ISO/FDIS 7061
(Main)Ships and marine technology — Aluminium shore gangways for seagoing vessels
Ships and marine technology — Aluminium shore gangways for seagoing vessels
Navires et technologie maritime — Planchons en aluminium pour navires de haute mer
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/TC 8/SC 1
Ships and marine technology —
Secretariat: ANSI
Aluminium shore gangways for
Voting begins on:
seagoing vessels
2024-07-08
Navires et technologie maritime — Planchons en aluminium pour
Voting terminates on:
navires de haute mer
2024-09-02
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 8/SC 1
Ships and marine technology —
Secretariat: ANSI
Aluminium shore gangways for
Voting begins on:
seagoing vessels
Navires et technologie maritime — Planchons en aluminium pour
Voting terminates on:
navires de haute mer
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Types . 2
4.1 General .2
4.2 Type A: decking plate gangway .2
4.3 Type B: arc-shaped steps gangway.2
5 Dimensions . 2
5.1 General .2
5.2 Overall length .4
5.3 Width .4
5.4 Distance between steps .4
5.5 Handrail height.5
5.6 Distance between stanchions .5
5.7 Arc degree . .5
6 Materials . 5
7 Design and construction . 6
7.1 General design features .6
7.2 Design loading .6
7.3 Factor of safety .7
7.4 Side frames .7
7.5 Cross-members.7
7.6 Decking plate . .7
7.7 Steps .7
7.8 Stanchions.7
7.9 Handrail and guard rail .7
7.10 Toe-boards.8
7.11 Roller or wheels .8
7.12 Securing device attachments.8
7.13 Lifting lugs.8
7.14 Anti-slip lugs .8
7.15 Manufacturing tolerance .8
7.16 Surface requirements and guidance .8
8 Quality of manufacture . 9
9 Acceptance tests . 9
9.1 General .9
9.2 Type test .9
9.3 Individual test .9
9.4 Test methods .9
9.4.1 Lifting .9
9.4.2 Initial sag .9
9.4.3 Deflection under load .10
10 Inspections . 10
11 Marking . .10
Bibliography .12
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subc
...
ISO/FDIS 7061:2024(Een)
Style Definition: Heading 1: Indent: Left: 0 pt, First
line: 0 pt, Tab stops: Not at 21.6 pt
Date: 2024-05-0206-21
Style Definition: Heading 2: Font: Bold, Tab stops: Not
at 18 pt
Secretariat: ANSI
Style Definition: Heading 3: Font: Bold
ISO TC 8/SC 1/WG 2
Style Definition: Heading 4: Font: Bold
Style Definition: Heading 5: Font: Bold
Ships and marine technology —Aluminium shore gangways for seagoing vessels
Style Definition: Heading 6: Font: Bold
Navires et technologie maritime — Planchons en aluminium pour navires de haute mer
Style Definition: ANNEX
Style Definition: zzCopyright
Style Definition: Hashtag1
Style Definition: Mention1
Style Definition: Smart Hyperlink1
Style Definition: Unresolved Mention2
Style Definition: AMEND Terms Heading: Font: Bold
Style Definition: AMEND Heading 1 Unnumbered:
Font: Bold
Formatted: French (Switzerland)
Formatted: French (Switzerland)
Formatted: French (Switzerland)
Formatted: French (Switzerland)
Formatted: Font color: Auto, French (Switzerland)
Formatted: French (Switzerland)
Formatted: English (United Kingdom)
Formatted: English (United Kingdom)
Formatted: Indent: Left: 0 pt, Right: 0 pt, Space
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
Before: 0 pt, No page break before, Adjust space
part of this publication may be reproduced or utilized otherwise in any form or by any means,
between Latin and Asian text, Adjust space between
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
Asian text and numbers
prior written permission. Permission can be requested from either ISO at the address below or
Formatted: Default Paragraph Font
ISO’sISO's member body in the country of the requester.
Formatted: Default Paragraph Font
ISO copyright officeCopyright Office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Formatted: Indent: Left: 0 pt, First line: 0 pt, Right: 0
pt, Adjust space between Latin and Asian text, Adjust
Phone: + 41 22 749 01 11
space between Asian text and numbers
Email: copyright@iso.org
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Formatted: Indent: Left: 0 pt, First line: 0 pt, Right: 0
pt, Adjust space between Latin and Asian text, Adjust
Published in Switzerland.
space between Asian text and numbers
ii © ISO 2024 – All rights reserved
Formatted: Centered
Contents
Foreword . 5
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Types . 2
4.1 General . 2
4.2 Type A: decking plate gangway . 2
4.3 Type B: arc-shaped steps gangway . 2
5 Dimensions . 3
5.1 General . 3
Figure 1 — General arrangement of a Type A gangway . 3
Figure 2 — General arrangement of a Type B gangway . 4
5.2 Overall length . 4
5.3 Width . 4
5.4 Distance between steps . 4
5.5 Handrail height . 5
5.6 Distance between stanchions . 5
5.7 Arc degree . 5
6 Materials. 5
Table 1 — Materials for gangway components . 5
7 Design and construction. 6
7.1 General design features . 6
7.2 Design loading. . 7
7.3 Factor of safety . 7
7.4 Side frames . 7
7.5 Cross-members . 7
7.6 Decking plate . 7
7.7 Steps . 7
7.8 Stanchions . 7
7.9 Handrail and guard rail . 8
7.10 Toe-boards. 8
7.11 Roller or wheels . 8
7.12 Securing device attachments . 8
7.13 Lifting lugs . 8
7.14 Anti-slip lugs . 8
7.15 Manufacturing tolerance . 8
Table 2 — Manufacturing tolerance of gangway . 9
7.16 Requirement of surface . 9
8 Quality of manufacture . 9
9 Acceptance tests . 9
Formatted: Centered, Space Before: 0 pt, After: 24 pt,
9.1 General . 9
Line spacing: At least 12 pt
iii
9.2 Type test . 9
9.3 Individual test . 10
9.4 Test methods . 10
9.4.1 Lifting. 10
9.4.2 Initial sag . 10
9.4.3 Deflection under load . 10
10 Inspections . 10
11 Marking . 11
Bibliography . 12
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Types . 2
4.1 General . 2
4.2 Type A: decking plate gangway . 2
4.3 Type B: arc-shaped steps gangway . 3
5 Dimensions . 3
5.1 General . 3
5.2 Overall length. 5
5.3 Width . 5
5.4 Distance between steps . 5
5.5 Handrail height. 5
5.6 Distance between stanchions . 5
5.7 Arc degree . 5
6 Materials . 5
7 Design and construction . 7
7.1 General design features . 7
7.2 Design loading . 7
7.3 Factor of safety . 7
7.4 Side frames . 7
7.5 Cross-members . 7
7.6 Decking plate . 8
7.7 Steps . 8
7.8 Stanchions . 8
7.9 Handrail and guard rail . 8
7.10 Toe-boards . 8
7.11 Roller or wheels .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.