27.060.30 - Boilers and heat exchangers

This document specifies requirements for the inspection during construction, documentation and marking of shell boilers as defined in EN 12953-1.
NOTE   For other components, such as water tube walls, reference will be made to EN 12952 series.

This document specifies requirements for the inspection during and after construction, documentation and marking of shell boilers as defined in EN 12953-1.
NOTE   For other components, such as water tube walls, reference will be made to the EN 12952 series.

This European Standard is one of a series of European Standards dedicated to air-cooled heat exchangers.
   forced convection air cooled refrigerant condensers as specified in EN 327;
   forced convection unit air coolers for refrigeration as specified in EN 328;
   air cooled liquid coolers "dry coolers" as specified in EN 1048.
This standard provides information for assessing and presenting the acoustic emission characteristics of heat exchangers under stationary operating conditions.
Th...view more

This European Standard is composed of two parts.
The first part supplements EN 303 1, EN 303 2, EN 303 4 and EN 304 hereafter called boiler standards. It specifies the supplementary requirements and tests for the construction, safety, rational use of energy, fitness for purpose, classification and marking related to the domestic hot water operation of oil fired water heaters and combination boilers.
The domestic hot water is produced on either the instantaneous or storage principle. The domest...view more

1.1   General
This document is one of a series dedicated to air-cooled heat exchangers.
-   forced convection air cooled refrigerant condensers as specified in EN 327;
-   forced convection unit air coolers for refrigeration as specified in EN 328;
-   air cooled liquid coolers "dry coolers" as specified in EN 1048.
This document provides information for assessing and presenting the acoustic emission characteristics of heat exchangers under stationary operating conditions.
This document is applica...view more

This document specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable with the exceptions specified in this document.
This document is applicable to the following types of shell-and-tube heat exchanger...view more

This document specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable with the exceptions specified in this document. This document is applicable to the following types of shell-and-tube heat exchangers:...view more

This Part of this European standard applies to shell boilers as defined in prEN 12953-1. This Part of the standard specifies rules for the workmanship and construction of shell boilers.

This European Standard specifies requirements for the workmanship and construction of shell boilers as defined in EN 12953-1.
NOTE 1   For other components such as water tube walls, see the EN 12952 series.
NOTE 2   For economizers and superheaters, see EN 12953-4 or EN 12952-5.

This European Standard specifies, the requirements and test methods concerning, in particular, the construction, safety, fitness for purpose, and rational use of energy, as well as the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as boilers.
Where the word boiler is used, it needs to be read as the boiler including its connecting ducts, ducts and...view more

TC origin: mistake in Formula (4) (SV on 2016-06-10)

TC origin: mistake in Formula (4) (SV on 2016-06-10)

This Part of this European Standard specifies requirements for the design and calculation of pressure parts of shell boilers as defined in EN 12953 1.
NOTE   For other components such as economisers, superheaters, tube walls, headers, reference should be made to EN 12952 series.

This Part of this European Standard specifies requirements for the design and calculation of pressure parts of shell boilers as defined in EN 12953 1.
NOTE   For other components such as economisers, superheaters, tube walls, headers, reference should be made to EN 12952 series.

ISO 18762:2016 specifies requirements for the manufacture of welded tubes made from titanium or titanium alloys, for use in condensers and heat exchangers.

This European Standard applies to water-tube boilers with volumes in excess of 2 l for the generation of steam and/or hot water at an allowable pressure greater than 0,5 bar and with a temperature in excess of 110°C as well as other plant equipment. The purpose of this EN is to ensure that the hazards associated with the operation of water tube boilers are reduced to a minimum and that adequate protection is provided to contain the hazards that still prevail when the water tube boiler is put int...view more

ISO 18665.2015 specifies the general requirements of herbal decoction apparatus with design pressures less than 0,1MPa. It includes both hermetic and non-hermetic decoction apparatus. It is applicable to the herbal decoction apparatus for individual herbal formula prescriptions and for commercial use as well as private use. It also applies to the decocting part of the integrated apparatus of decoction and package.

This European Standard applies to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
The standard covers both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 120 Pa max.
This European Standard provides methods for the determination of the acoustical performance of fan coil units, defining standard working condition and ...view more

This European Standard applies to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
The standard covers both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 120 Pa max.
The standard applies to all types of fan speed control of a fan coil (variable speed, multispeed).
This standard deals with the cooling and heating fu...view more

This European Standard applies to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
The standard covers both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 120 Pa max.
The standard applies to all types of fan speed control of a fan coil unit (variable speed, multispeed).
This standard deals with the cooling and heati...view more