iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7250-3:2015

(Main)

Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards

Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards

ISO 7250-3:2015 provides worldwide and regional tables of design ranges for use with product standards for equipment design and safety that require ISO 7250 body measurement data input.

Définitions des mesures de base du corps humain pour la conception technologique — Partie 3: Gammes de conception régionales et mondiales pour utilisation dans les normes de produits

L'ISO 7250-3:2015 fournit des tableaux mondiaux et régionaux de valeurs de conception destinés à être utilisés conjointement aux normes de produit relatives à la conception et à la sécurité des équipements, qui exigent l'entrée des données anthropométriques de l'ISO 7250.

General Information

Status
Published
Publication Date
12-Aug-2015
ICS
13.180 - Ergonomics
Technical Committee
ISO/TC 159/SC 3 - Anthropometry and biomechanics
Drafting Committee
ISO/TC 159/SC 3/WG 1 - Anthropometry
Current Stage
9093 - International Standard confirmed
Completion Date
01-Jul-2022
Ref Project

Relations

Consolidated By
ISO 8394-2:2017 - Buildings and civil engineering works — Determination of extrudability of sealants — Part 2: Using standardized apparatus
Effective Date
06-Jun-2022

Buy Standard

ISO 7250-3:2015 - Basic human body measurements for technological designISO 7250-3:2015 - Basic human body measurements for technological design
PreviousNext
Standard
ISO 7250-3:2015 - Basic human body measurements for technological design
English language
30 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7250-3:2015 - Définitions des mesures de base du corps humain pour la conception technologiqueISO 7250-3:2015 - Définitions des mesures de base du corps humain pour la conception technologique
PreviousNext
Standard
ISO 7250-3:2015 - Définitions des mesures de base du corps humain pour la conception technologique
French language
30 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 7250-3
First edition
2015-08-15
Basic human body measurements for
technological design —
Part 3:
Worldwide and regional design ranges
for use in product standards
Définitions des mesures de base du corps humain pour la conception
technologique —
Partie 3: Gammes de conception régionales et mondiales pour
utilisation dans les normes de produits
Reference number
ISO 7250-3:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 7250-3:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7250-3:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Worldwide and regional design ranges . 2
4 Procedures for establishing design ranges . 2
4.1 Worldwide ranges . 2
4.2 Regional ranges . 3
5 Worldwide design ranges . 3
5.1 Relationship between ISO/TR 7250-2 and this part of ISO 7250 . 3
5.2 Missing or sparse data . 3
5.3 Worldwide design range table (normative) . 4
Annex A (informative) .13
Annex B (informative) .29
Bibliography .30
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 7250-3:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the d
...

NORME ISO
INTERNATIONALE 7250-3
Première édition
2015-08-15
Définitions des mesures de base du
corps humain pour la conception
technologique —
Partie 3:
Gammes de conception régionales et
mondiales pour utilisation dans les
normes de produits
Basic human body measurements for technological design —
Part 3: Worldwide and regional design ranges for use in product
standards
Numéro de référence
ISO 7250-3:2015(F)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 7250-3:2015(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 7250-3:2015(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives .2
3 Valeurs de conception mondiales et régionales .2
4 Procédures de détermination des valeurs de conception .2
4.1 Valeurs mondiales . 2
4.2 Valeurs régionales . 3
5 Valeurs de conception mondiales .4
5.1 Correspondance entre l’ISO/TR 7250-2 et la présente partie de l’ISO 7250 . 4
5.2 Données manquantes ou insuffisantes . 4
5.3 Tableau des valeurs de conception mondiales (normatives) . 4
Annexe A (informative) .13
Annexe B (informative) .29
Bibliographie .30
© ISO 2015 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 7250-3:2015(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents typ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 24227:2023(Main)
Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

This document provides a procedure for the standard validation and reporting protocol of walking speed measurements by technological sensor systems compared with the values provided by the reference method, namely walking speed as measured by a tape measure and a stopwatch. It does not address the detailed or specific uses of various technological sensor systems in healthcare.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO/TR 7250-4:2023(Main)
Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists

This document describes the knowledge and skill required for an experienced anthropometrist who serves as a measurer in anthropometric surveys or a planner of an anthropometric survey. This document also describes methods to quantify the skill of anthropometrists and to report their performance. This document is not a textbook or manual for anthropometry but can be useful for those who plan and conduct anthropometric surveys as well as designers and technologists who utilize anthropometric data. Methods described in this document can also be applicable to measurements other than those described in ISO 7250-1.

  • Technical report
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
ISO
ISO 15535:2023(Main)
General requirements for establishing anthropometric databases

This document specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250-1. It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in this document are people who are able to hold the postures specified in ISO 7250-1. NOTE The traditional anthropometry defined in ISO 7250-1 is considered to be a necessary complement to 3-D methods, which are used in some countries. Scanned data are verified according to the definitions given in ISO 7250-1 (see ISO 20685-1). State-of-the-art software allows integration of traditional anthropometric measures with those obtained by 3-D imaging.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 20685-2:2023(Main)
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

This document establishes protocols for testing of 3-D surface-scanning systems in the acquisition of human body shape data and measurements. It does not apply to instruments that measure the motion of individual landmarks. While mainly concerned with whole-body scanners, this document is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners). It applies to body scanners that measure the human body in a single view. When a hand-held scanner is evaluated, the human operator can contribute to the overall error. When systems are evaluated in which the participant is rotated, movement artefacts can be introduced; these can also contribute to the overall error. This document applies to the landmark positions determined by an anthropometrist. It does not apply to landmark positions automatically calculated by software from the point cloud. The quality of surface shape of the human body and landmark positions is influenced by the performance of scanner systems and humans, including measurers and participants. This document addresses the performance of scanner systems by using artefacts rather than human participants as test objects. Traditional instruments are required to be accurate to the millimetre. Their accuracy can be verified by comparing the instrument with a scale calibrated according to an international standard of length. To verify or specify the accuracy of body scanners, a calibrated test object with known form and size is used. The intended audience is those who use 3-D body scanners to create 3-D anthropometric databases, the users of these data, and body scanner designers and manufacturers. This document intends to provide the basis for agreement on the performance of body scanners between scanner users and scanner providers as well as between 3-D anthropometric database providers and data users.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO/TR 7015:2023(Main)
Ergonomics — The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction)

This document is intended to be used alongside ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector. This document (although the examples shown refer only to the civil construction sector) gives information on how existing standards can be used in a global sector, such as construction. Where biomechanical overload is a relevant aspect, albeit with different characteristics, work-related musculoskeletal disorders (WMSDs) are common and specific preventive actions are needed. This document is intended to: 1) define the user(s) and fields for its application (including non-experts in ergonomics); 2) provide examples of procedures for hazard identification, risk estimation or evaluation and risk reduction in different agricultural settings, through: — more synthetic procedural schemes (main test); — more analytical explanations of the procedures, through mathematical models and application examples, and with the use of specific free simple tools in Annexes A, B and C.

  • Technical report
    120 pages
    English language
    sale 15% off
  • Draft
    120 pages
    English language
    sale 15% off
  • Draft
    120 pages
    English language
    sale 15% off
ISO
ISO 24553:2023(Main)
Ergonomics — Accessible design — Ease of operation

This document provides ergonomic requirements and recommendations for increasing accessibility in terms of ease of operation through the design of products and controls of daily use. It is intended to aid the design of products and equipment that can be handled and manipulated easily and comfortably by people with the widest range of physical characteristics, capabilities and limitations across the widest age range. The requirements and recommendations specified in this document are based on general accessibility considerations as well as specific design considerations based on human physical characteristics, capabilities and limitations related to the operation of products and equipment, such as body size, strength, reach range and dexterity. Some considerations of cognitive factors are also presented. Products and equipment for professional use only, as well as those used only by technical experts, are not covered in this document. Design aspects related only to information and marking are not included. This document includes no general ergonomic requirements or recommendations for manual handling, working postures or safety of machinery but the contents are based on general knowledge of those issues. NOTE ISO 11226, ISO 11228-1, ISO 11228-2, ISO 11228-3, EN 894-3+A1, EN 1005-2, EN 1005-3, EN 1005-4 and EN 1005-5 provide ergonomic requirements and recommendations for manual handling, working postures and safety of machinery.

  • Standard
    59 pages
    English language
    sale 15% off
  • Standard
    59 pages
    English language
    sale 15% off
ISO
ISO 11228-2:2007/Amd 1:2022(Amendment)
Ergonomics — Manual handling — Part 2: Pushing and pulling — Amendment 1
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test. This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment. This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement). Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO/TR 23076:2021(Main)
Ergonomics — Recovery model for cyclical industrial work

This document establishes an ergonomic model for any cyclical human work planned and executed in an industrial competitive environment. It also covers the process of measuring work based on the concept of normal work performance and of the assessment of risk factors commonly associated with body postures, body or hand forces, manual material handling of loads and handling low loads at high frequency. This document applies to the adult working population and is intended to give reasonable protection for nearly all healthy adults. Those areas concerning health risks and control measures are mainly based on experimental studies regarding musculoskeletal loading, discomfort or pain and endurance or fatigue related to work organization and methods. The scope of this document is any cyclical human work planned and executed in an industrial competitive environment. The most typical cases are within industries where there is the need to define an expected output (products or services) based on the optimization of the trade-off between labour productivity and health and safety. The most sensitive organizations to this proposal are those within labour-intensive manufacturing industries with series and batch production systems: — automotive (original equipment manufacturer and tier 1 and 2 suppliers); — industrial automotive (trucks, buses, agricultural and mining equipment); — industrial manufacturing (small domestic and industrial equipment or machinery); — domestic appliances and consumer goods (white goods); — plastic and rubber products (tires, doors, windows, shoes); — consumer electronics (PCs, televisions, printers, radios, hi-fis, alarm systems); — furniture; — textiles and apparel; — food preparation; — packaging; — aerospace and defence; — rail and shipping; — large domestic and industrial equipment or machinery; — logistics.

  • Technical report
    145 pages
    English language
    sale 15% off
ISO
ISO 11228-1:2021(Main)
Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying

This document specifies recommended limits for manual lifting, lowering and carrying while taking into account the intensity, the frequency and the duration of the task. It is designed to provide requirements and recommendations on the assessment of several task variables, allowing the health risks for the working population to be evaluated. This document applies to manual handling of objects with a mass of 3 kg or more and to moderate walking speed, i.e. 0,5 m/s to 1,0 m/s on a horizontal level surface. This document is based on an 8 h working day, but also covers more prolonged working times, up to 12 h. It also addresses the analysis of combined lifting, lowering and carrying tasks in a shift during a day. This document does not cover the holding of objects (without walking), the pushing or pulling of objects or manual handling while seated. The pushing and pulling of objects are covered in the other parts of the ISO 11228 series. This document does not cover handling people or animals. (For further information on handling people, refer to ISO/TR 12296.) This document does not address the manual lifting of objects while using lift-assistive devices such as exoskeletons and does not address the needs of pregnant women or persons with disabilities.

  • Standard
    65 pages
    English language
    sale 15% off
  • Draft
    64 pages
    English language
    sale 15% off