Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol

ISO 22666:2016 defines the AOS Space Data Link Protocol in terms of: a) the services provided to the users of this protocol; b) the protocol data units employed by the protocol; and c) the procedures performed by the protocol. It does not specify: a) individual implementations or products; b) the implementation of service interfaces within real systems; c) the methods or technologies required to perform the procedures; or d) the management activities required to configure and control the protocol.

Systèmes de transfert des données et informations spatiales — Protocole de liaison pour données spatiales AOS (systèmes perfectionnés sur orbite)

General Information

Status
Published
Publication Date
02-Nov-2016
Current Stage
9093 - International Standard confirmed
Completion Date
14-Nov-2023
Ref Project

Relations

Buy Standard

Standard
ISO 22666:2016 - Space data and information transfer systems -- AOS (advanced orbiting systems) space data link protocol
English language
96 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22666
Third edition
2016-11-15
Space data and information transfer
systems — AOS (advanced orbiting
systems) space data link protocol
Systèmes de transfert des données et informations spatiales —
Protocole de liaison pour données spatiales AOS (systèmes
perfectionnés sur orbite)
Reference number
ISO 22666:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 22666:2016(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2016
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Ch. de Blandonnet 8  CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22666:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT)
see the following URL: Foreword - Supplementary information
ISO 22666 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCSDS
232.0-B-3, September 2015) and was adopted (without modifications except those stated in clause 2 of this
International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee
SC 13, Space data and information transfer systems.
This third edition cancels and replaces the second edition (ISO 22666:2007), which has been technically
revised. It also incorporates the amendment ISO 22666:2007/Amd.1:2015.
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 22666:2016(E)
CCSDS RECOMMENDED STANDARD FOR TM SPACE DATA LINK PROTOCOL
STATEMENT OF INTENT
The Consultative Committee for Space Data Systems (CCSDS) is an organization officially
established by the management of its members. The Committee meets periodically to address
data systems problems that are common to all participants, and to formulate sound technical
solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary,
the results of Committee actions are termed Recommended Standards and are not
considered binding on any Agency.
This Recommended Standard is issued by, and represents the consensus of, the CCSDS
members. Endorsement of this Recommendation is entirely voluntary. Endorsement,
however, indicates the following understandings:
o Whenever a member establishes a CCSDS-related standard, this standard will be in
accord with the relevant Recommended Standard. Establishing such a standard
does not preclude other provisions which a member may develop.
o Whenever a member establishes a CCSDS-related standard, that member will
provide other CCSDS members with the following information:
-- The standard itself.
-- The anticipated date of initial operational capability.
-- The anticipated duration of operational service.
o Specific service arrangements shall be made via memoranda o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.