ISO/IEC 18000-64:2012

Information technology — Radio frequency identification for item management — Part 64: Parameters for air interface communications at 860 MHz to 960 MHz Type D

ISO/IEC 18000-64:2012 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. ISO/IEC 18000-64:2012 specifies the physical and logical requirements for a passive-backscatter, Tag Only Talks After Listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not. ISO/IEC 18000-64:2012 contains Type D. Type D is TOTAL based on Pulse Position Encoding or Miller M=2 encoded subcarrier. ISO/IEC 18000-64:2012 specifies physical interactions (the signalling layer of the communication link) between Interrogators and tags, Interrogator and tag operating procedures, the collision arbitration scheme used to identify a specific tag in a multiple-tag environment.

Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 64: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type D

General Information

• Status: Published
• Publication Date: 12-Jul-2012
• ICS: 35.040 - Information coding
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
• Drafting Committee: ISO/IEC JTC 1/SC 31/WG 4 - Radio communications
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 30-Sep-2023

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 18000-64
First edition
2012-07-15


Information technology — Radio
frequency identification for item
management —
Part 64:
Parameters for air interface
communications at 860 MHz to 960 MHz
Type D
Technologies de l'information — Identification par radiofréquence
(RFID) pour la gestion d'objets —
Partie 64: Paramètres de communications d'une interface radio entre
860 MHz et 960 MHz, Type D




Reference number
ISO/IEC 18000-64:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 18000-64:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 18000-64:2012(E)
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Conformance . 1
2.1 Claiming conformance . 1
2.2 Interrogator conformance and obligations . 2
2.3 Tag conformance and obligations . 2
3 Normative references . 2
4 Terms, definitions, symbols and abbreviated terms . 3
4.1 Terms and definitions . 3
4.2 Symbols . 3
4.3 Abbreviated terms . 4
5 Overview . 5
5.1 Parameter tables . 5
6 Type D . 8
6.1 Physical layer . 8
6.1.1 Interrogator power-up waveform . 8
6.1.2 Interrogator power-down . 9
6.1.3 Frequency hopping carrier rise and fall times . 10
6.2 Protocol overview . 11
6.2.1 General . 11
6.2.2 Protocol parameter values . 12
6.2.3 Tag arbitration . 12
6.2.4 Operating procedure . 13
6.2.5 TagMsg .
...