Carbonaceous materials used in the production of aluminium — Green and calcined coke — Determination of ash content

ISO 8005:2005 specifies a method for the determination of ash in green and calcined coke used in the production of aluminium.

Produits carbonés utilisés pour la production de l'aluminium — Coke cru et coke calciné — Détermination du taux de cendres

General Information

Status
Published
Publication Date
28-Sep-2005
Current Stage
9093 - International Standard confirmed
Completion Date
31-Jan-2020
Ref Project

Relations

Buy Standard

Standard
ISO 8005:2005 - Carbonaceous materials used in the production of aluminium -- Green and calcined coke -- Determination of ash content
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8005
Second edition
2005-10-01

Carbonaceous materials used in the
production of aluminium — Green and
calcined coke — Determination of ash
content
Produits carbonés utilisés pour la production de l'aluminium — Coke
cru et coke calciné — Détermination du taux de cendres




Reference number
ISO 8005:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 8005:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8005:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8005 was prepared by Technical Committee ISO/TC 226, Materials for the production of primary
aluminium.
This second edition cancels and replaces the first edition (ISO 8005:1984), which has been technically revised.
© ISO 2005 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8005:2005(E)
Introduction
The content of ash or inorganic materials in coke is an important property, as ash will accumulate in the
electrolyte when the coke is used for anodes. Constant ash content may also be an indication that the same
raw materials are used.

iv © ISO 2005 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 8005:2005(E)

Carbonaceous materials used in the production of aluminium —
Green and calcined coke — Determination of ash content
1 Scope
This International Standard specifies a method for the determination of ash in green and calcined coke used in
the production of aluminium.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 6375, Carbonaceous materials for the production of aluminium — Cokes for electrodes — Sampling
ASTM Practice E691–99, Standard Practice for Conducting an Interlaboratory Study to Determine the
Precision of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.