ISO/IEC/IEEE 8802-15-7:2025
(Main)Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-7: Short-range optical wireless communications
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-7: Short-range optical wireless communications
A physical layer (PHY) and medium access control (MAC) sublayer for short-range optical wireless communications (OWC) in optically transparent media using light wavelengths from 10 000 nm to 190 nm are defined. The standard is capable of delivering data rates sufficient to support audio and video multimedia services and also considers mobility of the optical link, compatibility with various light infrastructures, impairments due to noise and interference from sources like ambient light, and a MAC sublayer that accommodates the unique needs of visible links as well as the other targeted light wavelengths. It also accommodates optical communications for cameras where transmitting devices incorporate light-emitting sources and receivers are digital cameras with a lens and image sensor. The standard adheres to applicable eye safety regulations.
Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 15-7: Communications optiques sans fil à courte portée
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO/IEC/IEEE
8802-15-7
First edition
Information technology —
2025-09
Telecommunications and
information exchange between
systems — Local and metropolitan
area networks — Specific
requirements —
Part 15-7:
Short-range optical wireless
communications
Télécommunications et échange entre systèmes informatiques —
Exigences pour les réseaux locaux et métropolitains —
Partie 15-7: Communications optiques sans fil à courte portée
Reference number
© IEEE 2019
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
© IEEE 2019 – All rights reserved
ii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted.
IEEE Standards documents are developed within IEEE Societies and subcommittees of IEEE Standards
Association (IEEE SA) Board of Governors. IEEE develops its standards through an accredited consensus
development process, which brings together volunteers representing varied viewpoints and interests to
achieve the final product. IEEE standards are documents developed by volunteers with scientific, academic,
and industry-based expertise in technical working groups. Volunteers are not necessarily members of IEEE or
IEEE SA and participate without compensation from IEEE. While IEEE administers the process and establishes
rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test,
or verify the accuracy of any of the information or the soundness of any judgments contained in its standards.
ISO and IEC draw attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-15-7 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std 802.15.7-
2018) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE,
by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications
and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2019 – All rights reserved
iii
IEEE Std 802.15.7™-2018
(Revision of
IEEE Std 802.15.7-2011)
IEEE Standard for
Local and metropolitan area networks—
Part 15.7: Short-Range
Optical Wireless Communications
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 5 December 2018
IEEE-SA Standards Board
Abstract: A physical layer (PHY) and medium access control (MAC) sublayer for short-range
optical wireless communications (OWC) in optically transparent media using light wavelengths from
10 000 nm to 190 nm are defined. The standard is capable of delivering data rates sufficient to
support audio and video multimedia services and also considers mobility of the optical link,
compatibility with various light infrastructures, impairments due to noise and interference from
sources like ambient light, and a MAC sublayer that accommodates the unique needs of visible links
as well as the other targeted light wavelengths. It also accommodates optical communications for
cameras where transmitting devices incorporate light-emitting sources and receivers are digital
cameras with a lens and image sensor. The standard adheres to applicable eye safety regulations.
Keywords: IEEE 802.15.7™, laser diode, LD, LED, light-emitting diode, OCC, optical camera
communications, OWC, short-range optical wireless communications, visible light, visible-light
communication, VLC
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 23 April 2019. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-5431-5 STD23483
Print: ISBN 978-1-5044-5432-2 STDPD23483
IEEE prohibits discrimination, harassment and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
Copyright © 2019 IEEE. All rights reserved.
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices
and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at
https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed
within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”)
Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by
the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints
and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and
industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the
Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to
promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against
interference with or from other devices or networks. Implementers and users of IEEE Standards documents are
responsible for determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the
standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-
infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims
any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and
“WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE
standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change
brought about through developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent
professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE
standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered
to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an
individual presenting information on IEEE standards shall make it clear that his or her views should be considered the
personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership
affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that
any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE
and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to
comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE
does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is
welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions
of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of
the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the
publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents
may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made
available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by
reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering
practices and methods. By making these documents available for use and adoption by public authorities and private
users, IEEE does not waive any rights in copyright to the documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive
...
FINAL DRAFT
International
Standard
ISO/IEC/IEEE
FDIS
8802-15-7
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and
Voting begins on:
information exchange between
2025-04-04
systems — Local and metropolitan
Voting terminates on:
area networks — Specific
2025-08-22
requirements —
Part 15-7:
Short-range optical wireless
communications
This document is circulated as received from the committee secretariat.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
FAST TRACK PROCEDURE
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC/IEEE FDIS 8802157:2025(en) © IEEE 2025
FINAL DRAFT
ISO/IEC/IEEE FDIS 8802-15-7:2025(en)
International
Standard
ISO/IEC/IEEE
FDIS
8802-15-7
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and
Voting begins on:
information exchange between
systems — Local and metropolitan
Voting terminates on:
area networks — Specific
requirements —
Part 15-7:
Short-range optical wireless
communications
This document is circulated as received from the committee secretariat.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
© IEEE 2025
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
FAST TRACK PROCEDURE
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland Reference number
ISO/IEC/IEEE FDIS 8802157:2025(en) © IEEE 2025
© IEEE 2025 – All rights reserved
ii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted.
IEEE Standards documents are developed within IEEE Societies and subcommittees of IEEE Standards
Association (IEEE SA) Board of Governors. IEEE develops its standards through an accredited consensus
development process, which brings together volunteers representing varied viewpoints and interests to
achieve the final product. IEEE standards are documents developed by volunteers with scientific, academic,
and industry-based expertise in technical working groups. Volunteers are not necessarily members of IEEE or
IEEE SA and participate without compensation from IEEE. While IEEE administers the process and establishes
rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test,
or verify the accuracy of any of the information or the soundness of any judgments contained in its standards.
ISO and IEC draw attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-15-7 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std 802.15.7-
2018) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE,
by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications
and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2018 – All rights reserved
iii
IEEE Std 802.15.7™-2018
(Revision of
IEEE Std 802.15.7-2011)
IEEE Standard for
Local and metropolitan area networks—
Part 15.7: Short-Range
Optical Wireless Communications
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 5 December 2018
IEEE-SA Standards Board
Abstract: A physical layer (PHY) and medium access control (MAC) sublayer for short-range
optical wireless communications (OWC) in optically transparent media using light wavelengths from
10 000 nm to 190 nm are defined. The standard is capable of delivering data rates sufficient to
support audio and video multimedia services and also considers mobility of the optical link,
compatibility with various light infrastructures, impairments due to noise and interference from
sources like ambient light, and a MAC sublayer that accommodates the unique needs of visible links
as well as the other targeted light wavelengths. It also accommodates optical communications for
cameras where transmitting devices incorporate light-emitting sources and receivers are digital
cameras with a lens and image sensor. The standard adheres to applicable eye safety regulations.
Keywords: IEEE 802.15.7™, laser diode, LD, LED, light-emitting diode, OCC, optical camera
communications, OWC, short-range optical wireless communications, visible light, visible-light
communication, VLC
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 23 April 2019. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-5431-5 STD23483
Print: ISBN 978-1-5044-5432-2 STDPD23483
IEEE prohibits discrimination, harassment and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices
and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at
https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed
within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”)
Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by
the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints
and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and
industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the
Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to
promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against
interference with or from other devices or networks. Implementers and users of IEEE Standards documents are
responsible for determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the
standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-
infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims
any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and
“WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE
standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change
brought about through developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent
professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE
standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered
to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an
individual presenting information on IEEE standards shall make it clear that his or her views should be considered the
personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership
affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that
any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE
and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to
comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE
does not respond to interpretation requests.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.