ISO 27145-2:2012/PRF Amd 1

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary — Amendment 1

Véhicules routiers — Mise en application des exigences de communication pour le diagnostic embarqué harmonisé à l'échelle mondiale (WWH-OBD) — Partie 2: Dictionnaire de données communes — Amendement 1

General Information

• Status: Not Published
• ICS: 43.040.10 - Electrical and electronic equipment
• ICS: 43.180 - Diagnostic, maintenance and test equipment
• Technical Committee: ISO/TC 22/SC 31 - Data communication
• Drafting Committee: ISO/TC 22/SC 31 - Data communication
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Completion Date: 02-Oct-2023

Relations

• Amends: ISO 27145-2:2012 - Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary
• Effective Date: 03-Dec-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 27145-2
First edition
2012-08-15
AMENDMENT 1
Road vehicles — Implementation
of World-Wide Harmonized On-
Board Diagnostics (WWH-OBD)
communication requirements —
Part 2:
Common data dictionary
AMENDMENT 1
Véhicules routiers — Mise en application des exigences de
communication pour le diagnostic embarqué harmonisé à l'échelle
mondiale (WWH-OBD) —
Partie 2: Dictionnaire de données communes
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO 27145-2:2012/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 27145-2:2012/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 27145-2:2012/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent right
...

2023-05-15
ISO 27145-2:2022/DAmd 2012/PRF Amd 1:2023(E)
ISO/TC 22/SC 31 N
Secretariat: DIN
Date: 2023-10-02
Road vehicles — Implementation of World-Wide Harmonized On-
Board Diagnostics (WWH-OBD) communication requirements —
Part 2:
Common data dictionary
— AMENDMENT 1
Véhicules routiers — Mise en application des exigences de communication pour le diagnostic embarqué
harmonisé à l'échelle mondiale (WWH-OBD) —Partie 2: Dictionnaire de données communes —
Amendement 1
Partie 2: Dictionnaire de données communes
Document type:  Error! Reference source not found.
Document subtype:  Error! Reference source not found.
Document stage:  Error! Reference source not found.
Document language:  Error! Reference source not found.

Error! Reference source not found.

---------------------- Page: 1 ----------------------
Copyright notice
This
AMENDEMENT 1
FDIS stage
Document type:  Error! Reference source not found.
Document subtype:  Error! Reference source not found.
Document stage:  Error! Reference source not found.
Document language:  Error! Reference source not found.

Error! Reference source not found.

---------------------- Page: 2 ----------------------
ISO 27145-2:2023/DAM 2012/PRF Amd 1:2023(E))
© ISO document is a working draft2012
All rights reserved. Unless otherwise specified, or committee draft and is copyright-protected by ISO. While required
in the reproductioncontext of working drafts or committee drafts in any form for use by participants in the ISO
standards development process is permitted without prior permission from ISO, neither its implementation, no part
of this document nor any extract from itpublication may be reproduced, stored or utilized otherwise in any form or
transmitted in any form for any other purposeby any means, electronic or mechanical, including photocopying, or
posting on the internet or an intranet, without prior written permission from ISO. Permission can be requested from
either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: [e-mail]
Website: www.iso.orgRequests for permission to reproduce this document for the purpose of selling it should be
addressed as shown below or to ISO's member body in the country of the requester:
[Indicate the full address, telephone number, fax number, telex number, and electronic mail address, as
appropriate, of the Copyright Manager of the ISO member body responsible for the secretariat of the TC or SC
within the framework of which the working document has been prepared.]
Reproduction for sales purposes may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.

Published in Switzerland
© ISO 2023 – All rights reserved iii
© ISO 2023 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO 27145-2:2023/DAM 2012/PRF Amd 1:2023(E))
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held
responsible for identifying any or all such patent rights. Details of any patent rights identified during the
development of the document will be in the Introduction and/or on the ISO list of patent declarations
received (see ).
Any trade name used in this document is information given for the convenience of user
...