Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression (IEC 61300-2-11:2023)

The purpose of this part of IEC 61300 is to ensure that the captivation or the attachment of the
cable to the fibre optic devices or components, for example fibre optic closures, will withstand
compressive axial loads likely to be applied during normal service.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-11: Prüfungen - Axialer Druck (IEC 61300-2-11:2023)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 2-11: Essais - Compression axiale (IEC 61300-2-11:2023)

IEC 61300-2-11:2023 est disponible sous forme de IEC 61300-2-11:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 61300-2-11:2023 vise à vérifier que la rétention ou la fixation du câble à des dispositifs ou des composants fibroniques, par exemple boîtiers fibroniques, résistera aux forces de compression axiale susceptibles d'être appliquées dans des conditions normales de fonctionnement. Cette troisième édition annule et remplace la deuxième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout d’un article "Termes et définitions";
b) suppression du tableau des sévérités pour les boîtiers;
c) ajout d'une recommandation de sévérité pour les tubes et les câbles sans fixation d'éléments de renfort.

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-11. del: Preskusi - Osni pritisk (IEC 61300-2-11:2023)

Namen tega dela standarda IEC 61300 je zagotoviti, da bo trdnost pritrditve kabla na napravo ali komponenta z optičnimi vlakni zdržala tlačno osno obremenitev, ki se lahko pojavi med običajnim delovanjem.

General Information

Status
Published
Public Enquiry End Date
31-Jan-2023
Publication Date
23-Jan-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Jan-2024
Due Date
24-Mar-2024
Completion Date
24-Jan-2024

Relations

Buy Standard

Standard
EN IEC 61300-2-11:2024
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61300-2-11:2024
01-marec-2024
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-11. del: Preskusi - Osni pritisk (IEC 61300-2-11:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-11: Tests - Axial compression (IEC 61300-2-11:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-11: Prüfungen - Axialer Druck (IEC 61300-2-11:2023)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 2-11: Essais - Compression axiale (IEC
61300-2-11:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-2-11:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-2-11:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61300-2-11:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 61300-2-11:2024


EUROPEAN STANDARD EN IEC 61300-2-11

NORME EUROPÉENNE

EUROPÄISCHE NORM January 2024
ICS 33.180.20 Supersedes EN 61300-2-11:2013
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-11: Tests -
Axial compression
(IEC 61300-2-11:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-
mesures - Partie 2-11: Essais - Compression axiale 11: Prüfungen - Axialer Druck
(IEC 61300-2-11:2023) (IEC 61300-2-11:2023)
This European Standard was approved by CENELEC on 2023-12-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61300-2-11:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61300-2-11:2024
EN IEC 61300-2-11:2024 (E)
European foreword
The text of document 86B/4807/FDIS, future edition 3 of IEC 61300-2-11, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-11:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-12-29
document have to be withdrawn

This document supersedes EN 61300-2-11:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-2-11:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61753 (series) NOTE Approved as EN 61753 (series)
IEC 62005 (series) NOTE Approved as EN IEC 62005 (series)
2

-------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.