ISO 8536-15:2022/Amd 1:2023

Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use — Amendment 1

Matériel de perfusion à usage médical — Partie 15: Perfuseurs photoprotecteurs à usage unique — Amendement 1

General Information

• Status: Published
• Publication Date: 28-Feb-2023
• ICS: 11.040.20 - Transfusion, infusion and injection equipment
• Technical Committee: ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
• Drafting Committee: ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
• Current Stage: 6060 - International Standard published
• Start Date: 01-Mar-2023
• Due Date: 16-Nov-2023
• Completion Date: 01-Mar-2023

Relations

• Amends: ISO 8536-15:2022 - Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8536-15
First edition
2022-03
AMENDMENT 1
2023-03
Infusion equipment for medical use —
Part 15:
Light-protective infusion sets for
single use
AMENDMENT 1
Matériel de perfusion à usage médical —
Partie 15: Perfuseurs photoprotecteurs à usage unique
AMENDEMENT 1
Reference number
ISO 8536-15:2022/Amd.1:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

...

NORME ISO
INTERNATIONALE 8536-15
Première édition
2022-03
AMENDEMENT 1
2023-03
Matériel de perfusion à usage
médical —
Partie 15:
Perfuseurs photoprotecteurs à usage
unique
AMENDEMENT 1
Infusion equipment for medical use —
Part 15: Light-protective infusion sets for single use
AMENDMENT 1
Numéro de référence
ISO 8536-15:2022/Amd.1:2023(F)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 8536-15:2022/Amd.1:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023

Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette

publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,

y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut

être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.

ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
© ISO 2023 – Tous droits réservés
---------------------- Page: 2 ----------------------
ISO 8536-15:2022/Amd.1:2023(F)
Avant-propos

L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes

nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est

en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude

a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,

gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.

L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui

concerne la normalisation électrotechnique.

Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont

décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents

critères d'approbation requis pour les différents types de documents ISO. Le présent document a

été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir

www.iso.org/directives).

L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de

droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable

de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant

les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de

l'élaborat
...

2023-01-04
ISO 8536-15:2022-12-20/Amd.1:2023(E)
TC ISO/TC 76
Secretariat: DIN

Infusion equipment for medical use — Part 15: Light-protective infusion sets for single

use — Amendment 1

Matériel de perfusion à usage médical — Partie 15: Perfuseurs photoprotecteurs à usage

unique — Amendement 1
Document type:
Document subtype:
Document stage:
Document language:
---------------------- Page: 1 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or

utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,

or posting on the internet or an intranet, without prior written permission. Permission can be

requested from either ISO at the address below or ISO’s member body in the country of the

requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
[e-mail]
www.iso.org
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such p

...

INTERNATIONAL ISO
STANDARD 8536-15
First edition
2022-03
AMENDMENT 1
Infusion equipment for medical use —
Part 15:
Light-protective infusion sets for
single use
AMENDMENT 1
Matériel de perfusion à usage médical —
Partie 15: Perfuseurs photoprotecteurs à usage unique
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO 8536-15:2022/Amd.1:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8536-15:2022/Amd.1:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rig
...