ISO 16100-6:2018
(Main)Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 6: Interface services and protocols for matching profiles based on multiple capability class structures
Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 6: Interface services and protocols for matching profiles based on multiple capability class structures
This document defines the detailed interface services and protocols used in a matching method based on multiple capability class structures. This document also defines a CPTI (Capability Profile Template Interface) Service Group, an Extended CPI (Capability Profile Interface) Service Group and an Extended Matcher Interface Service Group, which is extensions of the Type 1, Type 2 and Type 3 services, respectively, specified in ISO 16100-3:2005,5.4. This document also defines the CCSI (Capability Class Structure Interface) Service Group, an additional service group used to create, register, access and modify a capability class structure for the reference manufacturing domain models specified in ISO 16100-5:2009, Clause 6. This document also specifies detailed contents of the specific part of a capability profile template defined in ISO 16100-5:2009, Clause 7.
Systèmes d'automatisation industrielle et intégration — Profil d'aptitude du logiciel de fabrication pour interopérabilité — Partie 6: Services d'interface et protocoles pour la correspondance des profils fondés sur les structures de classe d'aptitude multiple
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 16100-6
Second edition
2018-09
Industrial automation systems
and integration — Manufacturing
software capability profiling for
interoperability —
Part 6:
Interface services and protocols for
matching profiles based on multiple
capability class structures
Systèmes d'automatisation industrielle et intégration — Profil
d'aptitude du logiciel de fabrication pour interopérabilité —
Partie 6: Services d'interface et protocoles pour la correspondance des
profils fondés sur les structures de classe d'aptitude multiple
Reference number
ISO 16100-6:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 16100-6:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 16100-6:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Service provider interface services . 4
5.1 Service sets . 4
5.2 ESI service set . 5
5.3 Dictionary Import Service Interface . 6
5.3.1 Parts libraries imported to a repository . 6
5.3.2 Relationship between parts libraries and MDDs . 6
5.3.3 Mapping from a PLIB element to an MDD . . 7
6 Extended Service Interface . 7
6.1 CPTI Group services . 7
6.1.1 Scenarios handled by the CPTI Group . 7
6.1.2 Capability profile template creation . 7
6.1.3 The accessTemplate service .10
6.1.4 The modifyTemplate service .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.