Cup head square neck bolts with small head and short neck — Product grade B

Specifies the characteristics of products with metric dimensions and thread sizes from M 6 up to and including M 20; tabulates thread sizes M 6 up to M 20 with nominal lengths from 12 mm up to 160 mm and specifications with reference to International Standards; gives an example for the designation.

Vis à métaux à tête bombée à collet carré à tête réduite et collet court — Grade B

Vijaki z nizko polokroglo glavo in štirirobim podglavkom - Razred izdelave B

General Information

Status
Published
Publication Date
15-Jun-1988
Current Stage
9093 - International Standard confirmed
Completion Date
31-Jul-2020

Buy Standard

Standard
ISO 8678:1988 - Cup head square neck bolts with small head and short neck -- Product grade B
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8678:1996
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 8678:1988 - Vis a métaux a tete bombée a collet carré a tete réduite et collet court -- Grade B
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8678:1988 - Vis a métaux a tete bombée a collet carré a tete réduite et collet court -- Grade B
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD
8678
First edition
1988-06- 15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXflYHAPOflHAR OPTAHM3A~Mfl l-l0 CTAH~APTM3AL&lM
Cup head Square neck bolts with small head and short
neck - Product grade B
Vis 3 mktaux & t6te bombee h colet carrh 6 t&e rdduite et collet tourt - Grade B
Reference number
ISO 8678 : 1988 (E)

---------------------- Page: 1 ----------------------
ISO 8678 : 1988 (EI
Foreword
ISO (the Internation.aI Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 8678 was prepared by Technical Committee ISO/TC 2,
Fas teners.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1988
Printed in Switzerland

---------------------- Page: 2 ----------------------
_~~~ ~~
ISO 8678 : 1988 (E)
INTERNATIONAL STANDARD
head Square neck bolts with small head and short
- Product grade B
neck
1 Scope and field of application
This International Standard specifies the characteristics of cup head Square neck bolts with small head, short neck, metric dimensions
and threads from M6 up to and including M20, of product grade B.
lf, in spe&1 cases, specifications other than those listed in this International Standard are required, it is recommended that they
should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 4759-1.
2 References
Symbols and designa tions of dimensions.
ISO 225, Fasteners - Bolts, screws, studs and nuts -
ISO 261, ISO general purpose metric screw threads - General plan.
ISO 888, Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts.
ISO 898-1, Mechanical properties of fasteners - Part 7: Bolts, screws and studs.
Part 2: Limits for general purpose bolt and nut threads -
ISO 965-2, ISO general purpose metric screw threads - Tolerantes -
Medium quality .
ISO 1461, Metallic coatings - Hot dip galvanized coatings on fabricated ferrous products - Requirements.
ISO 3269, Fasteners - Accep tance inspection .
ISO 4642, Threaded components - Electroplated coatings?
Part 1: Bolts, screws and nuts with thread diameters > 1,6 and Q 150 mtn snd product
ISO 4759-1, Tolerantes for fasteners -
grades A, B and C.
ISO 6157-1, Fasteners - Surface discon tinuities - Part 1: Bolts, screws and studs for general requirements.
ISO 6157-3, Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements.
General requirements for bolts, screws, studs and nuts.
ISO 8992, Fasteners -
1) At present at the Stage of draft.

---------------------- Page: 3 ----------------------
ISO 8678: 1988 (El
3 Dimensions
NOTE - Symbols and desigvations of dimensions are specified in ISO 2
...

SLOVENSKI STANDARD
SIST ISO 8678:1996
01-april-1996
Vijaki z nizko polokroglo glavo in štirirobim podglavkom - Razred izdelave B
Cup head square neck bolts with small head and short neck -- Product grade B
Vis à métaux à tête bombée à collet carré à tête réduite et collet court -- Grade B
Ta slovenski standard je istoveten z: ISO 8678:1988
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST ISO 8678:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 8678:1996

---------------------- Page: 2 ----------------------

SIST ISO 8678:1996
INTERNATIONAL STANDARD
8678
First edition
1988-06- 15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXflYHAPOflHAR OPTAHM3A~Mfl l-l0 CTAH~APTM3AL&lM
Cup head Square neck bolts with small head and short
neck - Product grade B
Vis 3 mktaux & t6te bombee h colet carrh 6 t&e rdduite et collet tourt - Grade B
Reference number
ISO 8678 : 1988 (E)

---------------------- Page: 3 ----------------------

SIST ISO 8678:1996
ISO 8678 : 1988 (EI
Foreword
ISO (the Internation.aI Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 8678 was prepared by Technical Committee ISO/TC 2,
Fas teners.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1988
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 8678:1996
_~~~ ~~
ISO 8678 : 1988 (E)
INTERNATIONAL STANDARD
head Square neck bolts with small head and short
- Product grade B
neck
1 Scope and field of application
This International Standard specifies the characteristics of cup head Square neck bolts with small head, short neck, metric dimensions
and threads from M6 up to and including M20, of product grade B.
lf, in spe&1 cases, specifications other than those listed in this International Standard are required, it is recommended that they
should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 4759-1.
2 References
Symbols and designa tions of dimensions.
ISO 225, Fasteners - Bolts, screws, studs and nuts -
ISO 261, ISO general purpose metric screw threads - General plan.
ISO 888, Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts.
ISO 898-1, Mechanical properties of fasteners - Part 7: Bolts, screws and studs.
Part 2: Limits for general purpose bolt and nut threads -
ISO 965-2, ISO general purpose metric screw threads - Tolerantes -
Medium quality .
ISO 1461, Metallic coatings - Hot dip galvanized coatings on fabricated ferrous products - Requirements.
ISO 3269, Fasteners - Accep tance inspection .
ISO 4642, Threaded components - Electroplated coatings?
Part 1: Bolts, screws and nuts with thread diameters > 1,6 and Q 150 mtn snd product
ISO 4759-1, Tolerantes for fasteners -
grades A, B and C.
ISO 6157-1, Fa
...

ISO
NORME INTERNATIONALE 8678
Première édition
1988-06-U
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXAYHAPOAHAFI OPl-AHM3A~Mfl fl0 CTAH)JAPTM3A~MM
Vis à métaux à tête bombée à collet carré à tête réduite
et collet court - Grade B
Cup head square neck bolts with small head and short ne& - Product grade B
Numéro de référence
ISO 8678 : 1988 (F)

---------------------- Page: 1 ----------------------
ISO 8678 : 1988 0
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est en général confiée aux comités techniques de I’ISO.
Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux travaux. L’ISO col-
labore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui
concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 8678 a été élaborée par le comité technique ISO/TC 2,
&men ts de fixation.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
l
0 Organisation internationale de normalisation, 1988
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE
ISO 8678: 1988 (F)
Vis à métaux à tête bombée à collet carré à tête réduite
et collet court - Grade B
1 Objet et domaine d’application
La présente Norme internationale spécifie les caractéristiques des vis à tête bombée à collet carré à tête réduite et collet court, de
dimensions métriques, de filetage M6 à M20 inclus et de grade B.
Si d’autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple
ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 4759-l.
2 Références
I SO 225, Éléments de fixa tien - Boulons, vis, goujons et écrous - Symboles et désigna tiens des dimensions.
ISO 261, Filetages métriques /SO pour usages généraux - Vue d’ensemble.
L ongueurs de tige nominales, et longueurs file tées des boulons d’applica tien générale.
I SO 888, Boulons, vis et goujons -
I SO 898- 1, Caractéristiques mécaniques des éléments de fixation - Partie 7 : Boulons, vis et goujons.
ISO 965-2, Filetages métriques ISO pour usages généraux - Tolérances - Partie 2: Dimensions limites pour la boulonnerie d’usage
courant - Qualité moyenne.
ISO 1461, Revêtements métalliques - Revêtements de galvanisation à chaud sur produits finis en fer - Spécifications.
ISO 3269, Éléments de fixation - Contrôle de réception.
ISO 4642, Él&ments filetés - Revêtements électrolytiques. 1 )
I S 0 4759- 1, Tolérances pour éléments de fixa tien - Partie 7: Boulons, vis et écrous de diamètre de filetage > 1,6 et < 150 mm et de
niveaux de finition A, B et C.
I SO 6157- 1, Élhments de fixa tien - Défauts de surface - Partie 7: Boulons, vis et goujons d’usage général.
ISO 67 57-3, Éléments de fixation - Défauts de surface - Partie 3: Boulons, vis et goujons pour applica tiens particulières.
I S 0 8992, Éléments de fixation - Prescriptions générales relatives aux boulons, vis, goujons et écrous.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
SO 8678: 1988 (F)
3 Dimensions
Les symboles et désignations des dimensions sont spécifiés dans I’ISO 225.
NOTE -
0
15
0
10
...

ISO
NORME INTERNATIONALE 8678
Première édition
1988-06-U
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXAYHAPOAHAFI OPl-AHM3A~Mfl fl0 CTAH)JAPTM3A~MM
Vis à métaux à tête bombée à collet carré à tête réduite
et collet court - Grade B
Cup head square neck bolts with small head and short ne& - Product grade B
Numéro de référence
ISO 8678 : 1988 (F)

---------------------- Page: 1 ----------------------
ISO 8678 : 1988 0
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est en général confiée aux comités techniques de I’ISO.
Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux travaux. L’ISO col-
labore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui
concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 8678 a été élaborée par le comité technique ISO/TC 2,
&men ts de fixation.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
l
0 Organisation internationale de normalisation, 1988
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE
ISO 8678: 1988 (F)
Vis à métaux à tête bombée à collet carré à tête réduite
et collet court - Grade B
1 Objet et domaine d’application
La présente Norme internationale spécifie les caractéristiques des vis à tête bombée à collet carré à tête réduite et collet court, de
dimensions métriques, de filetage M6 à M20 inclus et de grade B.
Si d’autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple
ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 4759-l.
2 Références
I SO 225, Éléments de fixa tien - Boulons, vis, goujons et écrous - Symboles et désigna tiens des dimensions.
ISO 261, Filetages métriques /SO pour usages généraux - Vue d’ensemble.
L ongueurs de tige nominales, et longueurs file tées des boulons d’applica tien générale.
I SO 888, Boulons, vis et goujons -
I SO 898- 1, Caractéristiques mécaniques des éléments de fixation - Partie 7 : Boulons, vis et goujons.
ISO 965-2, Filetages métriques ISO pour usages généraux - Tolérances - Partie 2: Dimensions limites pour la boulonnerie d’usage
courant - Qualité moyenne.
ISO 1461, Revêtements métalliques - Revêtements de galvanisation à chaud sur produits finis en fer - Spécifications.
ISO 3269, Éléments de fixation - Contrôle de réception.
ISO 4642, Él&ments filetés - Revêtements électrolytiques. 1 )
I S 0 4759- 1, Tolérances pour éléments de fixa tien - Partie 7: Boulons, vis et écrous de diamètre de filetage > 1,6 et < 150 mm et de
niveaux de finition A, B et C.
I SO 6157- 1, Élhments de fixa tien - Défauts de surface - Partie 7: Boulons, vis et goujons d’usage général.
ISO 67 57-3, Éléments de fixation - Défauts de surface - Partie 3: Boulons, vis et goujons pour applica tiens particulières.
I S 0 8992, Éléments de fixation - Prescriptions générales relatives aux boulons, vis, goujons et écrous.
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
SO 8678: 1988 (F)
3 Dimensions
Les symboles et désignations des dimensions sont spécifiés dans I’ISO 225.
NOTE -
0
15
0
10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.