ISO 22:1975

Flat transmission belts and corresponding pulleys — Widths

Courroies plates de transmission et poulies correspondantes — Largeurs

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1975
• Withdrawal Date: 30-Apr-1975
• ICS: 21.220.10 - Belt drives and their components
• Technical Committee: ISO/TC 41 - Pulleys and belts (including veebelts)
• Drafting Committee: ISO/TC 41 - Pulleys and belts (including veebelts)
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 12-Dec-1991

Relations

• Revised: SIST ISO 22:1997 - Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
• Effective Date: 12-May-2008
• Revised: ISO 22:1991 - Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
• Effective Date: 15-Apr-2008
• Consolidated By: ISO 11145:1994 - Optics and optical instruments — Lasers and laser-related equipment — Vocabulary and symbols
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL STANDARD 22
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXKnYHAPOnHkR OPrAHM3AUWR IT0 CTAHnAPTH3AUHH .ORGANISATION INTERNATIONALE DE NORMALISATION
Flat transmission belts and corresponding pulleys - Widths
Courroies plates de transmission et poulies correspondantes - Largeurs
First edition - 1975-05-01
Ref. No. IS0 22-1975 (E)
1
UDC 621.851/.852-181
w
-
LD
Ic
Q)
Descriptors : pulleys, belts, power transmission belts, dimensions, width.
c
Price based on 1 page

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 41 has reviewed IS0 Recommendation R 22 and found it
technically suitable for transformation. International Standard IS0 22 therefore
replaces IS0 Recommendation R 22-1956 to which it is technically identical.
IS0 Recommendation R 22 was approved by the Member Bodies of the following
countries :
Austria France Pakistan
Belgium Germany Po
...

NORME INTERNATIONALE 22
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION MEXnYHAF'OAHAR OPrAHH3AUHR no CTAHMPlW3AUHH .ORGANISATION INTERNATIONALE DE NORMALISATION
Courroies plates de transmission et poulies correspondantes -
Largeurs
'<
Fiat transmission belts and corresponding pulleys - Widths
Premiere édition - 1975-05-01
Rbf. no : IS0 22-1975 (FI
CDU 621.851 /.852-181
U
-
Descripteurs : poulie, courroie, courroie de transmission, dimension, largeur.
Prix base sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (ComitBs Membres ISO). L'élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 41 a examiné la Recommandation ISO/R 22 et est d'avis
qu'elle peut, du point de vue technique, être transformée en Norme Internationale.
La présente Norme Internationale remplace donc la Recommandation
ISO/R 22-1956 à laquelle elle est techniquement idendique.
La Recommandation ISO/R 22 avait été approuvée par les Comités Membres des
pays suivants :
Pakistan
Afrique du Sud, Rép. d' Espagne
Al I e magne Finlande Pays-Bas
Aut
...