Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 25: Overhead clearance monitoring

This work item is specialized for safe road transport of freight vehicles by utilizing the 15638 frameworks. Vehicle sensor data and/or roadside sensor data are sent out to service provider. Service provider provides users the vehicle height clearance information for the vehicle. Various data exchange paths are to be defined.

Systèmes de transport intelligents — Cadre pour applications télématiques coopératives pour véhicules réglementés (TARV) — Partie 25: Contrôle du dégagement aérien

General Information

Status

Published

Publication Date

27-Mar-2024

ICS

03.220.20 - Road transport

35.240.60 - IT applications in transport

Technical Committee

ISO/TC 204 - Intelligent transport systems

Drafting Committee

ISO/TC 204 - Intelligent transport systems

Current Stage

6000 - International Standard under publication

Completion Date

29-Feb-2024

Ref Project

Buy Standard

ISO 15638-25:2024 - Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 25: Overhead clearance monitoring
Released:28. 03. 2024

Standard

ISO 15638-25:2024 - Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 25: Overhead clearance monitoring Released:28. 03. 2024

English language

23 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

ISO 15638-25:2024 - Intelligen...

International
Standard
ISO 15638-25
First edition
Intelligent transport systems —
2024-03
Framework for collaborative
telematics applications for
regulated commercial freight
vehicles (TARV) —
Part 25:
Overhead clearance monitoring
Systèmes de transport intelligents — Cadre pour applications
télématiques coopératives pour véhicules réglementés (TARV) —
Partie 25: Contrôle du dégagement aérien
Reference number
ISO 15638-25:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 15638-25:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 15638-25:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 2
5 Conformance . 2
6 General overview and framework . 2
7 Basic conceptual operational requirements . 5
7.1 General .5
7.2 Basic requirement .6
8 Requirements for services using generic vehicle data . 6
8.1 General .6
8.1.1 Introduction .6
8.1.2 Unregulated application services using only generic basic vehicle data .7
8.1.3 Unregulated application services using both generic vehicle data and additional
application-specific data .7
8.2 Conveyance identifiers .7
9 Concept of operations for unregulat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO 24311(Main)

Intelligent transport systems — Mobility integration — 'Controlled zone' management for urban vehicle access restrictions (UVARs) using C-ITS

This document provides information and specifications enabling management of road traffic in controlled zones applying geofencing. Specifically, this document provides — a “Controlled Zone Data Dictionary” (CZDD) for management of controlled zones providing an extendible toolkit that regulators can use e.g. to inform potential CZ users, e.g. vehicles, about — the CZ area, i.e. the geographical boundaries of the CZ; — CZ access conditions including exempts; — time windows indicating when these CZ access conditions are applicable, allowing the potential CZ users to select an appropriate routing, either by pre-trip planning or ad hoc re-routing, — and illustrations and guidelines on how to use this toolkit. The toolkit is designed in compliance with the general ITS station and communications architecture specified in ISO 21217 [8], and optionally applicable C-ITS protocols and procedures, e.g. ISO 22418:2018 [10] on “Service Announcement”, EN ISO 18750 on the “Local Dynamic Map”, and EN ISO 17419 [5] on globally unique identifiers. Enforcement is out of scope of this document.

Standard
22 pages
English language
sale 15% off

ISO

ISO 13141:2024(Main)

Electronic fee collection — Localization augmentation communication for autonomous systems

This document establishes requirements for short-range communication for the purposes of augmenting the localization in autonomous electronic fee collection (EFC) systems. Localization augmentation serves to inform on-board equipment (OBE) about geographical location and the identification of a charge object. This document specifies the provision of location and heading information and security means to protect against the manipulation of the OBE with false RSE. The localization augmentation communication (LAC) takes place between an OBE in a vehicle and fixed RSE. This document is applicable to OBE in an autonomous mode of operation. This document specifies attributes and functions for the purpose of localization augmentation, by making use of the dedicated short-range communications (DSRC) communication services provided by DSRC Layer 7, and makes these LAC attributes and functions available to the LAC applications at the RSE and the OBE. Attributes and functions are specified on the level of application data units (ADUs; see Figure 1). As depicted in Figure 1, this document is applicable to: — the application interface definition between OBE and RSE; — the interface to the DSRC application layer, as specified in ISO 15628 and EN 12834; — the use of the DSRC stack. The LAC is suitable for a range of short-range communication media. This document provides specific definitions regarding the CEN-DSRC stack as specified in EN 15509. Annexes C, D, E and H provide for the use of the Italian DSRC as specified in ETSI/ES 200 674-1, ISO CALM IR ARIB DSRC and WAVE DSRC. This document contains a protocol implementation conformance statement (PICS) proforma in Annex B and transaction examples in Annex F. Annex G highlights how to use this document for the European Electronic Toll Service (EETS). Test specifications are not within the scope of this document.

Standard
36 pages
English language
sale 15% off

ISO

ISO 12813:2024(Main)

Electronic fee collection — Compliance check communication for autonomous systems

This document specifies requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee collecting systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an interrogator [fixed and mobile roadside equipment (RSE) or hand-held unit] and serves to establish whether the data that are delivered by the OBE correctly reflect the road usage of the corresponding vehicle according to the rules of the pertinent toll regime. The operator of the compliance checking interrogator is assumed to be part of the toll charging role as defined in ISO 17573-1. The CCC permits identification of the OBE, vehicle and contract, and verification of whether the driver has fulfilled their obligations and the checking status and performance of the OBE. The CCC reads, but does not write, OBE data. This document is applicable to OBE in an autonomous mode of operation. It is not applicable to compliance checking in dedicated short-range communication (DSRC)-based charging systems. It specifies data syntax and semantics, but not a communication sequence. All the attributes specified herein are required in any OBE claimed to be compliant with this document, even if some values are set to “not specified” in cases where a certain functionality is not present in an OBE. The interrogator is free to choose which attributes are read in the data retrieval phase, as well as the sequence in which they are read. In order to achieve compatibility with existing systems, the communication makes use of the attributes specified in ISO 17573-3 wherever useful. The CCC is suitable for a range of short-range communication media. Specific definitions are given for the CEN-DSRC as specified in EN 15509, as well as for the use of ISO CALM IR, the Italian DSRC as specified in ETSI ES 200 674-1, ARIB DSRC, and WAVE DSRC as alternatives to the CEN-DSRC. The attributes and functions specified are for compliance checking by means of the DSRC communication services provided by DSRC application layer, with the CCC attributes and functions made available to the CCC applications at the RSE and OBE. The attributes and functions are specified on the level of application data units (ADUs). The definition of the CCC includes: — the application interface between OBE and RSE (as depicted in Figure 2); — use of the generic DSRC application layer as specified in ISO 15628 and EN 12834; — CCC data type specifications given in Annex A; — a protocol implementation conformance statement (PICS) proforma is given in Annex B; — use of the CEN-DSRC stack as specified in EN 15509, or other equivalent DSRC stacks as described in Annex C, Annex D, Annex E and Annex F; — security services for mutual authentication of the communication partners and for signing of data (see Annex H); In addition, an example CCC transaction is presented in Annex G and Annex I highlights how to use this document for the European Electronic Toll Service (EETS). Test specifications are not within the scope of this document.

Standard
61 pages
English language
sale 15% off

ISO

ISO 17419:2018/Amd 1:2024(Amendment)

Intelligent transport systems — Cooperative systems — Globally unique identification — Amendment 1: Regions of a closed polygon in a plane

Standard
4 pages
English language
sale 15% off

ISO

ISO 4273:2024(Main)

Intelligent transport systems — Automated braking during low-speed manoeuvring (ABLS) — Requirements and test procedures

This document provides minimum requirements and test procedures for automated braking at velocities below 2,8 m/s (10 km/h) with the specific aim of avoiding or mitigating collisions with pedestrians, other road users (e.g. vehicles) and stationary objects, including infrastructure elements (e.g. walls, pillars). These collisions mainly occur during reversing manoeuvres, but this document also addresses collisions in other directions during low-speed manoeuvring. Automated braking during low-speed manoeuvring (ABLS) requires information about the position and motion of the object, the motion of the subject vehicle, and the driver actions. It then determines if the evaluated situation represents a collision risk. If an imminent collision risk exists, ABLS will automatically activate a brake action to avoid or at least mitigate the collision. The document does not define test objects, but refers to the ISO 19206 series for test objects to be used. The human driver is assumed to perform or at least supervise all driving manoeuvres because the ABLS application is restricted to support only systems of SAE Level 0 – 2. Evasive steering manoeuvres are not within the scope of this document. This document applies to light vehicles only. Vehicles equipped with trailers are not within the scope of this document.

Standard
23 pages
English language
sale 15% off

ISO

ISO 17361:2017/Amd 1:2023(Amendment)

Intelligent transport systems — Lane departure warning systems — Performance requirements and test procedures — Amendment 1

Standard
1 page
English language
sale 15% off

ISO

ISO/TS 23374-2:2023(Main)

Intelligent transport systems — Automated valet parking systems (AVPS) — Part 2: Security integration for type 3 AVP

This document specifies security means and procedures for AVPS Type 3 as specified in ISO 23374-1. It focuses on operation interfaces and management interfaces as defined in ISO 23374-1.

Technical specification
44 pages
English language
sale 15% off

ISO

ISO 17573-3:2023(Main)

Electronic fee collection — System architecture for vehicle-related tolling — Part 3: Data dictionary

This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of semantics are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines: — ASN.1 (data) types within the fields of EFC; — ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC. This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.

Standard
49 pages
English language
sale 15% off

ISO

ISO 23374-1:2023(Main)

Intelligent transport systems — Automated valet parking systems (AVPS) — Part 1: System framework, requirements for automated driving and for communications interface

Automated valet parking systems (AVPSs) perform level 4 automated driving of individual or multiple unoccupied vehicles within a prescribed area of a parking facility. This document specifies performance requirements for the operation functions, the environmental conditions within parking facilities where automated vehicle operation is performed, and the test procedures to verify the performance requirements. An AVPS is comprised of physically separated sub-systems distributed among vehicles, facility equipment and user domains. The functionalities of AVPSs are realized by cooperation of these sub-systems, which are, in many cases, provided by different organizations. This document defines the system architecture and the communication interfaces between the sub-systems at the logical level. An AVPS manages its system participants (i.e. AVPS-compliant vehicles and parking facilities) and provides interfaces to other facility users and involved persons (e.g. system operators, facility managers). This document contains requirements for the management functions such as checking compatibility between vehicles and parking facilities, performing remote assistance and recovery when automated driving cannot be performed, and executing operation stop commands in response to the actions of other facility users. AVPSs are intended for use by a service provider upon receiving authority over vehicles from individual service recipients. This document does not include parking automation technologies that are solely based on usage by an individual user. If the vehicle is put into driverless operation directly by the user, this is not considered to be part of the AVPS.

Standard
153 pages
English language
sale 15% off

ISO

ISO/TS 22726-1:2023(Main)

Intelligent transport systems — Dynamic data and map database specification for connected and automated driving system applications — Part 1: Architecture and logical data model for harmonization of static map data

Technical specification
146 pages
English language
sale 15% off