ISO/IEC TR 11580:2007
(Main)Information technology — Framework for describing user interface objects, actions and attributes
Information technology — Framework for describing user interface objects, actions and attributes
ISO/IEC TR 11580:2007 defines a format for describing user interface objects, actions and attributes. It provides a basis for standardizing the names and properties of user interface objects, actions and attributes across multiple applications and platforms. ISO/IEC TR 11580:2007 contains guidance both on the standardization of user interface objects, actions and attributes and on the implementation of these objects, actions and attributes in any or all modalities. It is primarily intended for developers of standards, style guides and architectures involving user interface objects, actions and attributes. ISO/IEC TR 11580:2007 also provides software developers with a range of functionalities to be considered in the design of objects, actions and attributes within user interfaces.
Technologies de l'information — Modèle pour décrire des objets, des actions et des attributs pour l'interface utilisateur
General Information
Standards Content (Sample)
TECHNICAL ISO/IEC
REPORT TR
11580
First edition
2007-03-15
Information technology — Framework for
describing user interface objects, actions
and attributes
Technologies de l'information — Modèle pour décrire des objets, des
actions et des attributs pour l'interface utilisateur
Reference number
ISO/IEC TR 11580:2007(E)
©
ISO/IEC 2007
---------------------- Page: 1 ----------------------
ISO/IEC TR 11580:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2007 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC TR 11580:2007(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Terms and definitions .1
3 Modelling objects, actions, and attributes.3
4 Common properties of objects, actions, and attributes.5
4.1 Software identification of objects, actions, and attributes .5
4.1.1 Internal properties of objects, actions, and attributes .5
4.1.2 Internal properties of implemented objects, actions, and attributes.5
4.1.3 Standard internal identifiers.5
4.1.4 Standard of internal states of objects, actions, and attributes .5
4.1.5 Specification of internal identifiers .6
4.1.6 Implementation of internal identifier .6
4.2 Information properties of objects, actions, and attributes .6
4.2.1 Labels .6
4.2.2 Uniqueness of labels.6
4.2.3 Understandability of labels .6
4.2.4 Descriptions.6
4.2.5 States.7
4.2.6 Standard information properties of objects, actions, and attributes.7
4.2.7 Clear and unambiguous purpose .7
4.2.8 Standardized English version of labels, descriptions, and state information.7
4.2.9 Use of information properties of objects, actions, and attributes .7
4.2.10 Result of selection of a label.7
4.2.11 User control of labels.7
4.2.12 User control of descriptions .7
4.2.13 Standardized translations of labels and descriptions.8
4.2.14 Language of labels, descriptions, and state information.8
4.2.15 Developer based translations of labels and descriptions.8
4.2.16 Implementation of alternate languages.8
4.3 Representation properties of objects, actions, and attributes.8
4.3.1 Use of representation properties of objects, actions, and attributes .8
4.3.2 Textual properties .8
4.3.3 Iconic representation .8
4.3.4 Tonal representation.8
4.3.5 Tactile and Haptic representation.9
4.3.6 Standard representation properties of objects, actions, and attributes .9
4.3.7 Variations of representations.9
4.3.8 Cultural and linguistic sensitivity of representations .9
4.4 Operational properties of objects, actions, and attributes .9
4.4.1 Separation of operations .9
4.4.2 Selection of an object, action, or attribute.9
4.4.3 Obtaining information.10
4.4.4 Modifying values .10
4.4.5 Removing and restoring items.10
4.4.6 Activation of function.10
4.5 Technical specifications.10
5 Optional properties .10
5.1 Attribute specific optional properties .10
© ISO/IEC 2007 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC TR 11580:2007(E)
5.1.1 Inclusion of attribute specific optional properties. 10
5.1.2 Values . 11
5.1.3 Constraints. 11
5.1.4 Permitted values . 11
5.1.5 Default values. 11
5.1.6 Higher structure. 11
5.1.7 Peer structure. 11
5.1.8 Lower structure. 11
5.1.9 Physical structure. 11
5.2 Operation specific optional properties. 11
5.2.1 Inclusion of operational specific optional properties.11
5.2.2 Pre-conditions. 12
5.2.3 Post-conditions. 12
5.2.4 Error conditions. 12
Annex A (informative) Developers of this Technical Report. 13
iv © ISO/IEC 2007 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC TR 11580:2007(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
In exceptional circumstances, the joint technical committee may propose the publication of a Technical Report
of one of the following types:
— type 1, when the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts;
— type 2, when the subject is still under technical development or where for any other reason there is the
future but not immediate possibility of an agreement on an International Standard;
— type 3, when the joint technical committee has collected data of a different kind from that which is
normally published as an International Standard (“state of the art”, for example).
Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether
they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to
be reviewed until the data they provide are considered to be no longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC TR 11580, which is a Technical Report of type 2, was prepared by Joint Technical Committee
ISO/IEC JTC 1, Information technology, Subcommittee SC 35, User interfaces.
© ISO/IEC 2007 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/IEC TR 11580:2007(E)
Introduction
As end users are involved with more and more different applications, they use similar or equivalent objects,
actions and attributes that have been implemented in very different ways from one another. This leads to an
increasing need for developing usable standards for user interface objects, actions and attributes. However,
as each new standard is proposed, it can choose which aspects to emphasize and which to omit regarding the
user interface objects, actions and attributes that it describes.
a) The lack of a format for describing user interface objects, actions and attributes has led to a number of
different standards being developed that only partially describe their names and/or properties. This
provides developers with incomplete guidance and leads to the development of similar but incompatible
user interface objects, actions and attributes.
b) There is an increasing need to provide consistent standards for user interface objects, actions and
attributes. This Technical Report will support this activity.
This Technical Report provides a format and guidance for describing and implementing user interface objects,
actions and attributes.
vi © ISO/IEC 2007 – All rights reserved
---------------------- Page: 6 ----------------------
TECHNICAL REPORT
ISO/IEC TR 11580:2007(E)
Information technology — Framework for describing user
interface objects, actions and attributes
1 Scope
This Technical Report defines a format for describing user interface objects, actions and attributes. It
provides a basis for standardizing the names and properties of user interface objects, actions and
attributes across multiple applications and platforms.
NOTE User interface objects as defined and discussed in this Technical Report are not necessarily equivalent
to objects in the software engineering sense. All elements of the user interface which are separately identifiable by the
user can be considered to be user interface objects, regardless of how they are technically implemented. This Technical
Report focuses on their functionalities without specifying a particular method of implementation.
This Technical Report contains guidance both on the standardization of user interface objects, actions and
attributes and on the implementation of these objects, actions and attributes in any or all modalities. This
Technical Report is primarily intended for developers of standards, style guides, and architectures involving
user interface objects, actions and attributes.
EXAMPLE It is used as the basis for icon-specific accessibility guidance in ISO/IEC 19766.
This Technical Report also provides software developers with a range of functionalities to be considered
in the design of objects, actions and attributes within user interfaces.
2 Terms and definitions
2.1
object
user interface object
entity of the user interface that is presented to the user by the software
NOTE 1 Object, as defined in this Technical Report refers to a user interface object (also known as a “user interface
element” in ISO 9241-171:2006. These user interface objects may be implemented via any programming method and
need not be implemented via object-oriented programming.
NOTE 2 User interface objects may or may not be interactive.
NOTE 3 User interface objects may be containers that serve to group one or more other objects.
NOTE 4 Examples of user interface objects in a graphical user interface include window title bars, menu items, push
buttons, image maps, editable text fields and various types of containers (such as windows, grouping boxes, menu bars,
menus, groups of mutually-exclusive option buttons, and compound images that are made up of several smaller images).
Examples of user interface objects in an audio user interface include such things as menus, menu items, messages and
action prompts. Examples of user interface objects in a tactile user interface include such things as tactile controls, Braille
pads, tactile maps, soft balls and virtual wells.
2.2
attribute
data item that modifies or describes some aspect of an action or an object
NOTE An attribute can be treated as an object.
1
© ISO/IEC 2007 – All rights reserved
---------------------- Page: 7 ----------------------
ISO/IEC TR 11580:2007(E)
2.3
action
user behaviour that a system accepts as a request for a particular operation
EXAMPLES Pressing a key, clicking a mouse button, moving the pointer over an object, speaking a command.
2.4
operation
predefined system behaviour that a user initiates
EXAMPLES Sending mail, printing, modifying the data or properties of an object.
NOTE A user performs an action or a set of actions to initiate an operation.
2.5
function
task-specific operation of an object
NOTE Objects can have zero, one or many functions.
2.6
internal identifier
language-independent information intended to ensure system-based recognition of a particular user interface
object, action or attribute
2.7
state
status of an object, action or attribute which is related to the currently permitted interactions with the object,
action or attribute
2.8
label
language-dependent information used to name an object, action or attribute
NOTE This can include information in various languages, e.g. English, Japanese, Blissymbols.
2.9
description
language-dependent set of words used to clarify the meaning of a particular user interface object, action or
attribute for the user
2.10
selection
explicitly identifying an object, attribute or operation that is intended as the target for subsequent action
NOTE When a mouse is used, selection is performed by clicking once on a mouse button; then, a second click is
used to initiate the default function of the selected item.
2.11
selection indication
cue that indicates the selected object, attribute or operation to which the user may apply a subsequent action
NOTE An object is visually highlighted when selected.
2.12
activation
initiation of a selected function of an object
NOTE When a mouse is used, the activation function is performed by double clicking on a mouse button.
2 © ISO/IEC 2007 – All rights reserved
---------------------- Page: 8 ----------------------
ISO/IEC TR 11580:2007(E)
3 Modelling objects, actions, and attributes
This clause provides a framework for modelling and structuring groups of objects, actions, and/or attributes.
This framework is presented both at a high level and at a detailed level. This framework identifies a logical set
of components that can be used for analyzing, designing, evaluating, and standardizing objects, actions,
and/or attributes.
All components of an interface, which are produced by the system, including attributes of components,
can be considered to be user interface objects.
All methods of interacting with user interface objects, which are produced by the user and recognized by
the system, can be considered to be actions.
Attributes contain data that can be used to modify obje
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.