SIST ETS 300 607-1 E12:2005
(Main)Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.25.1)
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.25.1)
SUBJECT CR for Clarification on 34.2.1 TC testing of TC1M CR to section 32.11.x Intra cell channel change from TCH/HS to a TCH/FS CR to section 26.1.2.2.1 EFR signalling/Handover/active call/successful case CR to section 14.7 blocking and spurious response CR on UA frame with different information field CR to section 32.12.x Intra cell channel change from TCH/FS to a TCH/HS CR to section 26.11.2.2.3.3 Multiband BCCH / Intercell Handover CR to section 34.3.3 Correction of the content of the Cell Broadcast message CR to section 26.6.3.6 Measurement reporting 20s requirement in multi band environment CR to section 26.6.15 DCS HO Tests, NCD to include missing BCCH ARFCH CR for removal of checks on Classmark 1,2,3 in the PIXIT statements CR to section 26.6.3.2 Measurement reporting 20s requirement in single band environment
Digitalni celični telekomunikacijski sistem (faza 2) - Specifikacija skladnosti mobilne postaje (MS) - 1. del: Specifikacija skladnosti (GSM 11.10-1, različica 4.25.1)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ETS 300 607-1 E12:2005
01-februar-2005
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D6SHFLILNDFLMDVNODGQRVWL
PRELOQHSRVWDMH06GHO6SHFLILNDFLMDVNODGQRVWL*60UD]OLþLFD
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS)
conformance specification; Part 1: Conformance specification (GSM 11.10-1 version
4.25.1)
Ta slovenski standard je istoveten z: ETS 300 607-1 Edition 12
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST ETS 300 607-1 E12:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 607-1 E12:2005
---------------------- Page: 2 ----------------------
SIST ETS 300 607-1 E12:2005
EUROPEAN ETS 300 607-1
TELECOMMUNICATION August 1999
STANDARD Twelfth Edition
Source: SMG Reference: RE/SMG-071110PRA-1
ICS: 33.020
Key words: Digital cellular telecommunications system, Global System for Mobile Communication (GSM)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
Digital cellular telecommunications system (Phase 2);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification
(GSM 11.10-1 version 4.25.1)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: secretariat@etsi.fr - http://www.etsi.org
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1999. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 607-1 E12:2005
Page 2
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Standards Making Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 607-1 E12:2005
Page 3
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
Contents
Foreword .29
1 Scope .31
2 Normative references.31
3 Definitions, conventions, and applicability.37
3.1 Mobile station definition and configurations.37
3.2 Applicability .37
3.2.1 Applicability of this specification .37
3.2.2 Applicability of the individual tests .38
3.2.3 Applicability to terminal equipment.57
3.3 Definitions .58
3.4 Conventions for mathematical notations.58
3.4.1 Mathematical signs.58
3.4.2 Powers to the base 10.58
3.5 Conventions on electrical terms.58
3.5.1 Radio Frequency (RF) input signal level .58
3.5.2 Reference sensitivity level.59
3.5.3 Power level of fading signal.59
3.6 Terms on test conditions.59
3.6.1 Radio test conditions .59
4 Test Equipment .60
4.1 Terms used to describe test equipment in this ETS.60
4.2 Functional requirements of test equipment.60
5 Testing methodology in general (layers 1, 2, and 3) .61
5.1 Testing of optional functions and procedures.61
5.2 Test interfaces and facilities .61
5.3 Different protocol layers.61
5.4 Information to be provided by the apparatus supplier.61
5.5 Definitions of transmit and receive times.62
6 Reference test methods.62
6.1 General .62
6.2 Choice of frequencies in the frequency hopping mode.62
6.3 "Ideal" radio conditions .62
6.4 Standard test signals. .63
6.5 Power (control) levels. .63
7 Implicit testing.63
8 Measurement uncertainty.63
9 Format of tests .63
10 Generic call set up procedures .64
10.1 Generic call set-up procedure for mobile terminating speech calls.64
10.2 Generic call set-up procedure for mobile originating speech calls .69
10.3 Generic call set-up procedure for mobile terminating data calls.72
10.4 Generic call set-up procedure for mobile originating data calls.75
11 General tests.79
11.1 Verification of support and non-support of services (multiple numbering scheme or
ISDN) .79
11.1.1 Mobile Terminated (MT) calls.79
11.1.2 Mobile Originated (MO) calls.80
11.2 Verification of support of the single numbering scheme.81
---------------------- Page: 5 ----------------------
SIST ETS 300 607-1 E12:2005
Page 4
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
11.3 Verification of non-support of services (Advice of Charge Charging (AoCC)) . 82
11.4 Verification of non-support of services (call hold) . 83
11.5 Verification of non-support of services (multiparty). 84
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)) . 85
11.7 IMEI Security . 86
11.8 Coding of the Bearer Capability information element. 87
11.8.1 Network to MS Direction. 88
11.8.1.1 BS 21 to 26 - Asynchronous Service . 88
11.8.1.1.1 BS 21. 88
11.8.1.1.2 BS 22. 92
11.8.1.1.3 BS 24. 92
11.8.1.1.4 BS 25. 92
11.8.1.1.5 BS 26. 92
11.8.1.1.6 BS 23. 92
11.8.1.2 BS 31 to 34 - Synchronous Service . 93
11.8.1.2.1 BS 32. 93
11.8.1.2.2 BS 31. 97
11.8.1.2.3 BS 33. 98
11.8.1.2.4 BS 34. 98
11.8.1.3 BS 61 - Alternate Speech / Data. 98
11.8.1.3.1 Speech/Asynchronous Data,
Transparent. 99
11.8.1.3.2 Speech/Asynchronous Data, Non
Transparent. 101
11.8.1.3.3 Speech/Synchronous Data. 103
11.8.1.4 BS 81 - Speech followed by Data . 104
11.8.1.4.1 Speech followed by Asynchronous
Data. 104
11.8.1.4.2 Speech followed by Synchronous
Data. 104
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3 . 104
11.8.1.5.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent. 105
11.8.1.5.2 TS 61 - Alternate Speech / Facsimile
group 3, Non-Transparent. 106
11.8.1.6 TS 62 - Automatic Facsimile group 3. 107
11.8.2 MS to SS direction . 107
11.8.2.1 BS 21 to 26 - Asynchronous Service . 107
11.8.2.1.1 BS 21. 108
11.8.2.1.2 BS 22. 112
11.8.2.1.3 BS 24. 112
11.8.2.1.4 BS 25. 112
11.8.2.1.5 BS 26. 112
11.8.2.1.6 BS 23. 112
11.8.2.2 BS 31 to 34 - Synchronous Service . 113
11.8.2.2.1 BS 32. 113
11.8.2.2.2 BS 31. 117
11.8.2.2.3 BS 33. 118
11.8.2.2.4 BS 34. 118
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous . 119
2)
11.8.2.3.1 BS 41 . 119
11.8.2.3.2 BS 42. 120
11.8.2.3.3 BS 44. 121
11.8.2.3.4 BS 45. 121
11.8.2.3.5 BS 46. 121
11.8.2.3.6 BS 43. 121
11.8.2.4 BS 51 to 53 - Packet Service Synchronous . 122
2)
11.8.2.4.1 BS 51 . 122
11.8.2.4.2 BS 52. 122
11.8.2.4.3 BS 53. 122
11.8.2.5 BS 61 - Alternate Speech / Data. 123
11.8.2.5.1 Speech/Asynchronous Data,
Transparent. 123
---------------------- Page: 6 ----------------------
SIST ETS 300 607-1 E12:2005
Page 5
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
11.8.2.5.2 Speech/Asynchronous Data, Non
Transparent .125
11.8.2.5.3 Speech/Synchronous Data .127
11.8.2.6 BS 81 - Speech followed by Data .128
11.8.2.6.1 Speech followed by Asynchronous
Data .128
11.8.2.6.2 Speech followed by Synchronous
Data .128
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3.128
11.8.2.7.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent .129
11.8.2.7.2 TS 61 - Alternate Speech / Facsimile
group 3, Non Transparent.130
11.8.2.8 TS 62 - Automatic Facsimile group 3 .131
11.8.2.9 TS 11 and TS 12- Speech .131
11.8.2.9.1 Support of only full/half rate speech
version 1 .131
11.8.2.9.2 Support of speech full rate version 2
(Enhanced Full Rate).131
12 Transceiver.133
12.1 Conducted spurious emissions.133
12.1.1 MS allocated a channel .133
12.1.2 MS in idle mode.134
12.2 Radiated spurious emissions.136
12.2.1 MS allocated a channel .136
12.2.2 MS in idle mode.138
13 Transmitter .141
13.1 Frequency error and phase error.141
13.2 Frequency error under multipath and interference conditions .144
13.3 Transmitter output power and burst timing .146
13.4 Output RF spectrum .153
13.5 Intermodulation attenuation .159
14 Receiver .161
14.1 Bad frame indication .167
14.1.1 Bad frame indication - TCH/FS .167
14.1.1.1 Bad frame indication - TCH/FS - Random RF input .167
14.1.1.2 Bad frame indication - TCH/FS - Frequency hopping and
downlink DTX .168
14.1.2 Bad frame indication - TCH/HS.169
14.1.2.1 Bad frame indication - TCH/HS - Random RF input.169
14.1.2.2 Bad frame indication - TCH/HS - Frequency hopping and
downlink DTX .170
14.1.3 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.171
14.1.4 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.173
14.2 Reference sensitivity.176
14.2.1 Reference sensitivity - TCH/FS.176
14.2.2 Reference sensitivity - TCH/HS (Speech frames).178
14.2.3 Reference sensitivity - FACCH/F .181
14.2.4 Reference sensitivity - FACCH/H .182
14.2.5 Reference sensitivity - full rate data channels.183
14.2.6 Reference sensitivity - half rate data channels.184
14.2.7 Reference sensitivity - TCH/EFS.185
14.3 Usable receiver input level range.187
14.4 Co-channel rejection.188
14.4.1 Co-channel rejection - TCH/FS. .188
14.4.2 Co-channel rejection - TCH/HS.190
14.4.3 Co-channel rejection - TCH/HS (SID frames) .192
14.4.4 Co-channel rejection - FACCH/F.194
---------------------- Page: 7 ----------------------
SIST ETS 300 607-1 E12:2005
Page 6
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
14.4.5 Co-channel rejection - FACCH/H. 195
14.4.6 Co-channel rejection - TCH/EFS. . 196
14.5 Adjacent channel rejection . 197
14.5.1 Adjacent channel rejection - speech channels . 197
14.5.2 Adjacent channel rejection - control channels . 200
14.6 Intermodulation rejection. 202
14.6.1 Intermodulation rejection - speech channels . 202
14.6.2 Intermodulation rejection - control channels. 204
14.7 Blocking and spurious response . 205
14.7.1 Blocking and spurious response - speech channels . 205
14.7.2 Blocking and spurious response - control channels . 208
14.8 AM suppression. 212
14.8.1 AM suppression - speech channels. 212
14.8.2 AM suppression - control channels. 213
14.9 Paging performance at high input levels . 215
15 Timing advance and absolute delay . 216
16 Reception time tracking speed . 218
17 Access times during handover . 220
17.1 Intra cell channel change . 220
17.2 Inter cell handover. 222
18 Temporary reception gaps. 225
19 Channel release after unrecoverable errors . 227
19.1 Channel release after unrecoverable errors -1 . 227
19.2 Channel release after unrecoverable errors - 2 . 228
19.3 Channel release after unrecoverable errors - 3 . 229
20 Cell selection and reselection. 231
20.1 Cell selection. 232
20.2 Cell selection with varying signal strength values . 234
20.3 Basic cell reselection. 236
20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET,
POWER_OFFSET and PENALTY_TIME parameters. 238
20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type
2ter, type 7 and type 8 messages. . 240
20.6 Cell reselection timings . 242
20.7 Priority of cells . 244
20.8 Cell reselection when C1 (serving cell) < 0 for 5 seconds . 245
20.9 Running average of the surrounding cell BCCH carrier signal levels . 246
20.10 Running average of the serving cell BCCH carrier signal level. 247
20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH
information of a new carrier on the list . 249
20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest
neighbour carriers . 250
20.13 Decoding the BSIC of the neighbour carriers on the list of six strongest neighbour
carriers . 251
20.14 Emergency calls. 252
20.15 Cell reselection due to MS rejection "LA not allowed". 253
20.16 Downlink signalling failure. 255
20.17 Cell selection if no suitable cell found in 10 s. 256
20.18 Cell reselection due to MS rejection "Roaming not allowed in this LA". 257
20.19 Cell selection on release of SDCCH and TCH. 258
20.20 Multiband cell selection and reselection. 260
20.20.1 Multiband cell selection and reselection / Cell Selection . 260
20.20.2 Multiband cell selection and reselection / Cell reselection. 262
21 Received signal measurements . 264
21.1 Signal strength . 264
21.2 Signal strength selectivity. 267
---------------------- Page: 8 ----------------------
SIST ETS 300 607-1 E12:2005
Page 7
ETS 300 607-1 (GSM 11.10-1 version 4.25.1): August 1999
21.3 Signal quality under static conditions.268
21.3.1 Signal quality under static conditions - TCH/FS .268
21.3.2 Signal quality under static conditions - TCH/HS.270
21.4 Signal quality under TU50 propagation conditions .272
22 Transmit power control timing and confirmation .275
23 Single frequency reference .276
24 Tests of the layer 1 signalling functions .277
25 Tests of the layer 2 signalling functions .278
25.1 Introduction, objective and scope .278
25.1.1 General.278
25.1.2 Test configurations.278
25.1.3 Pre-conditions .278
25.1.4 Layer 2 test frames.279
25.1.5 Establishment of the dedicated physical resource .279
25.1.6 Release of the dedicated physical resource.280
25.2 Test sequences .280
25.2.1 Initialization.281
25.2.1.1 Initialization when contention resolution required .281
25.2.1.1.1 Normal initialization.281
25.2.1.1.2 Initialization failure .282
25.2.1.1.2.1 Loss of UA frame.282
25.2.1.1.2.2 UA frame with different information
field .283
25.2.1.1.2.3 Information frame and supervisory
frames in response to an SABM frame284
25.2.1.1.3 Initialization denial.285
25.2.1.1.4 Total initialization failure.286
25.2.1.2 Initialization, contention resolution not required.287
25.2.1.2.1 Normal initialization without contention
resolution .287
25.2.1.2.2 Initialization failure .288
25.2.1.2.3 Initialization denial.289
25.2.1.2.4 Total initialization failure.290
25.2.2 Normal information transfer.291
25.2.2.1 Sequence counting and I frame acknowledgements.291
25.2.2.2 Receipt of an I frame in the timer recovery state.294
25.2.2.3 Segmentation and concatenation .296
25.2.3 Normal layer 2 disconnection .299
25.2.4 Test of link failure .299
25.2.4.1 I frame loss (MS to SS) .299
25.2.4.2 RR response frame loss (SS to MS) .301
25.2.4.3 RR response frame loss (MS to SS) .301
25.2.5 Test of frame transmission with incorrect C/R values.302
25.2.5.1 I frame with C bit set to zero.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.