ISO/IEC 15963-2:2020

Information technology — Radio frequency identification for item management — Part 2: Unique identification for RF tags registration procedures

This document specifies the procedural requirements to maintain identities and outlines the obligations of the Registration Authority.

Technologies de l'information — Identification par radiofréquence pour la gestion des objets — Partie 2: Identification unique des tags RF

General Information

• Status: Published
• Publication Date: 18-Mar-2020
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
• Drafting Committee: ISO/IEC JTC 1/SC 31/WG 4 - Radio communications
• Current Stage: 6060 - International Standard published
• Start Date: 19-Mar-2020
• Due Date: 28-Sep-2021
• Completion Date: 19-Mar-2020

Relations

• Revises: ISO/IEC 15963:2009 - Information technology — Radio frequency identification for item management — Unique identification for RF tags
• Effective Date: 04-Feb-2017

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 15963-2
First edition
2020-03
Information technology — Radio
frequency identification for item
management —
Part 2:
Unique identification for RF tags
registration procedures
Technologies de l'information — Identification par radiofréquence
pour la gestion des objets —
Partie 2: Identification unique des tags RF
Reference number
ISO/IEC 15963-2:2020(E)
©
ISO/IEC 2020

---------------------- Page: 1 ----------------------
ISO/IEC 15963-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 15963-2:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Issuer code . 1
5 Registration authority . 2
5.1 Contact details . 2
5.2 Responsibilities . 2
5.3 Register of issuer codes . 2
5.4 Issuer code allocation . 2
Bibliography . 3
© ISO/IEC 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 15963-2:2020(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that
are members of ISO or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal with particular fields of
technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC
list of patent declarations received (see http:// patents .iec .ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 31 Automatic identification and data capture techniques.
This first edition of ISO/IEC 15963-2 together with of ISO/IEC 15963-1, cancels and replaces
ISO/IEC 15963:2009, which has been technically revised.
The main changes compared to the previous edition are as follows:
— Update to include the addition of part 2 — registration details, and to add new registration
information.
A list of all parts in the ISO/IEC 15963 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO/IEC 2020 – All rights reserved

---------
...