ISO/IEC 29103:2011

Information technology - Office equipment - Colour photo test pages for measurement of ink cartridge yield for colour photo printing

ISO/IEC 29103:2011 defines a set of test images in a common file format, JPEG, that are used in the testing of cartridge yield for printing of photographs. The defined documents are used in ISO/IEC 29102 to determine the photo yield of cartridges in an inkjet-based printing system.

Technologies de l'information — Équipement de bureau — Pages d'essai pour photographies en couleurs pour le mesurage du rendement des cartouches d'encre pour l'impression de photographies en couleurs

General Information

• Status: Published
• Publication Date: 27-Apr-2011
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: ISO/IEC JTC 1/SC 28 - Office equipment
• Drafting Committee: ISO/IEC JTC 1/SC 28 - Office equipment
• Current Stage: 9093 - International Standard confirmed
• Start Date: 15-Dec-2021
• Completion Date: 30-Oct-2025

Overview

ISO/IEC 29103:2011 is an international standard published by ISO, focusing on information technology and office equipment related to colour photo printing. This standard specifies a set of colour photo test pages in JPEG format, designed for the precise measurement of ink cartridge yield when printing photographs using inkjet-based printing systems. The test images defined in ISO/IEC 29103:2011 are essential for assessing cartridge performance and are utilized within ISO/IEC 29102 for determining the photo yield of ink cartridges.

This standard supports consistent and repeatable testing methods, offering manufacturers, testers, and researchers a unified set of reference materials to evaluate ink consumption and printing efficiency in colour photo printing applications.

Key Topics

• Colour Photo Test Pages: Standardized photographic test images created in JPEG format to facilitate consistent yield measurement.
• Ink Cartridge Yield Measurement: Methods to determine the number of colour photographs produced before an ink cartridge is depleted.
• Inkjet Printing Systems: Focused on inkjet technology commonly used for photo printing in office environments.
• Standardized Testing: Enables cross-comparison of ink cartridge performance across different devices and manufacturers.
• Digital File Format: Utilizes the widely supported JPEG format to ensure broad compatibility and ease of use.

Applications

The ISO/IEC 29103:2011 standard is valuable for a variety of practical applications:

• Printer Manufacturers: To accurately test and report ink cartridge capacities and yields during product development.
• Quality Assurance Labs: Ensuring ink cartridges meet specified yield requirements under controlled conditions.
• Retailers and Consumers: Providing transparency regarding cartridge performance for informed purchasing decisions.
• Research and Development: Assisting in the development of more efficient ink cartridges and printing technologies.
• Standard Conformance Testing: Used as a reference for compliance with related printing standards such as ISO/IEC 29102.

By applying ISO/IEC 29103:2011, stakeholders can guarantee repeatability and reliability in measuring ink usage and photo yield, creating transparency and consistency in the colour printing industry.

Related Standards

• ISO/IEC 29102 – Specifies the method for determining photo yield of ink cartridges, directly using the test pages defined in ISO/IEC 29103.
• ISO/IEC 24712 – General methods for measuring ink cartridge yield in office devices, complementing photo-specific tests.
• ISO 19752 – Defines monochrome toner cartridge yield testing, relevant for black and white printing systems.
• ISO/IEC 24711 – Specifies ink cartridge yield measurement for colour inkjet printers, providing a broader context for yield estimation.

---

Utilizing ISO/IEC 29103:2011 ensures consistent measurement protocols for ink cartridge yield in colour photo printing, enhancing comparability and supporting innovation in inkjet printer technology. This standard is an essential reference for anyone involved in the development, testing, and evaluation of printing consumables in the modern office environment.

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 29103
First edition
2011-05-01
Information technology — Office
equipment — Colour photo test pages for
measurement of ink cartridge yield for
colour photo printing
Technologies de l'information — Équipement de bureau — Pages
d'essai pour photographies en couleurs pour le mesurage du
rendement des cartouches d'encre pour l'impression de photographies
en couleurs
Reference number
©
ISO/IEC 2011
This CD-ROM contains
1) the publication ISO/IEC 29103:2011 in portable document format (PDF), which can be viewed using
Adobe® Acrobat® Reader;
2) the photo yield test pages defined in ISO/IEC 29103:2011.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
IMPORTANT — The electronic file of this document contains colours which are considered to be
useful for the correct understanding of the document. Users should therefore consider printing this
document using a colour printer.
.
©  ISO/IEC 2011
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product
should be addressed to
ISO copyright office  Case postale 56  CH-1211 Geneva 20  Switzerland
Internet [e-mail]
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland
ii © ISO/IEC 2011 – All rights reserved

ISO/IEC
...

INTERNATIONAL ISO/IEC
STANDARD 29103
First edition
2011-05-01
Information technology — Office
equipment — Colour photo test pages for
measurement of ink cartridge yield for
colour photo printing
Technologies de l'information — Équipement de bureau — Pages
d'essai pour photographies en couleurs pour le mesurage du
rendement des cartouches d'encre pour l'impression de photographies
en couleurs
Reference number
©
ISO/IEC 2011
©  ISO/IEC 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2011 – All rights reserved

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 29103 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 28, Office equipment.
© ISO/IEC 2011 – All rights reserved iii

Introduction
The purpose of this International Standard is to define a set of test images in a common file format, JPEG,
that are used in the testing of cartridge yield for printing of photographs. The defined documents are used in
ISO/IEC 29102 to determine the photo yield of cartridges in an inkjet-based printing system.

iv © ISO/IEC 2011 – All rights reserved

INTERNATIONAL STANDARD ISO/IEC 29103:2011(E)

Information technology — Office equipment — Colour photo
test pages for measurement of ink ca
...