iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 22040-2:2024

(Main)

Life cycle management of concrete structures — Part 2: Structural planning and design stage

Life cycle management of concrete structures — Part 2: Structural planning and design stage

The proposed document provides the life cycle management of concrete structures particularly focusing on the structural planning and design stage on the basis of the framework and general principles specified by ISO 22040, Life cycle management. This document is applicable to not only newly constructed structures but also existing structures when their life cycle is restarted. This document specifies on how performance requirements should be considered at the planning and design stage and also how the basic LCM scenario should be drawn up. Management items at the design stage are clearly defined and information that may be fed back to the planning stage and be transferred to the execution stage is described.

Gestion du cycle de vie des structures en béton — Partie 2: Etape de conception, définition du schéma structurel et calcul

General Information

Status
Published
Publication Date
01-May-2024
ICS
91.080.40 - Concrete structures
Technical Committee
ISO/TC 71 - Concrete, reinforced concrete and pre-stressed concrete
Drafting Committee
ISO/TC 71 - Concrete, reinforced concrete and pre-stressed concrete
Current Stage
6060 - International Standard published
Start Date
02-May-2024
Due Date
04-Jul-2025
Completion Date
02-May-2024
Ref Project

Buy Standard

ISO 22040-2:2024 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 05. 2024ISO 22040-2:2024 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 05. 2024
PreviousNext
Standard
ISO 22040-2:2024 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 05. 2024
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024
PreviousNext
Draft
ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024REDLINE ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024
PreviousNext
Draft
REDLINE ISO/FDIS 22040-2 - Life cycle management of concrete structures — Part 2: Structural planning and design stage Released:2. 02. 2024
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 22040-2
First edition
Life cycle management of concrete
2024-05
structures —
Part 2:
Structural planning and design stage
Gestion du cycle de vie des structures en béton —
Partie 2: Etape de conception, définition du schéma structurel
et calcul
Reference number
ISO 22040-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 22040-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 22040-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Life cycle management at the structural planning stage . 2
4.1 General .2
4.2 Planning and performance requirements of structures .2
4.3 Basic LCM scenario .3
4.4 Determination of structural concept .4
5 Life cycle management at the structural design stage . 5
5.1 General .5
5.2 Management items .6
5.2.1 Design actions .6
5.2.2 Assumptions and methods in structural analysis .6
5.2.3 Material properties .6
5.2.4 Performance verification .6
5.2.5 Assessment of sustainability indicators .7
5.2.6 Maintenance programme .
...

FINAL DRAFT
International
Standard
ISO/FDIS 22040-2
ISO/TC 71
Life cycle management of concrete
Secretariat: JISC
structures —
Voting begins on:
2024-02-16
Part 2:
Structural planning and design
Voting terminates on:
2024-04-12
stage
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 22040-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 22040-2:2024(en)
International
Standard
ISO/FDIS 22040-2
ISO/TC 71
Life cycle management of concrete
Secretariat: JISC
structures —
Voting begins on:
Part 2:
Structural planning and design
Voting terminates on:
stage
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 22040-2:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 22040-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Life cycle management at the structural planning stage . 2
4.1 General .2
4.2 Planning and performance requirements of structures .2
4.3 Basic LCM scenario .3
4.4 Determination of structural concept .4
5 Life cycle management at the structural design stage . 5
5.1 General .5
5.2 Management items .
...

© ISO 2023 – All rights reserved
ISO/DISFDIS 22040-2: 2023(E)
ISO /TC 71/WG1
Secretariat: JISC
2023-10-10

Date: 2024-02-02
Life cycle management of concrete structures —
Part 2:
Structural planning and design stage
Gestion du cycle de vie des ouvrages en béton — Partie 2: Phase de planification et de conception
structurelles

---------------------- Page: 1 ----------------------
ISO #####-#:####(X)
FDIS stage
2 © ISO #### – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS FDIS 22040-2:2023(E2024(en)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: +41 22 749 09 47
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
© ISO 2023 – All rights reserved iii
© ISO 2024 – All rights reserved

iii

---------------------- Page: 3 ----------------------
ISO/DISFDIS 22040-2:2023(E2024(en)
Contents
Foreword . vi
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Life cycle management at the structural planning stage . 2
4.1 General . 2
4.2 Planning and performance requirements of structures . 2
4.3 Basic LCM scenario . 3
4.4 Determination of structural concept . 4
5 Life cycle management at the structural design stage . 6
5.1 General . 6
5.2 Management items . 7
5.2.1 Design actions . 7
5.2.2 Assumptions and methods in structural analysis . 7
5.2.3 Material properties . 7
5.2.4 Performance verification . 7
5.2.5 Assessment of sustainability indicators . 8
5.2.6 Maintenance programme . 8
5.2.7 Management/demolition program after the end-of-l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 22040:2021(Main)
Life cycle management of concrete structures

This document provides the principles for implementing life cycle management (LCM) of concrete structures throughout the stages of planning, design, execution, use and end-of-life, as well as the framework and procedures for LCM. This document is applicable not only to new structures but also existing structures. It is also applicable to the entire life cycle and each one or more stages composing the life cycle of a structure. NOTE Details in the procedures and specific methodologies for management in each stage of structure's life cycle based on this document is established separately.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 13315-1:2024(Main)
Environmental management for concrete and concrete structures — Part 1: General principles

This document provides a framework and basic rules on environmental management related to concrete and concrete structures. This includes the assessment of the environmental impacts and methods of implementing environmental improvement based on the assessment. This document is used for the environmental consideration in activities related to the production of concrete constituents, the production, recycling and disposal of concrete, and the design, execution, use and demolition of concrete structures. It is applied for their entire lifecycles, respective stages of the lifecycles, or certain ranges of the lifecycles. This document is applicable to newly produced concrete and newly constructed concrete structures, and also existing concrete and concrete structures. This document applies to single concretes, concrete families, single concrete structures, and concrete structure complexes. For materials other than concrete, the related ISO standards are applied where available. In the case where no ISO standard is available, such materials are appropriately dealt with referring to this document and the normative references. This document covers global, regional and local environments. This document does not directly deal with the environmental impacts resulting from the operation of equipment installed in concrete structures. However, the special properties of concrete and concrete structures affecting the operational efficiency of such equipment are considered in this document. This document covers secondary effects of the production of concrete and execution of concrete structures. NOTE The secondary effects of the production of concrete include the future possibility of leaching of heavy metals from concrete or the absorption of heavy metals from the environment, the effect of waste treatments on the environment, etc. This document covers the economic and social effects of environmental consideration in the production of concrete and execution of concrete structures.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 6935-3:2023(Main)
Steel for the reinforcement of concrete — Part 3: Welded fabric

This document specifies technical requirements for factory made sheets or rolls of welded fabric, manufactured from steel wires or bars with diameters from 4 mm to 18 mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of prestressed concrete structures.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 13315-3:2023(Main)
Environmental management for concrete and concrete structures — Part 3: Production of concrete constituents and concrete

This document provides the principles and procedures for environmental management related to production of concrete constituents and concrete. This document covers the following: — concrete constituents: cement, admixtures, additions, aggregate and mixing water; — concrete and precast concrete.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 5091-2:2023(Main)
Structural intervention of existing concrete structures using cementitious materials — Part 2: Top‐surface overlaying

This document specifies the standards for design and construction using the top-surface overlaying method, which increases the thickness of existing concrete members by integrating cementitious materials onto the top surface of the members so as to improve the safety, serviceability, durability and other properties of a concrete structure. This document specifies structural intervention of existing concrete structures using cementitious materials design and execution principles, and strategies for defects and on-going deterioration including, but not limited to: a) mechanical actions, e.g. fatigue, impact, overloading, movement caused by settlement, blast, vibration, and seismic actions; b) chemical and biological actions from environments, e.g. sulfate attack, alkali-aggregate reaction; c) physical actions, e.g. freeze–thaw, thermal cracking, moisture movement, salt crystallization, fire, and erosion; d) reinforcement corrosion; e) original construction defects that remained unaddressed from the time of construction.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 5091-4:2023(Main)
Structural intervention of existing concrete structures using cementitious materials — Part 4: Jacketing

This document specifies the standard requirements regarding design, construction and maintenance to be applied for structural intervention using the jacketing method, which places reinforcing materials such as reinforcing steel or fibre-reinforced polymer (FRP) grids around the periphery of existing concrete column or beam and jackets these members with cementitious materials. This document specifies structural intervention of existing concrete structures using cementitious materials design and execution principles, and strategies for defects and on-going deterioration including, but not limited to: a) mechanical actions, e.g. fatigue, impact, overloading, movement caused by settlement, blast, vibration, and seismic actions; b) chemical and biological actions from environments, e.g. sulfate attack, alkali-aggregate reaction; c) physical actions, e.g. freeze–thaw, thermal cracking, moisture movement, salt crystallization, fire, and erosion; d) reinforcement corrosion; e) original construction defects that remained unaddressed from the time of construction.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 5091-3:2023(Main)
Structural intervention of existing concrete structures using cementitious materials — Part 3: Bottom-surface (soffit) underlaying

This document specifies the standards for design and construction using the bottom-surface (soffit) underlaying method. Bottom-surface (soffit) underlaying is a method whereby reinforcing materials are placed on the bottom surface of the slabs or beams whose performance is lower than required and the improvement of durability, serviceability, safety and other performance of the members is achieved by the integrity between the reinforcing materials and existing members. This document specifies structural intervention of existing concrete structures using cementitious materials design and execution principles, and strategies for defects and on-going deterioration including, but not limited to: a) mechanical actions, e.g. fatigue, impact, overloading, movement caused by settlement, blast, vibration, and seismic actions; b) chemical and biological actions from environments, e.g. sulfate attack, alkali-aggregate reaction; c) physical actions, e.g. freeze–thaw, thermal cracking, moisture movement, salt crystallization, fire, and erosion; d) reinforcement corrosion; e) original construction defects that remained unaddressed from the time of construction.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 5091-1:2023(Main)
Structural intervention of existing concrete structures using cementitious materials — Part 1: General principles

This document specifies the standards for design, construction and maintenance following completion of intervention to be applied for performing intervention work using cementitious materials to improve the performance of existing concrete structures. The intervention dealt with in this document is intended to restore, sustain or improve the mechanical performance of concrete structures. When the intervention is aimed at restoring or improving durability, reference should be made to relevant documents. This document covers the overlaying, underlaying and jacketing methods using cementitious materials. The intervention with cementitious materials is covered in ISO 16311-1, Clause 4.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO/TS 16774-4:2023(Main)
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface

This document specifies a laboratory test method for indirectly measuring the adhesion performance of repair material to wet concrete crack surfaces by qualitatively, as a pass/fail at predetermined time, against predetermined amount of weight exerted on the repair material adhesion. NOTE This document classifies and categorizes materials that are tested into families of similar properties for the purpose of making relative comparisons with the data results.

  • Technical specification
    12 pages
    English language
    sale 15% off
ISO
ISO/TS 16774-3:2023(Main)
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance

This document specifies a laboratory test method on the quantitative determination of repair materials performance and resistance against erosion and wash out due to underground water flow.

  • Technical specification
    8 pages
    English language
    sale 15% off