SIST EN IEC 61300-2-5:2022/A1:2025
(Amendment)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-5: Prüfungen - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Dispositifs d’interconnexion et composants passifs fibroniques - Procédures fondamentales d’essais et de mesures - Partie 2-5: Essais - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-5. del: Preskusi - Torzija - Dopolnilo A1 (IEC 61300-2-5:2022/AMD1:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2025
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-5. del: Preskusi - Torzija - Dopolnilo A1 (IEC 61300-2-
5:2022/AMD1:2025)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-5: Prüfungen - Torsion (IEC 61300-2-5:2022/AMD1:2025)
Dispositifs d’interconnexion et composants passifs fibroniques - Procédures
fondamentales d’essais et de mesures - Partie 2-5: Essais - Torsion (IEC 61300-2-
5:2022/AMD1:2025)
Ta slovenski standard je istoveten z: EN IEC 61300-2-5:2022/A1:2025
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61300-2-5:2022/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2025
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-5: Tests -
Torsion
(IEC 61300-2-5:2022/AMD1:2025)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-
mesures - Partie 2-5 : Essais - Torsion 5: Prüfungen - Torsion
(IEC 61300-2-5:2022/AMD1:2025) (IEC 61300-2-5:2022/AMD1:2025)
This amendment A1 modifies the European Standard EN IEC 61300-2-5:2022; it was approved by CENELEC on 2025-08-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-2-5:2022/A1:2025 E
European foreword
The text of document 86B/5073/FDIS, future edition 4 of IEC 61300-2-5/AMD1, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-
5:2022/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-09-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-09-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-2-5:2022/AMD1:2025 was approved by CENELEC
as a European Standard without any modification.
IEC 61300-2-5 ®
Edition 4.0 2025-07
INTERNATIONAL
STANDARD
AMENDMENT 1
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
ICS 33.180.20 ISBN 978-2-8327-0606-0
IEC 61300-2-5:2022-09/AMD1:2025-07(en)
IEC 61300-2-5:2022/AMD1:2025 © IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-5: Tests - Torsion
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.