ISO 6963:2024
(Main)Bunker cargo loading from oil terminal to bunker tanker using Coriolis mass flow meter
Bunker cargo loading from oil terminal to bunker tanker using Coriolis mass flow meter
This document specifies quantity measurement using a Coriolis mass flow meter (MFM) for bunker cargo loading from an oil terminal to a bunker tanker during custody transfer. Sampling requirements during the custody transfer are also included in this document.
Chargement d'une cargaison de soute depuis le terminal pétrolier vers un navire avitailleur à l'aide d'un compteur massique à effet Coriolis
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 6963
First edition
Bunker cargo loading from oil
2024-05
terminal to bunker tanker using
Coriolis mass flow meter
Chargement d'une cargaison de soute depuis le terminal pétrolier
vers un navire avitailleur à l'aide d'un compteur massique à effet
Coriolis
Reference number
ISO 6963:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 6963:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 6963:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Application . 6
5 Metrological requirements . . 7
5.1 General .7
5.2 Mass flow meter requirements .7
5.3 MFM measuring system requirements .8
5.4 Post approval maintenance .9
5.4.1 Meter zero verification frequency .9
5.4.2 Zero verification procedure .9
5.4.3 Meter and ancillary devices verification and/or calibration frequency .9
5.4.4 Software upgrade or update .9
6 System integrity requirements . 9
6.1 General .9
6.2 Metrological control .9
6.2.1 Documentation.
...
FINAL DRAFT
International
Standard
ISO/FDIS 6963
ISO/TC 28/SC 2
Bunker cargo loading from oil
Secretariat: BSI
terminal to bunker tanker using
Voting begins on:
Coriolis mass flow meter
2024-01-19
Chargement d'une cargaison de soute depuis le terminal pétrolier
Voting terminates on:
vers un navire avitailleur à l'aide d'un compteur massique à effet
2024-03-15
Coriolis
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 6963:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 6963:2024(en)
International
Standard
ISO/FDIS 6963
ISO/TC 28/SC 2
Bunker cargo loading from oil
Secretariat: BSI
terminal to bunker tanker using
Voting begins on:
Coriolis mass flow meter
Chargement d'une cargaison de soute depuis le terminal pétrolier
Voting terminates on:
vers un navire avitailleur à l'aide d'un compteur massique à effet
Coriolis
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 6963:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 6963:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Application . 6
5 Metrological requirements . . 7
5.1 General .7
5.2 Mass flow meter requirements .7
5.3 MFM measuring system requirements .8
5.4 Post approval maintenance .
...
ISO/FDIS 6963:2023(E)
ISO/TC 28/SC 2/WG 13
Secretariat: BSI
Date: 2023-MM-DD2024-01-05
Bunker cargo loading from oil terminal to bunker tanker using
Coriolis mass flow meter
Chargement d'une cargaison de soute depuis le terminal pétrolier vers un navire avitailleur à l'aide d'un
compteur massique à effet Coriolis
FDIS stage
---------------------- Page: 1 ----------------------
ISO/FDIS 6963:2024(E)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 6963:2024(E)
Contents
Foreword . vi
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Application . 8
5 Metrological requirements . 8
5.1 General . 8
5.2 Mass flow meter requirements . 8
5.3 MFM measuring system requirements . 9
5.4 Post approval maintenance . 10
5.4.1 Meter zero verification frequency . 10
5.4.2 Zero verification procedure . 10
5.4.3 Meter and ancillary devices verification and/or calibration frequency . 10
5.4.4 Software upgrade or update . 10
6 System integrity requirements . 10
6.1 General . 10
6.2 Metrological control . 11
6.2.1 Documentation . 11
6.2.2 Type approval and pattern evaluation . 11
6.3 Security features . 11
6.3.1 Equipment security .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.