ISO/IEC/IEEE 8802-A:2015/Amd 3:2025
(Amendment)Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part A: Overview and architecture — Amendment 3: YANG data model for EtherTypes
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part A: Overview and architecture — Amendment 3: YANG data model for EtherTypes
Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie A: Présentation et architecture — Amendement 3
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO/IEC/IEEE
8802-A
First edition
Information technology —
2015-12-15
Telecommunications and
information exchange between
AMENDMENT 3
systems — Local and metropolitan
2025-02
area networks —
Part A:
Overview and architecture
AMENDMENT 3: YANG data model for
EtherTypes
Technologies de l'information — Télécommunications et
échange d'information entre systèmes — Réseaux locaux et
métropolitains —
Partie A: Présentation et architecture
AMENDEMENT 3
Reference number
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
© IEEE 2023
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
© IEEE 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
© IEEE 2023 – All rights reserved
ii
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its
standards.
ISO and IEC draw attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-A:2015/Amd.3 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std
802f-2023) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE,
by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications
and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2023 – All rights reserved
iii
IEEE Std 802f™-2023 ®
(Amendment to IEEE Std 802 -2014
as amended by IEEE Std 802c™-2017 and
IEEE Std 802d™-2017)
IEEE Standard for Local and
Metropolitan Area Networks:
Overview and Architecture
Amendment 3: YANG Data Model for
EtherTypes
Developed by the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 21 September 2023
IEEE SA Standards Board
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
Abstract: The YANG module containing the EtherType information, including a compact human-
readable name and description, for a subset of EtherTypes taken from the IEEE Registration
Authority EtherType public listing is specified in this amendment. This amendment also addresses
errors and omissions in IEEE Std 802 description of existing functionality.
Keywords: BANs, body area networks, EtherTypes, IEEE 802®, IEEE 802f™, IEEE 802
architecture, IEEE 802 reference model, LANs, local area networks, MANs, metropolitan area
networks, object identifiers, PANs, personal area networks, RANs, regional area networks, protocol
development, protocol types, YANG
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 8 December 2023. Printed in the United States of America.
IEEE and IEEE 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical
and Electronics Engineers, Incorporated.
PDF: ISBN 979-8-8557-0279-8 STD26593
Print: ISBN 979-8-8557-0280-4 STDPD26593
IEEE prohibits discrimination, harassment and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/
policies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or
otherwise, without the prior written permission of the publisher.
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers.
These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),
appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning
IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents are developed within IEEE Societies and subcommittees of IEEE Standards
Association (IEEE SA) Board of Governors. IEEE develops its standards through an accredited consensus
development process, which brings together volunteers representing varied viewpoints and interests to
achieve the final product. IEEE standards are documents developed by volunteers with scientific, academic,
and industry-based expertise in technical working groups. Volunteers are not necessarily members of IEEE
or IEEE SA and participate without compensation from IEEE. While IEEE administers the process and
establishes rules to promote fairness in the consensus development process, IEEE does not independently
evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained
in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all
warranties, express or implied, concerning this standard, including but not limited to the warranties of
merchantability, fitness for a particular purpose and non-infringement. IEEE Standards documents do not
guarantee safety, security, health, or environmental protection, or guarantee against interference with or
from other devices or networks. In addition, IEEE does not warrant or represent that the use of the material
contained in its standards is free from patent infringement. IEEE Standards documents are supplied “AS IS”
and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon their
own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate,
seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus balloting process involves the review of documents in English only. In the event that an
IEEE standard is translated, only the English version published by IEEE is the approved IEEE standard.
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter's views should be considered the personal views of that individual rather than
the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group. Statements made
by volunteers may not represent the formal position of their employer(s) or affiliation(s).
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of
interests. For this reason, IEEE and the members of its Societies and subcommittees of the IEEE SA Board
of Governors are not able to provide an instant response to comments, or questions except in those cases
where the matter has previously been addressed. For the same reason, IEEE does not respond to
interpretation requests. Any person who would like to participate in evaluating comments or in revisions to
an IEEE standard is welcome to join the relevant IEEE working group. You can indicate interest in a
working group using the Interests tab in the Manage Profile & Interests area of the IEEE SA myProject
system.
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable regu-
latory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in
compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing.
Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html.
ISO/IEC/IEEE 8802-A:2015/Amd.3:2025(en)
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, neither IEEE nor its licensors waive any rights in copyright
to the documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.