ISO 13141:2024

Electronic fee collection — Localization augmentation communication for autonomous systems

This document establishes requirements for short-range communication for the purposes of augmenting the localization in autonomous electronic fee collection (EFC) systems. Localization augmentation serves to inform on-board equipment (OBE) about geographical location and the identification of a charge object. This document specifies the provision of location and heading information and security means to protect against the manipulation of the OBE with false RSE. The localization augmentation communication (LAC) takes place between an OBE in a vehicle and fixed RSE. This document is applicable to OBE in an autonomous mode of operation. This document specifies attributes and functions for the purpose of localization augmentation, by making use of the dedicated short-range communications (DSRC) communication services provided by DSRC Layer 7, and makes these LAC attributes and functions available to the LAC applications at the RSE and the OBE. Attributes and functions are specified on the level of application data units (ADUs; see Figure 1). As depicted in Figure 1, this document is applicable to: — the application interface definition between OBE and RSE; — the interface to the DSRC application layer, as specified in ISO 15628 and EN 12834; — the use of the DSRC stack. The LAC is suitable for a range of short-range communication media. This document provides specific definitions regarding the CEN-DSRC stack as specified in EN 15509. Annexes C, D, E and H provide for the use of the Italian DSRC as specified in ETSI/ES 200 674-1, ISO CALM IR ARIB DSRC and WAVE DSRC. This document contains a protocol implementation conformance statement (PICS) proforma in Annex B and transaction examples in Annex F. Annex G highlights how to use this document for the European Electronic Toll Service (EETS). Test specifications are not within the scope of this document.

Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes

ISO 13141:2015 définit les exigences pour une communication à courte portée en vue de mettre en place l'augmentation de localisations dans les systèmes de perception du télépéage (EFC) autonomes. L'augmentation de localisations sert à informer les équipements embarqués (OBE) de leur position géographique et à l'identification d'un objet de facturation. La présente Norme internationale spécifie la mise à disposition des informations de localisation et de direction, et constitue une protection contre la manipulation des équipements embarqués par des équipements routiers (RSE) frauduleux. Les communications d'augmentation de localisations s'effectuent entre l'équipement embarqué sur un véhicule et un équipement routier fixe. La présente Norme internationale s'applique aux équipements embarqués autonomes. Elle définit des attributs et des fonctions pour l'augmentation de localisations au moyen des services de communication DSRC fournis par la couche DSRC 7; elle met ces attributs et ces fonctions LAC à la disposition des applications LAC au niveau des équipements routiers et des équipements embarqués. Les attributs et les fonctions sont définis au niveau des unités de données d'application (ADU, Application Data Unit; voir Figure 1).

General Information

• Status: Published
• Publication Date: 22-Feb-2024
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204 - Intelligent transport systems
• Current Stage: 6060 - International Standard published
• Start Date: 23-Feb-2024
• Due Date: 27-Jan-2025
• Completion Date: 23-Feb-2024

Relations

• Consolidates: ISO 16283-2:2018 - Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
• Effective Date: 06-Jun-2022
• Revises: ISO 13141:2015/Amd 1:2017 - Electronic fee collection — Localisation augmentation communication for autonomous systems — Amendment 1
• Effective Date: 06-Jun-2022
• Revises: ISO 13141:2015 - Electronic fee collection — Localisation augmentation communication for autonomous systems
• Effective Date: 06-Jun-2022

Standards Content (Sample)

International
Standard
ISO 13141
Second edition
Electronic fee collection —
2024-02
Localization augmentation
communication for autonomous
systems
Perception de télépéage — Communications d'augmentation de
localisations pour systèmes autonomes
Reference number
ISO 13141:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13141:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13141:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 3
4 Abbreviated terms . 4
5 Application interface architecture . 5
5.1 General .5
5.2 Services provided.5
5.3 Attributes .6
5.4 Contract and toll context .6
5.5 Use of lower layers .6
5.5.1 Supported DSRC communication stacks .6
5.5.2 The use of the CEN DSRC stack .7
6 Conformance . 7
6.1 Conformance requirements .7
6.2 Conformance statement .7
6.3 Conformance evaluation and testing .
...

INTERNATIONAL ISO
STANDARD 13141
Second edition
Electronic fee collection —
Localization augmentation
communication for autonomous
systems
Perception de télépéage — Communications d'augmentation de
localisations pour systèmes autonomes
PROOF/ÉPREUVE
Reference number
ISO 13141:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 13141:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13141:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 3
4 Abbreviated terms . 4
5 Application interface architecture .5
5.1 General . 5
5.2 Services provided. 5
5.3 Attributes . 6
5.4 Contract and toll context . 6
5.5 Use of lower layers . 6
5.5.1 Supported DSRC communication stacks . 6
5.5.2 The use of the CEN DSRC stack . 7
6 Conformance . 7
6.1 Conformance requirements . 7
6.2 Conformance statement . 7
6.3 Conformance evaluation and testing . 8
7 Functions .
...

Date: 2023-10-02
ISO /PRF 13141:2023(E)
ISO/TC 204/SC /WG 5
Secretariat: ANSI
Date: 2023-11-30
Electronic fee collection — Localization augmentation
communication for autonomous systems
Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes
PROOF

---------------------- Page: 1 ----------------------
ISO /PRF 13141:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
Fehler! Verweisquelle konnte nicht gefunden werden.
ii
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 13141:2023(E)
Contents Page
Foreword . viii
Introduction . x
1 Scope . 1
2 Normative references . 3
3 Terms and definitions . 4
4 Abbreviated terms . 7
5 Application interface architecture . 8
5.1 General . 8
5.2 Services provided . 8
5.3 Attributes . 8
5.4 Contract and toll context . 9
5.5 Use of lower layers . 9
5.5.1 Supported DSRC communication stacks. 9
5.5.2 The use of the CEN DSRC stack . 10
6 Conformance . 10
6.1 Conformance requirements . 10
6.2 Conformance statement . 10
6.3 Conformance evaluation and testing . 10
7 Functions . 10
7.1 General . 10
7.2 Functional requirements .
...