Ships and marine technology — Ship's mooring and towing fittings — Mooring chocks

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for mooring chocks installed to lead the mooring and towing rope of a ship.

Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards

General Information

Status
Published
Publication Date
27-Aug-2020
Current Stage
6060 - International Standard published
Start Date
28-Aug-2020
Completion Date
28-Aug-2020
Ref Project

RELATIONS

Buy Standard

Standard
ISO 13713:2020 - Ships and marine technology -- Ship's mooring and towing fittings -- Mooring chocks
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 13713 - Ships and marine technology -- Ship's mooring and towing fittings -- Mooring chocks
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 13713
Second edition
2020-08
Ships and marine technology —
Ship's mooring and towing fittings —
Mooring chocks
Navires et technologie maritime — Corps-morts et ferrures de
remorquage de navires — Chaumards
Reference number
ISO 13713:2020(E)
ISO 2020
---------------------- Page: 1 ----------------------
ISO 13713:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 13713:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification ............................................................................................................................................................................................................ 1

4.1 Type .................................................................................................................................................................................................................. 1

4.2 Nominal sizes ........................................................................................................................................................................................... 1

5 Dimensions ................................................................................................................................................................................................................. 2

6 Materials ....................................................................................................................................................................................................................... 2

7 Construction .............................................................................................................................................................................................................. 2

8 Manufacturing and inspection ............................................................................................................................................................... 2

9 Marking .......................................................................................................................................................................................................................... 2

Annex A (normative) Basis for strength assessment of mooring chocks ....................................................................... 7

Bibliography .............................................................................................................................................................................................................................11

© ISO 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 13713:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www .iso .org/ iso/ foreword .html.

This document was prepared Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee

SC 4, Outfitting and deck machinery.

This second edition cancels and replaces the first edition (ISO 13713:2012), which has been technically

revised.
The main changes compared to the previous edition are as follows:
— technical guidelines have been added in 7.2;
— the definition of SWL (3.1) has been reworded;
— the leader line in Figure 1 has been amended;
— technical information on FEM has been added in A.3.2.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 13713:2020(E)
Introduction

The mooring chock is a type of ship’s mooring and towing fitting installed on the shipside to lead the

mooring and towing rope from the ship’s inboard to outboard.

The mooring chocks are normally adopted for ships which use nylon or other synthetic ropes other

than wire ropes considering the small bending ratio (for wire ropes, see ISO 13729).

© ISO 2020 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 13713:2020(E)
Ships and marine technology — Ship's mooring and towing
fittings — Mooring chocks
1 Scope

This document specifies the types, nominal sizes, dimensions and materials, as well as construction,

manufacturing and marking requirements, for mooring chocks installed to lead the mooring and

towing rope of a ship.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

IMO Circular MSC/Circ.1175, Guidance on shipboard towing and mooring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
safe working load
SWL

safe load limit (maximum permissible load) of the fittings used for mooring and towing

4 Classification
4.1 Type

The mooring chocks shall be classified by its installation site as belonging to one of the following types:

a) Type A: deck-mounted mooring chock;
b) Type B: bulwark-mounted mooring chock.
4.2 Nominal sizes

The nominal sizes, L × H, of mooring chocks are denoted by reference to the width and height of the

opening of the chock, in millimetres. For the mooring chocks having the same size, the letter of the

alphabet, i.e. A or B, is followed by the nominal size for the different safe working loads (SWL).

...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13713
ISO/TC 8/SC 4
Ships and marine technology —
Secretariat: SAC
Ship's mooring and towing fittings —
Voting begins on:
2020­05­25 Mooring chocks
Voting terminates on:
Navires et technologie maritime — Corps-morts et ferrures de
2020­07­20
remorquage de navires — Chaumards
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 13713:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 1 ----------------------
ISO/FDIS 13713:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH­1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 13713:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification ............................................................................................................................................................................................................ 1

4.1 Type .................................................................................................................................................................................................................. 1

4.2 Nominal sizes ........................................................................................................................................................................................... 1

5 Dimensions ................................................................................................................................................................................................................. 2

6 Materials ....................................................................................................................................................................................................................... 2

7 Construction .............................................................................................................................................................................................................. 2

8 Manufacturing and inspection ............................................................................................................................................................... 2

9 Marking .......................................................................................................................................................................................................................... 2

Annex A (normative) Basis for strength assessment of mooring chocks ....................................................................... 7

Bibliography .............................................................................................................................................................................................................................11

© ISO 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/FDIS 13713:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non­governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www .iso .org/ iso/ foreword .html.

This document was prepared Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee

SC 4, Outfitting and deck machinery.

This second edition cancels and replaces the first edition (ISO 13713:2012), which has been technically

revised.
The main changes compared to the previous edition are as follows:
— technical guidelines have been added in 7.2;
— the definition of SWL (3.1) has been reworded;
— the leader line in Figure 1 has been amended;
— technical information on FEM has been added in A.3.1.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/FDIS 13713:2020(E)
Introduction

The mooring chock is a type of ship’s mooring and towing fitting installed on the shipside to lead the

mooring and towing rope from the ship’s inboard to outboard.

The mooring chocks are normally adopted for ships which use nylon or other synthetic ropes other

than wire ropes considering the small bending ratio (for wire ropes, see ISO 13729).

© ISO 2020 – All rights reserved v
---------------------- Page: 5 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 13713:2020(E)
Ships and marine technology — Ship's mooring and towing
fittings — Mooring chocks
1 Scope

This document specifies the types, nominal sizes, dimensions and materials, as well as construction,

manufacturing and marking requirements, for mooring chocks installed to lead the mooring and

towing rope of a ship.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

IMO Circular MSC/Circ.1175, Guidance on shipboard towing and mooring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
safe working load
SWL

safe load limit (maximum permissible load) of the fittings used for mooring and towing

4 Classification
4.1 Type

The mooring chocks shall be classified by its installation site as belonging to one of the following types:

a) Type A: deck-mounted mooring chock;
b) Type B: bulwark-mounted mooring chock.
4.2 Nominal sizes
The nominal
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.