SIST EN 45510-3-2:2000

Guide for procurement of power station equipment -- Part 3-2: Boilers - Shell boilers

This standard gives guidance on writing the technical specification for the procurement of fired and unfired shell boilers for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers shell boilers: - using solid, liquid or gaseous or derived fuels, waste heat utilisation;...

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 3-2: Kessel - Großwasserraumkessel

Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von Großwasserraumkessel für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen. Dieser Leitfaden bezieht sich auf Großwasserraumkessel: - für feste, flüssige oder gasförmige oder daraus entwickelte Brennstoffe oder Abwärmeverwertung;...

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 3-2: Chaudières - Chaudières à tubes de fumées

La présente norme donne des recommandations pour la rédaction de la spécification technique nécessaire à l'acquisition de chaudières à tubes de fumées avec ou sans combustion pour les centrales de production d'électricité. Ce guide d'achatn'est pas applicable à ce type d'équipement lorsque celui-ci est destiné à l'îlot nucléaire des centrales nucléaires. D'autre applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide. Ce guide couvre les chaudières à tubes de fumées: - utilisant des combustibles solides, liquides, gazeux, ou dérivés, ou de la chaleur de récupération;..

Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers

General Information

• Status: Published
• Publication Date: 31-May-2000
• ICS: 27.060.30 - Boilers and heat exchangers
• ICS: 27.100 - Power stations in general
• Technical Committee: EPT - Steam turbines
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2000
• Due Date: 01-Jun-2000
• Completion Date: 01-Jun-2000
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/BC/CEN/92/10 - Mandate to CEN/CENELEC in the field of electricity generation for the drawing-up of European standards to be used as procurement guides in public contracts and for the preparation of a programme of supporting standards
• Ref Project: EN 45510-3-2:1999 - Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers

Overview

EN 45510-3-2:1999 - Guide for procurement of power station equipment, Part 3-2: Boilers - Shell boilers (CLC) provides guidance for preparing technical specifications when procuring fired and unfired shell boilers for electricity generating stations. The standard focuses on specification content and procurement practice for shell boilers using solid, liquid, gaseous or derived fuels and systems for waste heat utilisation. It is explicitly not applicable to equipment within the nuclear reactor plant area of nuclear power stations.

Key topics

This guide helps specifiers cover the essential elements of a boiler procurement specification without prescribing detailed design values. Important technical topics and requirements typically addressed include:

• Scope and boiler types - definition of fired and unfired shell boilers and intended station application.
• Fuel and combustion - specifying solid, liquid, gaseous or derived fuel handling and combustion interfaces.
• Performance requirements - expected thermal output, efficiencies, and operational modes (e.g., base-load, peaking, waste-heat recovery).
• Design and materials - general guidance on design philosophies, materials selection and corrosion/erosion considerations.
• Testing and inspection - shop testing, site acceptance tests, non‑destructive examination and quality assurance provisions.
• Documentation and drawings - required technical data, operating manuals, maintenance instructions and records for commissioning.
• Transport, installation and commissioning - logistics, lifting/handling requirements, site assembly and handover procedures.
• Safety and compliance - reference to applicable safety, statutory and plant protection requirements (excluding nuclear reactor plant area).
• Warranty and after-sales support - service, spare parts, training and guarantees.

Applications

EN 45510-3-2:1999 is practical for professionals involved in power plant procurement and lifecycle engineering:

• Procurement officers and contract managers drafting tender documents and bidder requirements.
• Plant owners and operators defining performance, testing and documentation obligations.
• Boiler manufacturers and suppliers preparing responses and ensuring contractual compliance.
• Consulting engineers developing technical specifications, bid evaluations and inspection plans.
• Useful when procuring boilers for conventional power stations, industrial power plants and systems that recover waste heat.

Related standards

This Guide complements other parts of the EN 45510 series and broader European/CLC guidance on power station equipment procurement, pressure equipment, testing and quality assurance. When specifying boilers, also refer to relevant national regulations, pressure‑equipment directives and industry codes applicable to the project.

Keywords: EN 45510-3-2:1999, shell boilers, boiler procurement, guide for procurement, power station equipment, fired and unfired boilers, technical specification, waste heat utilisation.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilersLeitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 3-2: Kessel - GroßwasserraumkesselGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 3-2: Chaudières - Chaudières à tubes de fuméesGuide for procurement of power station equipment -- Part 3-2: Boilers - Shell boilers27.100Elektrarne na splošnoPower stations in general27.060.30Grelniki vode in prenosniki toploteBoilers and heat exchangersICS:Ta slovenski standard je istoveten z:EN 45510-3-2:1999SIST EN 45510-3-2:2000en01-junij-2000SIST EN 45510-3-2:2000SLOVENSKI
STAND
...