iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TR 7250-4:2023

(Main)

Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists

Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists

This document describes the knowledge and skill required for an experienced anthropometrist who serves as a measurer in anthropometric surveys or a planner of an anthropometric survey. This document also describes methods to quantify the skill of anthropometrists and to report their performance. This document is not a textbook or manual for anthropometry but can be useful for those who plan and conduct anthropometric surveys as well as designers and technologists who utilize anthropometric data. Methods described in this document can also be applicable to measurements other than those described in ISO 7250-1.

Définitions des mesures de base du corps humain pour la conception technologique — Partie 4: Performances attendues des anthropométristes qualifiés

General Information

Status
Published
Publication Date
24-Oct-2023
ICS
13.180 - Ergonomics
Technical Committee
ISO/TC 159/SC 3 - Anthropometry and biomechanics
Drafting Committee
ISO/TC 159/SC 3 - Anthropometry and biomechanics
Current Stage
6060 - International Standard published
Start Date
25-Oct-2023
Due Date
13-Sep-2025
Completion Date
25-Oct-2023
Ref Project

Buy Standard

ISO/TR 7250-4:2023 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:25. 10. 2023ISO/TR 7250-4:2023 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:25. 10. 2023
PreviousNext
Technical report
ISO/TR 7250-4:2023 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:25. 10. 2023
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023
PreviousNext
Draft
ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023REDLINE ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023
PreviousNext
Draft
REDLINE ISO/DTR 7250-4 - Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists Released:5. 07. 2023
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TR
REPORT 7250-4
First edition
2023-10
Basic human body measurements for
technological design —
Part 4:
Expected performance of skilled
anthropometrists
Définitions des mesures de base du corps humain pour la conception
technologique —
Partie 4: Performances attendues des anthropométristes qualifiés
Reference number
ISO/TR 7250-4:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO/TR 7250-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TR 7250-4:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Background . 2
5 Knowledge expected for experienced anthropometrists . 3
5.1 General . 3
5.2 Landmarking and measurement . 3
5.2.1 Basic knowledge on human anatomy . . 3
5.2.2 Correct posture of participant . 3
5.2.3 Landmarking . 3
5.2.4 Instruments and small articles . 3
5.2.5 Role of the assistant. 4
5.2.6 Anthropometric data sheet . 4
5.3 Planning an anthropometric survey . 4
5.3.1 Participants. 4
5.3.2 Measurement items . 5
5.3.3 Measurers and assistants . 5
5.3.4 Space . .
...

FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 7250-4
ISO/TC 159/SC 3
Basic human body measurements for
Secretariat: JISC
technological design —
Voting begins on:
2023-07-19
Part 4:
Voting terminates on:
Expected performance of skilled
2023-09-13
anthropometrists
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 7250-4:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/DTR 7250-4:2023(E)
FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 7250-4
ISO/TC 159/SC 3
Basic human body measurements for
Secretariat: JISC
technological design —
Voting begins on:
Part 4:
Voting terminates on:
Expected performance of skilled
anthropometrists
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 7250-4:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/DTR 7250-4:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Background . 2
5 Knowledge expected for experienced anthropometrists . 3
5.1 General . 3
5.2 Landmarking and measurement . 3
5.2.1 Basic knowledge on human anatomy . . 3
5.2.2 Correct posture of participant . 3
5.2.3 Landmarking . 3
5.2.4 Instruments and small articles .
...

ISO /DTR 7250-4:####(X)
ISO /TC 159/SC 3/WG 1
Date: 2023-04-21
Secretariat: JISC
Date: 2023-07-04
Basic human body measurements for technological design —
Part 4:
Expected performance of skilled anthropometrists

DTRFDIS stage

Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
© ISO #### – All rights reserved

---------------------- Page: 1 ----------------------
ISO #####-#:####(X)
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.


A model manuscript of a draft International Standard (known as “The Rice Model”) is available at
https://www.iso.org/iso/model_document-rice_model.pdf

2 © ISO #### – All rights reserved

---------------------- Page: 2 ----------------------
© ISO 20XX
© ISO #### 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO /DTR 7250-4:####(X:(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
iv © ISO #### 2023 – All rights reserved

---------------------- Page: 4 ----------------------
ISO /DTR 7250-4:####(X:(E)
Contents
Foreword .vi i
Introduction . viii
Part 4: Expected performance of skilled anthropometrists . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Background . 2
5 Knowledge expected for experienced anthropometrists . 3
5.1 General . 3
5.2 Landmarking and measurement . 3
5.2.1 Basic knowledge on human anatomy . 3
5.2.2 Correct posture of participant . 4
5.2.3 Landmarking . 4
5.2.4 Instruments and small articles . 4
5.2.5 Role of the assistant . 4
5.2.6 Anthropometric data sheet . 5
5.3 Planning an anthropometric survey .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 24227:2023(Main)
Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

This document provides a procedure for the standard validation and reporting protocol of walking speed measurements by technological sensor systems compared with the values provided by the reference method, namely walking speed as measured by a tape measure and a stopwatch. It does not address the detailed or specific uses of various technological sensor systems in healthcare.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO 15535:2023(Main)
General requirements for establishing anthropometric databases

This document specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250-1. It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in this document are people who are able to hold the postures specified in ISO 7250-1. NOTE The traditional anthropometry defined in ISO 7250-1 is considered to be a necessary complement to 3-D methods, which are used in some countries. Scanned data are verified according to the definitions given in ISO 7250-1 (see ISO 20685-1). State-of-the-art software allows integration of traditional anthropometric measures with those obtained by 3-D imaging.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 20685-2:2023(Main)
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

This document establishes protocols for testing of 3-D surface-scanning systems in the acquisition of human body shape data and measurements. It does not apply to instruments that measure the motion of individual landmarks. While mainly concerned with whole-body scanners, this document is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners). It applies to body scanners that measure the human body in a single view. When a hand-held scanner is evaluated, the human operator can contribute to the overall error. When systems are evaluated in which the participant is rotated, movement artefacts can be introduced; these can also contribute to the overall error. This document applies to the landmark positions determined by an anthropometrist. It does not apply to landmark positions automatically calculated by software from the point cloud. The quality of surface shape of the human body and landmark positions is influenced by the performance of scanner systems and humans, including measurers and participants. This document addresses the performance of scanner systems by using artefacts rather than human participants as test objects. Traditional instruments are required to be accurate to the millimetre. Their accuracy can be verified by comparing the instrument with a scale calibrated according to an international standard of length. To verify or specify the accuracy of body scanners, a calibrated test object with known form and size is used. The intended audience is those who use 3-D body scanners to create 3-D anthropometric databases, the users of these data, and body scanner designers and manufacturers. This document intends to provide the basis for agreement on the performance of body scanners between scanner users and scanner providers as well as between 3-D anthropometric database providers and data users.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO/TR 7015:2023(Main)
Ergonomics — The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction)

This document is intended to be used alongside ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector. This document (although the examples shown refer only to the civil construction sector) gives information on how existing standards can be used in a global sector, such as construction. Where biomechanical overload is a relevant aspect, albeit with different characteristics, work-related musculoskeletal disorders (WMSDs) are common and specific preventive actions are needed. This document is intended to: 1) define the user(s) and fields for its application (including non-experts in ergonomics); 2) provide examples of procedures for hazard identification, risk estimation or evaluation and risk reduction in different agricultural settings, through: — more synthetic procedural schemes (main test); — more analytical explanations of the procedures, through mathematical models and application examples, and with the use of specific free simple tools in Annexes A, B and C.

  • Technical report
    120 pages
    English language
    sale 15% off
  • Draft
    120 pages
    English language
    sale 15% off
  • Draft
    120 pages
    English language
    sale 15% off
ISO
ISO 24553:2023(Main)
Ergonomics — Accessible design — Ease of operation

This document provides ergonomic requirements and recommendations for increasing accessibility in terms of ease of operation through the design of products and controls of daily use. It is intended to aid the design of products and equipment that can be handled and manipulated easily and comfortably by people with the widest range of physical characteristics, capabilities and limitations across the widest age range. The requirements and recommendations specified in this document are based on general accessibility considerations as well as specific design considerations based on human physical characteristics, capabilities and limitations related to the operation of products and equipment, such as body size, strength, reach range and dexterity. Some considerations of cognitive factors are also presented. Products and equipment for professional use only, as well as those used only by technical experts, are not covered in this document. Design aspects related only to information and marking are not included. This document includes no general ergonomic requirements or recommendations for manual handling, working postures or safety of machinery but the contents are based on general knowledge of those issues. NOTE ISO 11226, ISO 11228-1, ISO 11228-2, ISO 11228-3, EN 894-3+A1, EN 1005-2, EN 1005-3, EN 1005-4 and EN 1005-5 provide ergonomic requirements and recommendations for manual handling, working postures and safety of machinery.

  • Standard
    59 pages
    English language
    sale 15% off
  • Standard
    59 pages
    English language
    sale 15% off
ISO
ISO 11228-2:2007/Amd 1:2022(Amendment)
Ergonomics — Manual handling — Part 2: Pushing and pulling — Amendment 1
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test. This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment. This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement). Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO/TR 23076:2021(Main)
Ergonomics — Recovery model for cyclical industrial work

This document establishes an ergonomic model for any cyclical human work planned and executed in an industrial competitive environment. It also covers the process of measuring work based on the concept of normal work performance and of the assessment of risk factors commonly associated with body postures, body or hand forces, manual material handling of loads and handling low loads at high frequency. This document applies to the adult working population and is intended to give reasonable protection for nearly all healthy adults. Those areas concerning health risks and control measures are mainly based on experimental studies regarding musculoskeletal loading, discomfort or pain and endurance or fatigue related to work organization and methods. The scope of this document is any cyclical human work planned and executed in an industrial competitive environment. The most typical cases are within industries where there is the need to define an expected output (products or services) based on the optimization of the trade-off between labour productivity and health and safety. The most sensitive organizations to this proposal are those within labour-intensive manufacturing industries with series and batch production systems: — automotive (original equipment manufacturer and tier 1 and 2 suppliers); — industrial automotive (trucks, buses, agricultural and mining equipment); — industrial manufacturing (small domestic and industrial equipment or machinery); — domestic appliances and consumer goods (white goods); — plastic and rubber products (tires, doors, windows, shoes); — consumer electronics (PCs, televisions, printers, radios, hi-fis, alarm systems); — furniture; — textiles and apparel; — food preparation; — packaging; — aerospace and defence; — rail and shipping; — large domestic and industrial equipment or machinery; — logistics.

  • Technical report
    145 pages
    English language
    sale 15% off
ISO
ISO 11228-1:2021(Main)
Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying

This document specifies recommended limits for manual lifting, lowering and carrying while taking into account the intensity, the frequency and the duration of the task. It is designed to provide requirements and recommendations on the assessment of several task variables, allowing the health risks for the working population to be evaluated. This document applies to manual handling of objects with a mass of 3 kg or more and to moderate walking speed, i.e. 0,5 m/s to 1,0 m/s on a horizontal level surface. This document is based on an 8 h working day, but also covers more prolonged working times, up to 12 h. It also addresses the analysis of combined lifting, lowering and carrying tasks in a shift during a day. This document does not cover the holding of objects (without walking), the pushing or pulling of objects or manual handling while seated. The pushing and pulling of objects are covered in the other parts of the ISO 11228 series. This document does not cover handling people or animals. (For further information on handling people, refer to ISO/TR 12296.) This document does not address the manual lifting of objects while using lift-assistive devices such as exoskeletons and does not address the needs of pregnant women or persons with disabilities.

  • Standard
    65 pages
    English language
    sale 15% off
  • Draft
    64 pages
    English language
    sale 15% off
ISO
ISO/TR 23476:2021(Main)
Ergonomics — Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector

This document is intended to be used alongside ISO/TR 12295, ISO 11226 and the ISO 11228 series in the agricultural sector. This document gives information on how existing standards can be used in a global sector such as agriculture where, albeit with different characteristics, biomechanical overload is a relevant aspect, WMSDs are common and specific preventive actions are needed. The proposed project aims to: 1) define the user(s) and fields for its application (including non-experts in ergonomics); 2) provide examples of procedures for hazard identification, risk estimation or evaluation and risk reduction in different agricultural settings, through: — more synthetic procedural schemes (main test); — more analytical explanations of the procedures, through mathematical models and application examples, also with the use of specific free simple tools, in: — Annex A (pre-mapping with ERGOCHECK); — Annex B (evaluation of Multitask risk of biomechanical overload on typical agricultural macro-cycles, considering upper limbs repetitive movements, manual lifting and carrying, pushing-pulling); — Annex C (study of awkward postures with criteria derived from the actual standards and scientific literature as TACOS method).

  • Technical report
    133 pages
    English language
    sale 15% off
  • Draft
    145 pages
    English language
    sale 15% off