SIST EN ISO 21183-1:2007
(Main)Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005)
Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005)
Will describe the principal characteristics and applications of light conveyor belts to enable the validity of certain standards to be limited to light conveyor belts or to enable light conveyor belts to be excluded from the scope of certain standards.
Leichte Fördergurte - Teil 1: Grundeigenschaften und Anwendungen (ISO 21183-1:2005)
Dieser Teil der ISO 21183 beschreibt die wesentlichen Eigenschaften und Anwendungen leichter Fördergurte. Diese Beschreibung ist notwendig, entweder um
Diese Europäische Norm beschreibt die Grundeigenschaften und Anwendungen von leichten Fördergurten. Diese Beschreibung ist einerseits notwendig, um den Anwendungs¬bereich von Normen auf leichte Fördergurte zu beschränken, und andererseits, um leichte Fördergurte vom Anwendungsbereich anderer Normen auszuschließen.
Courroies transporteuses légeres - Partie 1: Caractéristiques et applications principales (ISO 21183-1:2005)
L'ISO 21183-1:2005 décrit les caractéristiques et applications principales des courroies transporteuses légères. Cette description est nécessaire pour limiter, d'une part l'application des normes aux courroies transporteuses légères, d'autre part pour exclure les courroies transporteuses légères des autres normes.
Naprave za kontinuirni transport – Lahki trakovi tračnih transporterjev – 1. del: Osnovne značilnosti in uporabnost (ISO 21183-1:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 21183-1:2007
01-april-2007
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW±/DKNLWUDNRYLWUDþQLKWUDQVSRUWHUMHY±GHO
2VQRYQH]QDþLOQRVWLLQXSRUDEQRVW ,62
Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-
1:2005)
Leichte Fördergurte - Teil 1: Grundeigenschaften und Anwendungen (ISO 21183-1:2005)
Courroies transporteuses légeres - Partie 1: Caractéristiques et applications principales
(ISO 21183-1:2005)
Ta slovenski standard je istoveten z: EN ISO 21183-1:2006
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 21183-1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 21183-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 53.040.20 Supersedes EN 873:1996
English Version
Light conveyor belts - Part 1: Principal characteristics and
applications (ISO 21183-1:2005)
Courroies transporteuses légères - Partie 1: Leichte Fördergurte - Teil 1: Grundeigenschaften und
Caractéristiques et applications principales (ISO 21183- Anwendungen (ISO 21183-1:2005)
1:2005)
This European Standard was approved by CEN on 21 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21183-1:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 21183-1:2006 (E)
Foreword
The text of ISO 21183-1:2005 has been prepared by Technical Committee ISO/TC 41 "Pulleys and belts
(including veebelts)” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 21183-1:2006 by Technical Committee CEN/TC 188 "Conveyor belts", the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the
latest by May 2007.
This document supersedes EN 873:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
Endorsement notice
The text of ISO 21183-1:2005 has been approved by CEN as EN ISO 21183-1:2006 without any modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 21183-1
First edition
2005-11-01
Light conveyor belts —
Part 1:
Principal characteristics and applications
Courroies transporteuses légères —
Partie 1: Caractéristiques et applications principales
Reference number
ISO 21183-1:2005(E)
©
ISO 2005
---------------------- Page: 4 ----------------------
ISO 21183-1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 21183-1:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
Internation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.