ISO 18896:2018

Footwear — Test methods for shanks — Longitudinal stiffness

ISO 18896:2018 specifies a method for assessing the stiffness in the longitudinal direction of steel shanks used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.

Chaussures — Méthodes d'essai pour cambrions — Rigidité longitudinale

L'ISO 18896:2018 spécifie une méthode de contrôle de la rigidité longitudinale des cambrions en acier utilisés pour renforcer la cambrure des chaussures pour femmes et de certaines chaussures pour hommes et pour enfants.

General Information

• Status: Published
• Publication Date: 14-Mar-2018
• ICS: 61.060 - Footwear
• Technical Committee: ISO/TC 216 - Footwear
• Drafting Committee: ISO/TC 216/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 12-Jul-2023

Relations

• Consolidates: ISO/TS 17423:2014 - Intelligent transport systems — Cooperative systems — ITS application requirements and objectives for selection of communication profiles
• Effective Date: 06-Jun-2022
• Revises: ISO 18896:2006 - Footwear — Test methods for shanks — Longitudinal stiffness
• Effective Date: 08-Dec-2012

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18896
Second edition
2018-03
Footwear — Test methods for shanks
— Longitudinal stiffness
Chaussures — Méthodes d'essai pour cambrions — Rigidité
longitudinale
Reference number
ISO 18896:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 18896:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18896:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and materials. 1
5 Sampling and conditioning . 2
6 Test method . 2
7 Expression of results . 3
8 Test report . 3
© ISO 2018 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 18896:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 216, Footwear.
This second edition cancels and replaces the first edition (ISO 18896:2006), which has been technically
revised.
iv © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 18896:2018(E)
Footwear — Test methods for shanks — Longitudinal
stiffness
1 Scope
This document specifies a method for assessing the stiffness in the longitudinal direction of steel shanks
used for the reinforcement of the waist region of women’s shoes and of some men’s and children’s shoes.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendmen
...