ISO/IEC DTS 18013-7
(Main)Personal identification — ISO-compliant driving licence — Part 7: Mobile driving licence (mDL) add-on functions
Personal identification — ISO-compliant driving licence — Part 7: Mobile driving licence (mDL) add-on functions
Identification des personnes — Permis de conduire conforme à l'ISO — Partie 7: Fonctionnalités supplémentaires pour permis de conduire sur téléphone mobile
General Information
Buy Standard
Standards Content (Sample)
FINAL DRAFT
Technical
Specification
ISO/IEC DTS
18013-7
ISO/IEC JTC 1/SC 17
Personal identification — ISO-
Secretariat: BSI
compliant driving licence —
Voting begins on:
2024-06-04
Part 7:
Mobile driving licence (mDL) add-
Voting terminates on:
2024-07-30
on functions
Identification des personnes — Permis de conduire conforme à
l'ISO —
Partie 7: Fonctionnalités supplémentaires pour permis de
conduire sur téléphone mobile
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC DTS 18013-7:2024(en) © ISO/IEC 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/IEC DTS 18013-7:2024(en)
Technical
Specification
ISO/IEC DTS
18013-7
ISO/IEC JTC 1/SC 17
Personal identification — ISO-
Secretariat: BSI
compliant driving licence —
Voting begins on:
Part 7:
2024-06-04
Mobile driving licence (mDL) add-
on functions
Voting terminates on:
2024-07-30
Identification des personnes — Permis de conduire conforme
à l'ISO —
Partie 7: Fonctionnalités supplémentaires pour permis de
conduire sur téléphone mobile
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO/IEC 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/IEC DTS 18013-7:2024(en) © ISO/IEC 2024
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC DTS 18013-7:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 1
5 Conformance requirement . 2
6 mDL overview . 2
6.1 Standards context .2
6.2 Interfaces .
...
ISO/IEC DTS 18013-7:2024(en)
ISO JTC 1/SC 17/WG 10
Secretariat: BSI
Date: 2024-02-13 05
Personal identification — ISO-compliant driving licence — Part 7: Mobile driving licence (mDL)
add-on functions
DTS ballot
Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
© ISO #### – All rights reserved
---------------------- Page: 1 ----------------------
© ISO 2024
Identification des personnes — Permis de conduire conforme à l'ISO — Partie 7: Fonctionnalités
supplémentaires pour permis de conduire sur téléphone mobile
---------------------- Page: 2 ----------------------
ISO/IEC 18013-7:2024
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part
of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’s member body
in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
4 © ISO/IEC 2024 – All rights reserved
---------------------- Page: 3 ----------------------
ISO/IEC DTS 18013-7:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawnISO and IEC draw attention to the possibility that some of the elementsimplementation
of this document may beinvolve the subjectuse of (a) patent rights. ISO(s). ISO and IEC take no position
concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the
date of publication of this document, ISO and IEC had not received notice of (a) patent(s) which may be
required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at www.iso.org/patents
and https://patents.iec.ch. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO 18013 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
ommittees.
© ISO/IEC 2024 – All rights reserved
5
---------------------- Page: 4 ----------------------
ISO/IEC 18013-7:2024
Introduction
ISO/IEC 18013-5 describes interface and related requirements to facilitate ISO-compliant driving licence
functionality on a mobile device, standardizing the mobile driving licence (mDL) functionality.
This document augments the capabilities of t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.