Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO/DIS 16834:2024)

ISO 16834:2012 specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high-strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases.
ISO 16834:2012 is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.

Schweißzusätze - Drahtelektroden, Drähte, Stäbe und Schweißgut zum Schutzgasschweißen von hochfesten Stählen - Einteilung (ISO/DIS 16834:2024)

Produits consommables pour le soudage - Fils-électrodes, fils, baguettes et dépôts pour le soudage à l'arc sous flux gazeux des aciers à haute résistance - Classification (ISO/DIS 16834:2024)

L'ISO 16834:2012 spécifie les exigences relatives à la classification des fils-électrodes, des fils, des baguettes et du métal fondu à l'état brut de soudage ou après traitement thermique après soudage (PWHT) pour le soudage à l'arc sous protection gazeuse et le soudage TIG des aciers à haute résistance ayant une limite d'élasticité minimale supérieure à 500 MPa, ou une limite de résistance à la traction de 570 MPa. Un fil-électrode peut être soumis aux essais et classifié en utilisant différents gaz de protection.
L'ISO 16834:2012 propose une spécification mixte permettant une classification utilisant soit un système basé sur la limite d'élasticité et l'énergie de rupture moyenne de 47 J pour le métal fondu hors dilution, soit un système basé sur la résistance à la traction et l'énergie de rupture moyenne de 27 J pour le métal fondu hors dilution.

Dodajni in pomožni materiali za varjenje - Žične elektrode, žice, palice in čisti vari za obločno varjenje visokotrdnostnih jekel v zaščitnemi plinu - Razvrstitev (ISO/DIS 16834:2024)

General Information

Status
Not Published
Public Enquiry End Date
02-May-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Mar-2024
Due Date
24-Jul-2024
Completion Date
14-May-2024

Relations

Buy Standard

Draft
prEN ISO 16834:2024
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16834:2024
01-april-2024
Dodajni in pomožni materiali za varjenje - Žične elektrode, žice, palice in čisti vari
za obločno varjenje visokotrdnostnih jekel v zaščitnemi plinu - Razvrstitev
(ISO/DIS 16834:2024)
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc
welding of high strength steels - Classification (ISO/DIS 16834:2024)
Schweißzusätze - Drahtelektroden, Drähte, Stäbe und Schweißgut zum
Schutzgasschweißen von hochfesten Stählen - Einteilung (ISO/DIS 16834:2024)
Produits consommables pour le soudage - Fils-électrodes, fils, baguettes et dépôts pour
le soudage à l'arc sous flux gazeux des aciers à haute résistance - Classification
(ISO/DIS 16834:2024)
Ta slovenski standard je istoveten z: prEN ISO 16834
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 16834:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16834:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16834:2024
DRAFT
International
Standard
ISO/DIS 16834
ISO/TC 44/SC 3
Welding consumables — Wire
Secretariat: ANSI
electrodes, wires, rods and deposits
Voting begins on:
for gas shielded arc welding of high
2024-02-28
strength steels — Classification
Voting terminates on:
2024-05-22
Produits consommables pour le soudage — Fils-électrodes, fils,
baguettes et dépôts pour le soudage à l'arc sous flux gazeux des
aciers à haute résistance — Classification
ICS: 25.160.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16834:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16834:2024
DRAFT
ISO/DIS 16834:2024(en)
International
Standard
ISO/DIS 16834
ISO/TC 44/SC 3
Welding consumables — Wire
Secretariat: ANSI
electrodes, wires, rods and deposits
Voting begins on:
for gas shielded arc welding of high
strength steels — Classification
Voting terminates on:
Produits consommables pour le soudage — Fils-électrodes, fils,
baguettes et dépôts pour le soudage à l'arc sous flux gazeux des
aciers à haute résistance — Classification
ICS: 25.160.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 16834:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16834:2024
ISO/DIS 16834:2024(en)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.