iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61129:1995

(Main)

Alternating current earthing switches - Induced current switching

Alternating current earthing switches - Induced current switching

Applies to alternating current earthing switches, rated 52 kV and above, capable of switching induced currents. Specifies switching requirements for earthing switches used to earth transmission lines.

Wechselstrom-Erdungsschalter - Schalten eingekoppelter Ströme

Sectionneurs de terre à courant alternatif - Etablissement et coupure de courants induits

S'applique aux sectionneurs de terre à courant alternatif, de tension assignée égale ou supérieure à 52 kV, aptes à établir et couper des courants et tensions induits. Etablit des prescriptions pour la manoeuvre en charge des sectionneurs de terre destinés à la mise à la terre des lignes de transport.

Alternating current earthing switches - Induced current switching (IEC 1129:1992)

General Information

Status
Withdrawn
Publication Date
30-Nov-1995
Withdrawal Date
31-Aug-2002
ICS
29.120.40 - Switches
Technical Committee
SKA - Switchgear and control gear
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Ref Project
EN 61129:1994 - Alternating current earthing switches - Induced current switching

Relations

Amended By
SIST EN 61129:1995/A1:2001 - Alternating current earthing switches - Induced current switching
Effective Date
21-Sep-2010
Amended By
SIST EN 61129:1995/A1:2001 - Alternating current earthing switches - Induced current switching
Effective Date
29-Jan-2023
Replaced By
SIST EN 62271-102:2002 - High-voltage switchgear and controlgear -- Part 102: Alternating current disconnectors and earthing switches
Effective Date
28-Jan-2023
Amended By
SIST EN 61129:1995/A1:2001 - Alternating current earthing switches - Induced current switching
Effective Date
07-Jun-2022
Replaced By
SIST EN 62271-102:2002 - High-voltage switchgear and controlgear -- Part 102: Alternating current disconnectors and earthing switches
Effective Date
07-Jun-2022

Buy Standard

EN 61129:1995EN 61129:1995
PreviousNext
Standard
EN 61129:1995
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61129:1995
01-december-1995
Alternating current earthing switches - Induced current switching (IEC 1129:1992)
Alternating current earthing switches - Induced current switching
Wechselstrom-Erdungsschalter - Schalten eingekoppelter Ströme
Sectionneurs de terre à courant alternatif - Etablissement et coupure de courants induits
Ta slovenski standard je istoveten z: EN 61129:1994
ICS:
29.120.40 Stikala Switches
SIST EN 61129:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61129:1995

---------------------- Page: 2 ----------------------

SIST EN 61129:1995

---------------------- Page: 3 ----------------------

SIST EN 61129:1995

---------------------- Page: 4 ----------------------

SIST EN 61129:1995

---------------------- Page: 5 ----------------------

SIST EN 61129:1995

---------------------- Page: 6 ----------------------

SIST EN 61129:1995

---------------------- Page: 7 ----------------------

SIST E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60947-6-2:2023/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020/COR2:2023)
EN IEC 60947-6-2:2023/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2021)
EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/AC:2022(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/COR1:2021)
EN IEC 60947-3:2021/AC:2021-11

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021(Main)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020)
EN IEC 60947-3:2021

This part of IEC 60947 applies to switches, disconnectors, switch-disconnectors and fusecombination
units and their dedicated accessories to be used in distribution circuits and motor
circuits of which the rated voltage does not exceed 1 000 V AC or 1 500 V DC.
NOTE 1 Accessories are interconnecting units, extended terminals, internal coils, auxiliary contacts, motor
operator, etc. offered as options with the basic unit.
This document does not apply to equipment coming within the scope of IEC 60947-2, IEC 60947-4-
1 and IEC 60947-5-1.
Particular requirements for switches, disconnectors, switch-disconnectors and fusecombination
units for use in photovoltaic (PV) DC applications are given in Annex D.
Specific requirements for LV switchgear intended for the connections of aluminium conductors
are given in Annex E.
Guidance on measurement of power loss is provided in Annex F.
This document does not include the additional requirements necessary for electrical
apparatus for explosive gas atmospheres.
NOTE 2 Depending on its design, a switch (or disconnector) can be referred to as "a rotary switch
(disconnector)", "cam-operated switch (disconnector)", "knife-switch (disconnector)", etc.
NOTE 3 In this document, the word "switch" also applies to the apparatus referred to in French as
"commutateurs", intended to modify the connections between several circuits and inter alia to substitute a part of a
circuit for another.
NOTE 4 In general, throughout this document, switches, disconnectors, switch-disconnectors and fusecombination
units will be referred to as "equipment".
The object of this document is to state:
a) the characteristics of the equipment;
b) the conditions that apply to the equipment with reference to:
1) operation and behaviour in normal service;
2) operation and behaviour in case of specified abnormal conditions, e.g. short-circuit;
3) dielectric properties;
c) the tests for confirming that these conditions have been met and the methods that are
adopted for these tests;
d) the information relevant to the marking of the equipment or made available by the
manufacturer, e.g. in the catalogue.
Specific items requiring agreement between the user and the manufacturer are identified in
Annex B.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-1:2018/AC:2020(Corrigendum)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016/COR2:2020)
EN 60947-5-1:2017/AC:2020-05

TAN - // IEC Corrigendum

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 60947-5-1:2022(Main)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
prEN IEC 60947-5-1:2022
  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 62626-1:2023(Main)
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors according to IEC 60947-3 to provide isolation of electrical equipment during repair and maintenance work in specific applications
prEN IEC 62626-1:2023
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-2:2023/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020/COR2:2023)
EN IEC 60947-6-2:2023/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2021)
EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day