ISO 21076:2016

Space data and information transfer systems — Space communications cross support — Architecture requirements document

ISO 21076:2016 describes SCCS architecture in terms of the following: - definitions of all key elements, on ground and in space, that are involved in space communications; - definitions of concepts that characterize SCCS services; - requirements on system elements and components that provide secure SCCS services; - recommended protocol stack configurations for each element type; and - recommended end-to-end system configurations to provide interoperable and cross-supportable space communications services. ISO 21076:2016 does not specify: - the details of how to implement systems that provide SCCS services; - explicit technologies needed to implement SCCS services; - application or mission operations protocols except for those used for data transfer; - mission operations except for those involved in planning, scheduling, and executing space communications; - spacecraft onboard cross support, except for space communication services. ISO 21076:2016 contains references to other CCSDS technical engineering and architectural recommendations describing how systems doing space communication cross support should be engineered, deployed, organized, and operated to provide interoperable SCCS services. While this document does not specify detailed internal implementation approaches, which are a private matter, it does recommend specific protocols and protocol stacks, service interfaces, element behaviors, and end-to-end architectures. Some of the standards that are referenced in this document, especially those relating to the SSI, are still in development. They are included here so the reader gets a clear understanding of how they fit into an overall architecture. The protocol-related parts of this document make liberal reference to the layers defined in the Open Systems Interconnection (OSI) Basic Reference Model (reference [4]). Subsection 6.2 of the Architecture Description Document (ADD) (reference [D5]) contains a discussion of the OSI stack and the functions associated with each layer. The technical scope of single-hop cross support is the provision of Data Link Layer (Layer 2) data communications services across the Solar System in support of space mission users, using the interoperable infrastructure of one or more space agencies. Services above the Data Link Layer, such as CCSDS File Delivery Protocol (CFDP), Cross-Support File Service (CXFS), or Delta-Differential One-way Range (DOR), may also be provided. All mission operations application in CCSDS-compliant, interoperable, single-hop deployments are expected to utilize these underlying space link and file communications layers. The technical scope of the SSI is the provision of internetworked (Layer 3) data communications services across the Solar System in support of space mission users, using the confederated and interoperable infrastructure of one or more space agencies to achieve a level of service that individual agencies would otherwise be unlikely to achieve. All mission operations application in CCSDS-compliant, interoperable, SSI deployments are expected to utilize these underlying space internetworking communications layers. The temporal scope of this document covers current, single-hop, secure interoperable cross support installations, future deployments of an interoperable and evolving space networking infrastructure, and the transition strategies to evolve from current deployments to a future SSI state. Included in this discussion are mission-driven considerations, such as use of hybrid science/routing missions, as well as identification of optional configurations that are considered acceptable because they are in line with the transition strategies defined in this document. Any agency that wishes to participate as a peer in the SSI should implement interoperable services and interfaces at least up to the Network Layer, along with related support services, as described in this document and specified in the relevant CCSDS and Internet standards. A

Données spatiales et systèmes de transfert d'information - Support croisé des communications spatiales - Exigences d'architecture

General Information

• Status: Published
• Publication Date: 05-Jul-2016
• ICS: 49.140 - Space systems and operations
• Technical Committee: ISO/TC 20/SC 13 - Space data and information transfer systems
• Drafting Committee: ISO/TC 20/SC 13 - Space data and information transfer systems
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 14-Nov-2023

Standards Content (Sample)

DRAFT INTERNATIONAL STANDARD
ISO/DIS 21080
ISO/TC 20/SC 13 Secretariat: ANSI
Voting begins on: Voting terminates on:
2015-12-09 2016-03-09
Space data and information transfer systems — Licklider
transmission protocol (LTP) for CCSDS (based on CCSDS
734.1-B-1)
Titre manque
ICS: 49.140
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 21080:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 1 ----------------------
ISO/DIS 21080:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
CCSDS RECOMMENDED PRACTICE FOR SPACE COMMUNICATIONS CROSS SUPPORT—
ARCHITECTURE REQUIREMENTS DOCUMENT
STATEMENT OF INTENT
The Consultative Committee for Space Data Systems (CCSDS) is an organization officially
established by the management of its members. The Committee meets periodically to address
data systems problems that are common to all participants, and to formulate sound technical
solutions to these problems. Inasmuch as participation in the CCSDS is completely
voluntary, the results of Committee actions are termed Recommendations and are not in
themselves considered binding on any Agency.
CCSDS Recommendations take two forms: Recommended Standards that are prescriptive
and are the formal vehicles by which CCSDS Agencies create the standards that specify how
elements of their space mission support infrastructure shall operate and interoperate with
others; and Recommended Practices that are more descriptive in nature and are intended to
provide general guidance about how to approach a particular problem associated with space
mission support. This Recommended Practice is issued by, and represents the consensus of,
the CCSDS members. Endorsement of this Recommended Practice is entirely voluntary
and does not imply a commitment by any Agency or organization to implement its
recommendations in a prescriptive sense.
No later than five years from its date of issuance, this Recommended Practice will be
reviewed by the CCSDS to determine whether it should: (1) remain in effect without change;
(2) be changed to reflect the impact of new technologies, new requirements, or new
directions; or (3) be retired or canceled.
In those instances when a new version of a Recommended Practice is issued, existing
CCSDS-related member Practices and implementations are not negated or deemed to be non-
CCSDS compatible. It is the responsibility of each member to determine when such Practices
or implementations are to be modified. Each member is, however, strongly encouraged to
direct planning for its new Practices and implementations towards the later version of the
Recommended Practice.
CCSDS 901.1-M-1 Page ii May 2015

---------------------- Page: 3 ----------------------
CCSDS RECOMMENDED PRACTICE FOR SPACE COMMUNICATIONS CROSS SUPPORT—
ARCHITECTURE REQUIREMENTS DOCUMENT
FOREWORD
Through the process of normal evolution, it is expected that expansion, deletion, or
modification of this document may occur. This Recommended Practice is therefore subject
to CCSDS document management and change control procedures, which are defined in the
Organization and Processes for the Consultative Committee for Space Data Systems
(CCSDS A02.1-Y-4). Current versions of CCSDS documents are maintained at the CCSDS
Web site:
http://www.ccsds.org/
Questions relating to the contents or status of this document should be sent to the CCSDS
Secretariat at the e-mail address indicated on page i.
CCSDS 901.1-M-1 Page iii May 2015

---------------------- Page: 4 ----------------------
CCSDS RECOMMENDED PRACTICE FOR SPACE COMMUNICATIONS CROSS SUPPORT—
ARCHITECTURE REQUIREMENTS DOCUMENT
At time of publication, the active Member and Observer Agenci
...

INTERNATIONAL ISO
STANDARD 21076
First edition
2016-07-01
Space data and information transfer
systems — Space communications
cross support — Architecture
requirements document
Données spatiales et systèmes de transfert d’information - Support
croisé des communications spatiales - Exigences d’architecture
Reference number
ISO 21076:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 21076:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 21076:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT)
see the following URL: Foreword - Supplementary information
ISO 21076 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as
CCSDS 901.1-M-1, May 2015) and was adopted (without modifications except those stated in clause
2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles,
Subcommittee SC 13, Space data and information transfer systems.
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 21076:2016(E)
CCSDS RECOMMENDED PRACTICE FOR SPACE COMMUNICATIONS CROSS SUPPORT—
ARCHITECTURE REQUIREMENTS DOCUMENT
STATEMENT OF INTENT
The Consultative Committee for Space Data Systems (CCSDS) is an organization officially
established by the management of its members. The Committee meets periodically to address
data systems problems that are common to all participants, and to formulate sound technical
solutions to these problems. Inasmuch as participation in the CCSDS is completely
voluntary, the results of Committee actions are termed Recommendations and are not in
themselves considered binding on any Agency.
CCSDS Recommendations take two forms: Recommended Standards that are prescriptive
and are the formal vehicles by which CCSDS Agencies create the standards that specify how
elements of their space mission support infrastructure shall operate and interoperate with
others; and Recommended Practices that are more descriptive in nature and are intended to
provide general guidance about how to approach a particular problem associated with space
mission support. This Recommended Practice is issued by, and represents the consensus of,
the CCSDS members. Endorsement of this Recommended Practice is entirely voluntary
and does not imply a commitment by any Agency or organization to implement its
recommendations in a prescriptive sense.
No later than five years from its date of issuance, this Recommended Practice will be
reviewed by the CCSDS to determine whether it should: (1) remain in effect without change;
(2) be changed
...