ISO 17266:2002

Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions

ISO 17266:2002 specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture films.

Cinématographie — Enregistrements des commandes et du son photographiques analogiques et numériques multicanaux sur copies et négatifs cinématographiques 35 mm, et enregistrements des commandes sonores numériques sur copies et négatifs cinématographiques 70 mm — Position et dimensions en largeur

General Information

• Status: Withdrawn
• Publication Date: 10-Jul-2002
• Withdrawal Date: 10-Jul-2002
• ICS: 37.060.20 - Motion picture films. Cartridges
• Technical Committee: ISO/TC 36 - Cinematography
• Drafting Committee: ISO/TC 36 - Cinematography
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 09-Feb-2018

Relations

• Revised: ISO 17266:2018 - Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions
• Effective Date: 02-Sep-2017

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17266
First edition
2002-07-15


Cinematography — Multichannel analogue
and digital photographic sound and control
records on 35 mm motion-picture prints
and negatives, and digital sound-control
records on 70 mm motion-picture prints
and negatives — Position and width
dimensions
Cinématographie — Enregistrements des commandes et du son
photographiques analogiques et numériques multicanaux sur copies et
négatifs cinématographiques 35 mm, et enregistrements des commandes
sonores numériques sur copies et négatifs cinématographiques 70 mm —
Position et dimensions en largeur




Reference number
ISO 17266:2002(E)
©
 ISO 2002

---------------------- Page: 1 ----------------------
ISO 17266:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland

ii © ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17266:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17266 was prepared by Technical Committee ISO/TC 36, Cinematography.

© ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 17266:2002(E)

Cinematography — Multichannel analogue and digital
photographic sound and control records on 35 mm motion-picture
prints and negatives, and digital sound-control records on 70 mm
motion-picture prints and negatives — Position and width
dimensions
1 Scope
This International Standard specifies the lateral, and vertical where applicable, positions and width dimensions of
multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-
picture prints and negatives.
2 Positions and dimensions
2.1 The general positions of analogue, control and digital tracks for 35 mm motion-picture film are shown in
Figure 1.
2.2 The positions and dimensions of the analogue area shall be as shown in Figure 2 and given in Table 1.
2.3 The positions and dimensions of the type I digital sound records for positive print film shall be as shown in
Figure 3 and given in Table 2.
2.4 The positions and dimensions of the type I digital sound records for negative film shall be as shown in
Figure 3 and given in Table 3.
2.5 The positions and dimensions of the type II digital sound records for positive print film shall be as shown in
Figure 4 and given in Table 4.
2.6 The positions and dimensions of the type II digital sound records for negative film shall be as shown in
Figure 4 and given in Table 5.
2.7 The positions and dimensions of the type III digital control track for positive print film shall be as shown in
Figure 5 and given in Table 6.
2.8 The positions and dimensions of the type III digital control track for negative film shall be shown in Figure 5
and given in Table 7.
2.9 The positions and dimensions of the
...