ISO 366-5:2006

Textile machinery and accessories - Reeds - Part 5: Dimensions and designation of profile capsules

ISO 366-5:2006 specifies the dimensions and designation of profile capsules for weaving machine reeds. These capsules are used to manufacture plastic-bound metal reeds according to ISO 366-4.

Matériel pour l'industrie textile — Peignes — Partie 5: Dimensions et désignation des profils de capsules

L'ISO 366-5:2006 spécifie les dimensions et la désignation des profils de capsules destinées aux peignes des métiers à tisser. Ces capsules sont utilisées pour la fabrication des peignes métalliques à ligature plastique conformément à l'ISO 366-4:2005.

General Information

• Status: Published
• Publication Date: 29-Mar-2006
• ICS: 59.120.30 - Looms. Weaving machines
• Technical Committee: ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories
• Drafting Committee: ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories
• Current Stage: 9599 - Withdrawal of International Standard
• Start Date: 18-Nov-2024
• Completion Date: 13-Dec-2025

Relations

• Consolidated By: ISO 17249:2013 - Safety footwear with resistance to chain saw cutting
• Effective Date: 06-Jun-2022

Overview

ISO 366-5:2006 is an international standard published by the International Organization for Standardization (ISO) that defines the dimensions and designation of profile capsules used in weaving machine reeds. These profile capsules are essential components in the manufacturing of plastic-bound metal reeds, which are critical parts of textile machinery used in fabric production.

This standard forms part 5 of the ISO 366 series dedicated to textile machinery reeds, complementing other parts that specify dimensions and designations for various types of reeds. ISO 366-5 ensures uniformity and interchangeability of profile capsules across different manufacturers and markets.

Key Topics

• Scope and purpose
  The standard precisely specifies the dimensional specifications for profile capsules that are used to fabricate plastic-bound metal reeds according to ISO 366-4. It covers parameters such as capsule height, thickness, and width.

• Dimensional details
  Profile capsules are characterized by three main measurements:

  • Height (h) in millimeters
  • Thickness (s) in millimeters
  • Width of dent steel (b) in millimeters (when ordered separately from the reed)

• Designation format
  The standard provides a clear designation scheme for profile capsules to facilitate easy identification and specification in procurement and manufacturing processes. For example:
  Profile capsule ISO 366-5 - 18 × 12 × 8, where 18 mm is the height, 12 mm is the thickness, and 8 mm is the width of the dent steel.

• Standardized cross-sections
  The standard includes tables and illustrative figures showing preferred dimensional ranges and profiles, helping manufacturers avoid non-preferred sizes and ensuring compatibility.

Applications

ISO 366-5:2006 is primarily used within the textile manufacturing industry, specifically in the design, production, and maintenance of weaving machinery. Its applications include:

• Reed manufacturing
  Ensures consistent quality and dimensions when producing plastic-bound metal reeds which influence weaving precision and fabric quality.

• Textile machinery assembly and maintenance
  Provides standardized components for textile machine manufacturers and maintenance providers to source correct profile capsules easily.

• Component standardization
  Assists in global supply chain optimization by removing ambiguity related to profile capsule specifications used in reeds.

• Quality assurance
  Supports quality control processes in textile machinery parts production, enhancing machine reliability and reducing downtime.

Related Standards

ISO 366-5:2006 is closely linked to other parts of the ISO 366 series that detail varying reed types and components:

• ISO 366-1: Pitch bound reeds - Dimensions
• ISO 366-2: Metal reeds with plate baulk - Dimensions and designation
• ISO 366-3: Metal reeds with double-spring baulk - Dimensions and designation
• ISO 366-4: Plastic-bound metal reeds - Dimensions and designation

These related standards collectively ensure comprehensive coverage of reeds and their components used in textile machinery, facilitating interoperability and product quality in the global textile industry.

---

By following ISO 366-5, manufacturers and designers of textile weaving reeds can enhance operational efficiency, maintain compliance with international best practices, and improve the durability and performance of weaving machinery components. This standard is crucial for textile machinery suppliers seeking to meet global market requirements for reed profile capsules.

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 366-5
First edition
2006-04-01
Textile machinery and accessories —
Reeds —
Part 5:
Dimensions and designation of profile
capsules
Matériel pour l'industrie textile — Peignes —
Partie 5: Dimensions et désignation des profils de capsules

Reference number
©
ISO 2006
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 366-5 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories,
Subcommittee SC 3, Machinery for fabric
...

NORME ISO
INTERNATIONALE 366-5
Première édition
2006-04-01
Matériel pour l'industrie textile —
Peignes —
Partie 5:
Dimensions et désignation des profils de
capsules
Textile machinery and accessories — Reeds —
Part 5: Dimensions and designation of profile capsules

Numéro de référence
©
ISO 2006
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse
ii © ISO 2006 – Tous droits réservés

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 366-5 a été élaborée par le comité technique ISO/TC 72, Matériel pour l'industrie textile, sous-comité
SC
...