SIST EN ISO 14172:2023
(Main)Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
This document prescribes requirements for the classification of nickel and nickel-alloy covered
electrodes for manual metal arc welding and overlaying. The classification of the covered electrodes is
based on the chemical composition of their deposited all-weld metal. It includes those compositions in
which the nickel content exceeds that of any other element.
Schweißzusätze - Umhüllte Stabelektroden zum Lichtbogenhandschweißen von Nickel und Nickellegierungen - Einteilung (ISO 14172:2023)
Dieses Dokument legt die Anforderungen für die Einteilung von umhüllten Stabelektroden aus Nickel und Nickellegierungen zum Lichtbogenhandschweißen und zum Schweißplattieren fest. Die Einteilung der umhüllten Stabelektroden basiert auf der chemischen Zusammensetzung des reinen Schweißgutes. Es schließt solche Zusammensetzungen ein, bei denen Nickel den größten Einzelgehalt aufweist.
Produits consommables pour le soudage - Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel - Classification (ISO 14172:2023)
IEC 61375-2-8:2021 s'applique à l'ensemble des équipements et dispositifs mis en œuvre conformément à l'IEC 61375-2-3:2015, l'IEC 61375-2-5:2014 et l'IEC 61375-3-4:2014, c'est-à-dire qu'elle couvre les modes opératoires à appliquer à ces équipements et dispositifs dont il convient de démontrer la conformité.
Dodajni in pomožni materiali za varjenje - Oplaščene elektrode za ročno obločno varjenje niklja in njegovih zlitin - Razvrstitev (ISO 14172:2023)
Ta dokument določa zahteve za razvrščanje oplaščenih elektrod za ročno obločno varjenje in prekrivanje niklja in nikljevih zlitin. Razvrstitev obravnavanih elektrod temelji na kemični sestavi njihovih čistih varov. Vključuje sestave, v katerih vsebnost niklja presega vsebnost katerega koli drugega elementa.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14172:2023
01-september-2023
Nadomešča:
SIST EN ISO 14172:2015
Dodajni in pomožni materiali za varjenje - Oplaščene elektrode za ročno obločno
varjenje niklja in njegovih zlitin - Razvrstitev (ISO 14172:2023)
Welding consumables - Covered electrodes for manual metal arc welding of nickel and
nickel alloys - Classification (ISO 14172:2023)
Schweißzusätze - Umhüllte Stabelektroden zum Lichtbogenhandschweißen von Nickel
und Nickellegierungen - Einteilung (ISO 14172:2023)
Produits consommables pour le soudage - Électrodes enrobées pour le soudage manuel
à l'arc du nickel et des alliages de nickel - Classification (ISO 14172:2023)
Ta slovenski standard je istoveten z: EN ISO 14172:2023
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST EN ISO 14172:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14172:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 14172:2023
EN ISO 14172
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 14172:2015
English Version
Welding consumables - Covered electrodes for manual
metal arc welding of nickel and nickel alloys -
Classification (ISO 14172:2023)
Produits consommables pour le soudage - Électrodes Schweißzusätze - Umhüllte Stabelektroden zum
enrobées pour le soudage manuel à l'arc du nickel et Lichtbogenhandschweißen von Nickel und
des alliages de nickel - Classification (ISO 14172:2023) Nickellegierungen - Einteilung (ISO 14172:2023)
This European Standard was approved by CEN on 29 December 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14172:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14172:2023
EN ISO 14172:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14172:2023
EN ISO 14172:2023 (E)
European foreword
This document (EN ISO 14172:2023) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14172:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
N
...
SLOVENSKI STANDARD
oSIST prEN ISO 14172:2022
01-november-2022
Dodajni in pomožni materiali za varjenje - Oplaščene elektrode za ročno obločno
varjenje niklja in njegovih zlitin - Razvrstitev (ISO/DIS 14172:2022)
Welding consumables - Covered electrodes for manual metal arc welding of nickel and
nickel alloys - Classification (ISO/DIS 14172:2022)
Schweißzusätze - Umhüllte Stabelektroden zum Lichtbogenhandschweißen von Nickel
und Nickellegierungen - Einteilung (ISO/DIS 14172:2022)
Produits consommables pour le soudage - Électrodes enrobées pour le soudage manuel
à l'arc du nickel et des alliages de nickel - Classification (ISO/DIS 14172:2022)
Ta slovenski standard je istoveten z: prEN ISO 14172
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
oSIST prEN ISO 14172:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 14172:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14172:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14172
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-09-05 2022-11-28
Welding consumables — Covered electrodes for
manual metal arc welding of nickel and nickel alloys —
Classification
Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et
des alliages de nickel — Classification
ICS: 25.160.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14172:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14172:2022
ISO/DIS 14172:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14172
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
Welding consumables — Covered electrodes for
manual metal arc welding of nickel and nickel alloys —
Classification
Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et
des alliages de nickel — Classification
ICS: 25.160.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14172:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14172:2022
ISO/DIS 14172:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Nor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.