oSIST prEN ISO 12643-3:2020

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2020)

This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. This part of ISO 12643 shall be used in conjunction with ISO 12643-1. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.

Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik - Teil 3: Ausrüstungen und Systeme in der Buchbinderei und Druckweiterverarbeitung (ISO/DIS 12643-3:2020)

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 3: Systèmes et équipement de reliure et de finissage (ISO/DIS 12643-3:2020)

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 3. del: Oprema in sistemi v knjigoveznici in grafični dodelavi  (ISO/DIS 12643-3:2020)

General Information

• Status: Not Published
• Public Enquiry End Date: 03-May-2020
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: GRT - Graphical technology
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 26-Feb-2020
• Due Date: 15-Jul-2020
• Completion Date: 05-May-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: prEN ISO 12643-3 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2020)

Relations

• Revised: SIST EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
• Effective Date: 19-Jan-2023
• Revised: SIST EN 1010-3:2003+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
• Effective Date: 01-Apr-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 12643-3:2020
01-april-2020
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in
sisteme - 3. del: Oprema v knjigoveznici in grafični dodelavi ter sistemi (ISO/DIS
12643-3:2020)
Graphic technology - Safety requirements for graphic technology equipment and
systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2020)
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der
graphischen Technik - Teil 3: Ausrüstungen und Systeme in der Buchbinderei und
Druckweiterverarbeitung (ISO/DIS 12643-3:2020)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 3: Systèmes et équipement de reliure et de finissage
(ISO/DIS 12643-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 12643-3
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
oSIST prEN ISO 12643-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12643-3:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12643-3:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12643-3
ISO/TC 130 Secretariat: SAC
Voting begins on: Voting terminates on:
2020-02-11 2020-05-05
Graphic technology — Safety requirements for graphic
technology equipment and systems —
Part 3:
Binding and finishing equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie
graphique —
Partie 3: Systèmes et équipement de reliure et de finissage
ICS: 37.100.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12643-3:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12643-3:2020
ISO/DIS 12643-3:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12643-3:2020
ISO/DIS 12643-3:2020(E)

Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Significant hazards . 4
5 Guarding of significant hazards . 5
5.1
...