Ships and marine technology -- Flange connection for fuel and lubrication oil bunkering -- Basic dimensions and technical requirements

This document specifies the basic dimensions of PN 10 flanged connections for bunker fuel and lubricating oil transfer to ships from bunkering vessels or onshore facilities, and the technical requirements for the design of such connections. This document is not applicable to connections of the ship's fuel system for the reception of liquefied natural gas.

Titre manque

General Information

Status
Published
Publication Date
21-Mar-2021
Current Stage
5060 - Close of voting Proof returned by Secretariat
Start Date
17-Feb-2021
Completion Date
17-Feb-2021
Ref Project

Buy Standard

Standard
ISO 23212:2021 - Ships and marine technology -- Flange connection for fuel and lubrication oil bunkering -- Basic dimensions and technical requirements
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 23212:Version 30-jan-2021 - Ships and marine technology -- Flange connection for fuel and lubrication oil bunkering -- Basic dimensions and technical requirements
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 23212
First edition
2021-03
Ships and marine technology — Flange
connection for fuel and lubrication oil
bunkering — Basic dimensions and
technical requirements
Reference number
ISO 23212:2021(E)
ISO 2021
---------------------- Page: 1 ----------------------
ISO 23212:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 23212:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification ............................................................................................................................................................................................................ 1

5 Basic dimensions.................................................................................................................................................................................................. 2

6 Technical requirements ................................................................................................................................................................................ 5

6.1 Dimensions ................................................................................................................................................................................................. 5

6.2 Pressure rating ........................................................................................................................................................................................ 6

6.3 Fasteners ...................................................................................................................................................................................................... 6

6.4 Materials ....................................................................................................................................................................................................... 6

6.5 Coatings ......................................................................................................................................................................................................... 6

6.6 Marking ......................................................................................................................................................................................................... 6

6.7 Packaging ..................................................................................................................................................................................................... 7

6.8 Installation .................................................................................................................................................................................................. 7

© ISO 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 23212:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received.

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology,

Subcommittee SC 3, Piping and machinery.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 23212:2021(E)
Ships and marine technology — Flange connection for fuel
and lubrication oil bunkering — Basic dimensions and
technical requirements
1 Scope

This document specifies the basic dimensions of PN 10 flanged connections for bunker fuel and

lubricating oil transfer to ships from bunkering vessels or onshore facilities, and the technical

requirements for the design of such connections.

This document is not applicable to connections of the ship's fuel system for the reception of liquefied

natural gas.
2 Normative refe
...

INTERNATIONAL ISO
STANDARD 23212
First edition
Ships and marine technology — Flange
connection for fuel and lubrication oil
bunkering — Basic dimensions and
technical requirements
PROOF/ÉPREUVE
Reference number
ISO 23212:2021(E)
ISO 2021
---------------------- Page: 1 ----------------------
ISO 23212:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 23212:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification ............................................................................................................................................................................................................ 1

5 Basic dimensions.................................................................................................................................................................................................. 2

6 Technical requirements ................................................................................................................................................................................ 5

6.1 Dimensions ................................................................................................................................................................................................. 5

6.2 Pressure rating ........................................................................................................................................................................................ 6

6.3 Fasteners ...................................................................................................................................................................................................... 6

6.4 Materials ....................................................................................................................................................................................................... 6

6.5 Coatings ......................................................................................................................................................................................................... 6

6.6 Marking ......................................................................................................................................................................................................... 6

6.7 Packaging ..................................................................................................................................................................................................... 7

6.8 Installation .................................................................................................................................................................................................. 7

© ISO 2021 – All rights reserved PROOF/ÉPREUVE iii
---------------------- Page: 3 ----------------------
ISO 23212:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received.

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology,

Subcommittee SC 3, Piping and machinery.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 23212:2021(E)
Ships and marine technology — Flange connection for fuel
and lubrication oil bunkering — Basic dimensions and
technical requirements
1 Scope

This document specifies the basic dimensions of PN 10 flanged connections for bunker fuel and

lubricating oil transfer to ships from bunkering vessels or onshore facilities, and the technical

requirements for the design of such connections.

This document is not applicable to connections of the ship's fuel system for the reception of liquefied

natural gas.
2 Normative references
The following documents
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.