Transport packaging — Small load container systems — Part 2: Column Stackable System (CSS)

ISO/TS 19709-2:2015 specifies the main characteristics and the testing of durable, reusable, parallelepipedic containers and their accessories which form a column stackable system (CSS) designed to contain bulk or precisely located component loads up to maximum load of 20 kg used for automotive industry applications.

Emballage — Systèmes de transport de petites charges — Partie 2: Systèmes gerbable en colonnes (SGP)

General Information

Status
Published
Publication Date
18-Jan-2016
Technical Committee
Drafting Committee
Current Stage
9093 - International Standard confirmed
Completion Date
13-Aug-2023
Ref Project

Buy Standard

Technical specification
ISO/TS 19709-2:2016 - Transport packaging -- Small load container systems
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
ISO/TS 19709-2:2016 - Transport packaging -- Small load container systems
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 19709-2
First edition
2016-02-01
Transport packaging — Small load
container systems —
Part 2:
Column Stackable System (CSS)
Emballage — Systèmes de transport de petites charges —
Partie 2: Systèmes gerbable en colonnes (SGP)
Reference number
ISO/TS 19709-2:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO/TS 19709-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 19709-2:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Characteristics . 2
5 Dimensions, masses and applied loads . 2
5.1 CSS SLC . 2
5.1.1 Main dimensions and tolerances . 2
5.1.2 Detailed dimensions for CSS SLCs . 3
5.2 Accessories . 6
6 Essential functional features .11
6.1 CSS SLC .11
6.2 Carrying handles .12
6.3 Vertical ribs for lifting grippers .13
6.4 Centering holes .14
6.5 CSS-SLC base .14
7 Material .14
8 Marking and labelling .14
Annex A (informative) Column stacking of palletized loads .15
Annex B (informative) Colours .17
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TS 19709-2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 122, Packaging.
ISO 19709 consists of the following parts, under the general title Transport packaging — Small load
container systems:
— Part 1: Common requirements and test methods
— Part 2: Column Stackable System (CSS) [Technical Specification]
— Part 3: Bond Stackable System (BSS) [Technical Specification]
iv © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TS 19709-2:2016(E)

Introduction
The small load container (SLC) system specified in this part of ISO 19709 was first conceived for
handling, storage and transport of goods and designed to meet the needs of automotives manufacturers
and their suppliers.
The multi-functional design of its elements allow a SLC system manufactured in accordance with
ISO 19709 to meet the requirements of different manual, mechanical and automatic handling, transport
and storage systems in the automotive industry transportation chain. It is likely that this system of
SLCs and accessories will frequently be used in a pool.
The special characteristic of the system specified in ISO 19709 is the self-securing mechanism of the
unit load in the column stack. For this reason, this system is called column stackable system.
The CS system consists of the following elements:
— CSS-SLC;
— Lid [the prefix “D” reflects the German term for “lid” (Deckel)];
— Pallet cover [the prefix “A” reflects the German term for “cover” (Abdeckung)].
The use of CSS-SLC systems with palletized loads is discussed in Annex A.
© ISO 2016 – All rights reserved v

---------------------- Page: 5 ----------------------
TECHNICAL SPECIFICATION ISO/TS 19709-2:2016(E)
Transport packaging — Small load container systems —
Part 2:
Column Stackable System (CSS)
1 Scope
This part of ISO 19709 specifies the main characteristics and the testing of durable, reusable,
parallelepipedic containers and their accessories which form a column stackable system (CSS) designed
to contain bulk or precisely located component loads up to maximum load of 20 kg used for automotive
industry applications.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
1)
ISO 19709-1:— , Transport packaging — Small load container systems — Part 1: Common requirements
and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 19709-1 and the following apply.
3.1
CSS small load container
small load container (SLC) with special functional features which ensure a mutual compatibility
3.2
pallet cover
system element with a safeguarding and protective function that closes the top of the loading unit with
a level surface that distributes the mass of overlying loads in a stack
3.3
SLC capacity
usable inner volume which is calculated by multiplying the usable inner length by the usable inner
width (both measured at half height) and the usable inner height
3.4
SLC lid (D 65, D 45, D 35)
BSS-SLC and CSS-SLC system elements with virtually neutral height for protection of the cargo
Note 1 to entry: The prefix “D” reflects the German term for “lid” (Deckel).
Note 2 to entry: The number 65 means lid for the 600 mm × 400 mm size containers. The number 45 means lid
for the 400 mm × 300 mm size containers. The number 35 means lid for the 300 mm × 200 mm size containers.
3.5
SLC unit load
load consisting of a SLC which forms a unit for handling, transport, stacking and storage
1) To be published.
© ISO 2016 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO/TS 19709-2:2016(E)

4 Character
...

TECHNICAL ISO/TS
SPECIFICATION 19709-2
First edition
Transport packaging — Small load
container systems —
Part 2:
Column Stackable System (CSS)
Emballage — Systèmes de transport de petites charges —
Partie 2: Systèmes gerbable en colonnes (SGP)
PROOF/ÉPREUVE
Reference number
ISO/TS 19709-2:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO/TS 19709-2:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 19709-2:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Characteristics . 2
5 Dimensions, masses and applied loads . 2
5.1 CSS SLC . 2
5.1.1 Main dimensions and tolerances . 2
5.1.2 Detailed dimensions for CSS SLCs . 3
5.2 Accessories . 6
6 Essential functional features .11
6.1 CSS SLC .11
6.2 Carrying handles .12
6.3 Vertical ribs for lifting grippers .13
6.4 Centering holes .14
6.5 CSS-SLC base .14
7 Material .14
8 Marking and labelling .14
Annex A (informative) Column stacking of palletized loads .15
Annex B (informative) Colours .17
© ISO 2015 – All rights reserved PROOF/ÉPREUVE iii

---------------------- Page: 3 ----------------------
ISO/TS 19709-2:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 122, Packaging.
ISO 19709 consists of the following parts, under the general title Transport packaging — Small load
container systems:
— Part 1: Common requirements and test methods
— Part 2: Column Stackable System (CSS) [Technical Specification]
— Part 3: Bond Stackable System (BSS) [Technical Specification]
iv PROOF/ÉPREUVE © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TS 19709-2:2015(E)

Introduction
The small load container (SLC) system specified in this part of ISO 19709 was first conceived for
handling, storage and transport of goods and designed to meet the needs of automotives manufacturers
and their suppliers.
The multi-functional design of its elements allow a SLC system manufactured in accordance with
ISO 19709 to meet the requirements of different manual, mechanical and automatic handling, transport
and storage systems in the automotive industry transportation chain. It is likely that this system of
SLCs and accessories will frequently be used in a pool.
The special characteristic of the system specified in ISO 19709 is the self-securing mechanism of the
unit load in the column stack. For this reason, this system is called column stackable system.
The CS system consists of the following elements:
— CSS-SLC;
— Lid [the prefix “D” reflects the German term for “lid” (Deckel)];
— Pallet cover [the prefix “A” reflects the German term for “cover” (Abdeckung)].
The use of CSS-SLC systems with palletized loads is discussed in Annex A.
© ISO 2015 – All rights reserved PROOF/ÉPREUVE v

---------------------- Page: 5 ----------------------
TECHNICAL SPECIFICATION ISO/TS 19709-2:2015(E)
Transport packaging — Small load container systems —
Part 2:
Column Stackable System (CSS)
1 Scope
This part of ISO 19709 specifies the main characteristics and the testing of durable, reusable,
parallelepipedic containers and their accessories which form a column stackable system (CSS) designed
to contain bulk or precisely located component loads up to maximum load of 20 kg used for automotive
industry applications.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
1)
ISO 19709-1:— , Transport packaging — Small load container systems — Part 1: Common requirements
and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 19709-1 and the following apply.
3.1
CSS small load container
small load container (SLC) with special functional features which ensure a mutual compatibility
3.2
pallet cover
system element with a safeguarding and protective function that closes the top of the loading unit with
a level surface that distributes the mass of overlying loads in a stack
3.3
SLC capacity
usable inner volume which is calculated by multiplying the usable inner length by the usable inner
width (both measured at half height) and the usable inner height
3.4
SLC lid (D 65, D 45, D 35)
BSS-SLC and CSS-SLC system elements with virtually neutral height for protection of the cargo
Note 1 to entry: The prefix “D” reflects the German term for “lid” (Deckel).
Note 2 to entry: The number 65 means lid for the 600 mm × 400 mm size containers. The number 45 means lid
for the 400 mm × 300 mm size containers. The number 35 means lid for the 300 mm × 200 mm size containers.
3.5
SLC unit load
load consisting of a SLC which forms a unit for handling, transport, stacking and storage
1) To be published.
© ISO 2015 – All rights reserved PROOF/ÉPREUVE 1

---------------------- Page: 6 ----------------------
ISO/TS 19709-2:2015(E)

4 Characteristics
The heights of CSS SLCs are determined in such a way that when used in combin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.