984 (FI
Descripteurs : matériel de terrassement, lame, trou, mise en position, spécification, interchangeabilité.
Prix basé sur 7 pages
---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux cornités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO.
La Norme internationale IS0 7891 a été élaborée par le comité technique ISO/TC 127,
Engins de terrassement, et a été soumise aux comités membres en mars 1983.
Les comités membres des pays suivants l'ont approuvée :
Allemagne, R. F. Canada Suède
Australie Italie Tchécoslovaquie
Autriche Japon URSS
Be I g i q u e Roumanie USA
Bulgarie Royaume-U ni
Les comités membres des pays suivants l'ont désapprouvée pour des raisons
techniques :
Brésil
Pologne
O Organisation internationale de normalisation, 1984 0
Imprimé en Suisse
---------------------- Page: 2 ----------------------
IS0 7891-1984 (F)
NORM E I N TE R NAT1 O NALE
Engins de terrassement - Bords extrêmes de lame -
Spécifications des trous
2 Références
1 Objet et domaine d‘application
IS0 6747, Engins de terrassement - Tracteurs - Termino-
La présente Norme internationale spécifie les exigences mini-
males en ce qui concerne le positionnement des trous des bou- logie.
lons de montage, les formes et les dimensions des trous pour le
montage des boulons sur les bords extrêmes de lame des IS0 7129, Engins de terrassement - Tracteurs à lames, nive-
leuses, décapeuses - Bords coupants - Formes principales et
engins de terrassement, en prenant en compte le problème de
l’interchangeabilité. dimensions de base.
3 Définition
La présente Norme internationale s’applique aulx lames droites,
bord extrême : Bord des deux côtés de la partie coupante
aux lames formant un angle (lames biaises), aux lames en U et
aux lames en demi-U. d‘une lame (voir figure 1).
*
Bord extrême
i
Lame droite Lame biaise
Lame en U Lame en demi-U
Figure 1 - Bords extrêmes de lame
1
---------------------- Page: 3 ----------------------
IS0 7891-1984 (F)
4 Positionnement des trous sur les bords 4.3 Remarques relatives aux figures 2, 3 et 4 :
extrêmes
Chaque illustration montre un bord extrême droit, mais
a)
ne précise pas la forme du bord extrême.
4.1 Le positionnement des trous sur les bords extrêmes d’une
b) Différentes formes de bord d‘extrémité peuvent être uti-
lame doit être tel qu‘indiqué aux figures 2, 3 et 4.
lisées pour s’adapter sur différents types de lames (lame
droite, lame en demi-U, etc.).
c) La présente Norme internationale contient à la fois des
4.2 Chaque fraisure de trou doit être située à l’intérieur d’un dimensions entières et partielles, du fai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.