ISO 24225:2022

Ships and marine technology — Pneumatic quick-closing control devices

This document specifies the terms and definitions, design, system components, classification, technical requirements and test methods of marine pneumatic quick-closing control devices. It also addresses system pressures, automatic controls, alarms, signal feedback, performance test methods, safety, packaging and handling of pneumatic quick-closing control devices. This document applies to the design, manufacture and acceptance of pneumatic quick-closing control devices.

Navires et technologie maritime — Dispositifs de commande pneumatiques à fermeture rapide

General Information

• Status: Published
• Publication Date: 22-Jun-2022
• ICS: 47.020.01 - General standards related to shipbuilding and marine structures
• Technical Committee: ISO/TC 8/SC 3 - Piping and machinery
• Drafting Committee: ISO/TC 8/SC 3/WG 17 - Remote shutdown systems
• Current Stage: 6060 - International Standard published
• Start Date: 23-Jun-2022
• Due Date: 24-Jun-2022
• Completion Date: 23-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24225
First edition
2022-06
Ships and marine technology —
Pneumatic quick-closing control
devices
Navires et technologie maritime — Dispositifs de commande
pneumatiques à fermeture rapide
Reference number
ISO 24225:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 24225:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24225:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design . 2
4.1 System composition . 2
4.2 Requirements . 4
4.3 Materials . 5
4.4 Classifications and types . 5
5 Performance . 6
5.1 Strength . 6
5.2 Tightness . 6
5.3 Operational performance. 6
5.4 Air fluctuation . 6
5.5 Electrical properties. 6
5.5.1 Power supply fluctuation . 6
5.5.2 Power supply fault . 7
5.5.3 Insulation resistance . 7
5.5.4 Voltage withstanding . 7
5.6 Environmental adaptability . 7
5.6.1 Dry heat and cold . 7
5.6.2 Damp heat . 7
5.6.3 Inclination and swinging . 8
5.6.4 Vibration . 8
5.6.5 Salt mist . 8
5.6.6 IP code . 8
5.7 Electromagnetic compatibility. 8
6 Test and inspection .8
6.1 Strength test . 8
6.2 Leakage test . 8
6.3 Operational performance. 9
6.4 Air supply fluctuation . 9
6.5 Power supply fluctuation . 9
6.6 Power supply fault . 9
6.7 Insulation resistance. 9
6.8 Voltage withstanding . 9
6.9 Dry heat. 9
6.10 Cold . 9
6.11 Cyclic damp heat . 9
6.12 Inclination and swinging . 10
6.13 Vibration . 10
6.14 Salt mist . 10
6.15 IP code . 10
6.16 Electromagnetic compatibility. 10
7 Marking, packaging, handling and storage .10
7.1 Marking . 10
7.2 Packaging . 10
7.3 Handling and storage . 11
Bibliography .12
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 24225:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC8, Ships and marine technology,
Subcommittee SC3, Piping and machinery.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 24225:2022(E)
Introduction
A pneumatic quick-closing control device is a remote operation system used to control quick-closing
valves, fire dampers and shutters of marine quick-closing systems. It plays a vital role in protecting the
safety of ships and offshore facilities, and reducing fire losses. It also helps to ensure compliance with
the requirements specified in the applicable sections of The International Convention for the Safety of
[1]
Life at Sea (SOLAS) .
v
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 24225:2022(E)
Ships and marine technology — Pneumatic quick-closing
control devices
1 Scope
This document specifies the terms and definitions, design, system components, classification, technical
requirements and test methods of marine pneumatic quick-closing control devices. It also addresses
system pressures, automatic controls, alarms, signal feedback, performance test methods, safety,
packaging and handling of pneumatic quick-closing control devices.
This document applies to the design, manufacture and acceptance of pneumatic quick-closing control
devices.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 780, Packaging — Distribution packaging — Graphical symbols for handling and storage of packages
GB/T 13306, Plates
IEC 60068-2-1, Environmental testing — Part 2-1: Tests — Test A: Cold
IEC 60068-2-2, Environmental testing — Part 2-2: Tests — Test B: Dry heat
IEC 60068-2-30, Environmental testing — Part 2-30: Tests — Test Db: Damp heat cyclic
IEC 60068-2-6, Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal)
IEC 60068-2-11, Basic environmental testing procedures — Part 2-11: Tests — Test Ka: Salt mist
IEC 61000-4-5, Electromagnetic compatibility — Testing and measurement techniques —Surge immunity
test
IEC 60529, Degrees of protection provided by enclosures (IP code)
IEC 60533, Electrical and electronic installations in ships — Electromagnetic compatibility (EMC) – Ships
with a metallic hull
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
pneumatic quick-closing control device
PQCD
system installation that realizes remote fast operation, status display and alarms via remote control to
devices such as pneumatic quick-closing valves, pneumatic fire dampers and pneumatic shutters
1
© ISO 2022 – All rights reserved

---------------------- Page: 6 ----------------------
ISO 24225:2022(E)
3.2
control and display panel
electrical panel for electric-controlled operation and status display where the quick-closing device is
installed
3.3
remote control and display cabinet
electrical cabinet for electric-controlled operation and status display in a location away from the quick-
closing device (such as a control room)
4 Design
4.1 System composition
A pneumatic quick-closing system is composed of a pneumatic quick-closing control device (PQCD),
pipelines and the objects to be controlled, such as pneumatic quick-closing valves, pneumatic fire
dampers and pneumatic shutters.
Other components in the PQCD system, including valves and piping, are illustrated in Figure 1.
2
  © ISO 2022 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 24225:2022(E)
Key
1 air filter
2 inlet valve
3 compressed air tank
4 safety valve
5 pressure transducer
6 pressure gauge
7 meter three-way test valve
8 meter
...