iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 9200:2024

(Main)

Petroleum measurement systems — Metering of viscous and high temperature liquids

Petroleum measurement systems — Metering of viscous and high temperature liquids

This document gives guidance for measuring a quantity of primarily viscous hydrocarbon liquid using flowmeters at ambient or elevated operating temperatures. This document describes the effects of high viscosities and potentially high temperatures, which can induce additional errors in measurement. It also gives guidance on how to overcome or mitigate difficulties.

Systèmes de mesurage des produits pétroliers — Comptage des liquides visqueux et à haute température

General Information

Status
Published
Publication Date
05-May-2024
ICS
75.180.30 - Volumetric equipment and measurements
Technical Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Drafting Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Current Stage
6060 - International Standard published
Start Date
06-May-2024
Due Date
16-Aug-2025
Completion Date
06-May-2024
Ref Project

Relations

Revises
ISO 9200:1993 - Crude petroleum and liquid petroleum products — Volumetric metering of viscous hydrocarbons
Effective Date
20-Aug-2022

Buy Standard

ISO 9200:2024 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:6. 05. 2024ISO 9200:2024 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:6. 05. 2024
PreviousNext
Standard
ISO 9200:2024 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:6. 05. 2024
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024
PreviousNext
Draft
ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024REDLINE ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024
PreviousNext
Draft
REDLINE ISO/PRF 9200 - Petroleum measurement systems — Metering of viscous and high temperature liquids Released:20. 03. 2024
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 9200
Second edition
Petroleum measurement systems —
2024-05
Metering of viscous and high
temperature liquids
Systèmes de mesurage des produits pétroliers — Comptage des
liquides visqueux et à haute température
Reference number
ISO 9200:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 9200:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 9200:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Properties of high viscosity liquids . 2
4.1 Viscosity .2
4.2 Reynolds number and flow profile .3
4.3 Density .4
4.4 Effect of temperature on viscosity .4
4.5 Examples of high viscosity liquids and behaviour .5
4.6 Further considerations .6
5 Metering systems . 6
5.1 General .6
5.2 Installation .7
5.3 Heating.8
5.4 System start-up and filling .9
6 Flowmeters .
...

International
Standard
ISO 9200
Second edition
Petroleum measurement systems —
Metering of viscous and high
temperature liquids
Systèmes de mesurage des produits pétroliers — Comptage des
liquides visqueux et à haute température
PROOF/ÉPREUVE
Reference number
ISO 9200:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 9200:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 9200:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Properties of high viscosity liquids . 2
4.1 Viscosity .2
4.2 Reynolds number and flow profile .3
4.3 Density .4
4.4 Effect of temperature on viscosity .4
4.5 Examples of high viscosity liquids and behaviour .5
4.6 Further considerations .6
5 Metering systems . 6
5.1 General .6
5.2 Installation .7
5.3 Heating.8
5.4 System start-up and filling .9
6 Flowmeters .
...

2024-02-05
Style Definition
...
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
ISO/DIS PRF 9200:2023(E)
Section start: New page, Header distance from edge:
1.27 cm, Footer distance from edge: 1.27 cm
ISO /TC 28/SC 2/WG 4
Formatted: zzCover large, Adjust space between Latin
and Asian text, Adjust space between Asian text and
Secretariat: BSI
numbers
Formatted: Space After: 0 pt, Adjust space between
Date: 2024-03-20
Latin and Asian text, Adjust space between Asian text
and numbers
Formatted: Cover Title_A1, Adjust space between Latin
Petroleum measurement systems — Metering of viscous and high
and Asian text, Adjust space between Asian text and
temperature liquids
numbers
Systèmes de mesure du pétrole - comptage demesurage des produits pétroliers — Comptage des liquides
visqueux et à haute température
PROOF

---------------------- Page: 1 ----------------------
ISO/DIS 9200:2023(E)
© ISO 2023 2024
Formatted: Default Paragraph Font
Formatted: Indent: Left: 0 cm, Right: 0 cm, Space
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
Before: 0 pt, No page break before, Adjust space
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
between Latin and Asian text, Adjust space between
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
Asian text and numbers
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS 9200:2023(E)
Formatted: Adjust space between Latin and Asian text,
Contents
Adjust space between Asian text and numbers
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Properties of high viscosity liquids . 3
4.1 Viscosity . 3
4.2 Reynolds number and flow profile . 3
4.3 Density . 4
4.4 Effect of temperature on viscosity . 4
4.5 Examples of high viscosity liquids and behaviour . 5
4.6 Further considerations. 6
5 Metering systems. 7
5.1 General . 7
5.2 Installation . 8
5.3 Heating .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 6996(Main)
Bunkering — Meter verification using master Coriolis mass flow meter
  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 4266-2:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels

This document gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, transported aboard marine vessels (i.e. tankers and barges). This document gives guidance for buyers and sellers who mutually agree to use marine ALGs for either fiscal and/or custody transfer applications. This document is not applicable to the measurement of level in refrigerated cargo tanks. NOTE For information on the measurement of level in refrigerated cargo tanks, please see ISO 18132-1 and ISO 18132-3.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 4266-4:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks

This document gives requirements and guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications. The ATT is used for measuring the temperature of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks. This document is not applicable to the measurement of temperature in caverns or in refrigerated storage tanks.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 4266-1:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks

This document gives requirements and guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs). It applies to ALGs which are both intrusive and non-intrusive types, in fiscal/custody transfer applications for measuring the level of petroleum and petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks. This document is not applicable to the measurement of level in refrigerated storage tanks with ALG equipment.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 7278-2:2022(Main)
Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation

This document provides descriptions of the different types of pipe provers, otherwise known as displacement provers, currently in use. These include sphere (ball) provers and piston provers operating in unidirectional and bidirectional forms. It applies to provers operated in conventional, reduced volume, and small volume modes. This document gives guidelines for: — the design of pipe provers of each type; — the calibration methods; — the installation and use of pipe provers of each type; — the interaction between pipe provers and different types of flowmeters; — the calculations used to derive the volumes of liquid measured (see Annex A); — the expected acceptance criteria for fiscal and custody transfer applications, given as guidance for both the calibration of pipe provers and when proving flowmeters (see Annex C). This document is applicable to the use of pipe provers for crude oils and light hydrocarbon products which are liquid at ambient conditions. The principles apply across applications for a wider range of liquids, including water. The principles also apply for low vapour pressure, chilled and cryogenic products, however use with these products can require additional guidance.

  • Standard
    109 pages
    English language
    sale 15% off
  • Standard
    118 pages
    French language
    sale 15% off
ISO
ISO 7507-2:2022(Main)
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method or electro-optical distance-ranging method
SIST ISO 7507-2:2023

This document specifies methods for the calibration of tanks above eight metres in diameter with cylindrical courses that are vertical. It provides two methods for determining the volumetric quantity of the liquid contained within a tank at gauged liquid levels. NOTE For optical-reference-line method, the optical (offset) measurements required to determine the circumferences can be taken internally or externally, provided that insulation is removed if tank is insulated. The methods are suitable for tilted tanks with up to 3 % deviation from the vertical provided that a correction is applied for the measurement tilt, as described in ISO 7507-1. These methods are alternatives to other methods such as strapping (ISO 7507-1) and the optical-triangulation method (ISO 7507-3).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
ISO
ISO 8222:2020/Amd 1:2022(Amendment)
Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) — Amendment 1: Correction of two typographical errors
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 22192:2021(Main)
Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system

This document specifies procedures and requirements for the transfer of bunkers to vessels by bunker tankers using the Coriolis mass flow meter (MFM) system. It encompasses the process leading to the approval of the MFM system as installed on bunker tankers and post-approval bunkering operation. It covers terminology, specifications, requirements and procedures on metrology, system integrity, metering system selection and installation, MFM system verification, bunker delivery and dispute handling. NOTE Local and international regulations, such as the International Convention for the Prevention of Pollution from Ships (MARPOL) can apply.

  • Standard
    49 pages
    English language
    sale 15% off
ISO
ISO/TS 21354:2020(Main)
Measurement of multiphase fluid flow

This document establishes a common basis for, and assistance in, the classification of applications and multiphase meters, as well as guidance and recommendations for the implementation and use of such meters. The so-called in-line multiphase flow meters (MPFMs) that directly measure the oil, water and gas flow rates, as well as the partial- and full-separation MPFMs are the main focus of this document. Conventional two- or three-phase separators are not included in this document. Only limited reference is made to wet-gas meters, since although wet-gas flow is a subset of multiphase flow, wet-gas measurement is covered by ISO/TR 11583 and ISO/TR 12748.

  • Technical specification
    98 pages
    English language
    sale 15% off
ISO
ISO 8222:2020(Main)
Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications. This document excludes measures for cryogenic liquids and pressurized measures as used for liquid petroleum gas (LPG) and liquefied natural gas (LNG). Volumetric measures are classified as test measures or prover tanks depending on capacity and design. Measures described in this document are primarily designed, calibrated and used to measure volumes from a measure which is wetted and drained for a specified time before use and designated to deliver. Many of the provisions, however, apply equally to measures which are used to measure a volume using a clean and dry measure and designated to contain. Guidance is given regarding commonly expected uncertainties and calibration specifications. The document also provides, in Annex A, reference formulae describing the properties of water and other fluids and materials used in volumetric measurement more generally.

  • Standard
    70 pages
    English language
    sale 15% off
  • Standard
    78 pages
    French language
    sale 15% off