SIST EN ISO 10081-1:2005

Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)

ISO 10081-1:2003 specifies the classification and designation of dense shaped refractory products of the alumina-silica series, with the following exceptions: products containing more than 5 % of any metallic oxide other than alumina, silica, iron oxide; and products containing more than 1 % carbon, carbides, nitrides, oxynitrides or any associated materials.

Klassifizierung dichter geformter feuerfester Erzeugnisse - Teil 1: Alumina-Silika (ISO 10081-1:2003)

Classification des produits réfractaires façonnés denses - Partie 1: Silice-alumine (ISO 10081-1:2003)

L'ISO 10081-1:2003 spécifie la classification et la désignation des produits réfractaires façonnés denses de la série silice-alumine, à l'exception des produits suivants: produits contenant plus de 5 % d'oxyde métallique autre que l'alumine, la silice, l'oxyde de fer; et produits contenant plus de 1 % de carbone, carbures, nitrures, oxynitrures ou autres matériaux associés.

Razvrstitev gostih oblikovanih ognjevzdržnih izdelkov - 1. del: Alumosilikatni izdelki (ISO 10081-1:2003)

General Information

• Status: Published
• Publication Date: 30-Jun-2005
• ICS: 81.080 - Refractories
• Technical Committee: IKER - Ceramics
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2005
• Due Date: 01-Jul-2005
• Completion Date: 01-Jul-2005
• Ref Project: EN ISO 10081-1:2005 - Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)

Relations

• Replaces: SIST EN 12475-1:1998 - Classification of dense shaped refractory products - Part 1: Alumina-silica products
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10081-1:2005
01-julij-2005
1DGRPHãþD
SIST EN 12475-1:1998
Razvrstitev gostih oblikovanih ognjevzdržnih izdelkov - 1. del: Alumosilikatni
izdelki (ISO 10081-1:2003)
Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-
1:2003)
Klassifizierung dichter geformter feuerfester Erzeugnisse - Teil 1: Alumina-Silika (ISO
10081-1:2003)
Classification des produits réfractaires façonnés denses - Partie 1: Silice-alumine (ISO
10081-1:2003)
Ta slovenski standard je istoveten z: EN ISO 10081-1:2005
ICS:
81.080 Ognjevzdržni materiali Refractories
SIST EN ISO 10081-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10081-1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 10081-1:2005



EUROPEAN STANDARD
EN ISO 10081-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2005
ICS 81.080 Supersedes EN 12475-1:1998
English version
Classification of dense shaped refractory products - Part 1:
Alumina-silica (ISO 10081-1:2003)
Classification des produits réfractaires façonnés denses - Klassifizierung dichter geformter feuerfester Erzeugnisse -
Partie 1: Silice-alumine (ISO 10081-1:2003) Teil 1: Alumina-Silika (ISO 10081-1:2003)
This European Standard was approved by CEN on 7 February 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10081-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10081-1:2005
EN ISO 10081-1:2005 (E)






Foreword



The text of ISO 10081-1:2003 has been prepared by Technical Committee ISO/TC 33
"Refractories" of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 10081-1:2005 by Technical Committee CEN/TC 187 "Refractory products and
materials" the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2005, and conflicting national
standards shall be withdrawn at the latest by September 2005.

This document supersedes EN 12475-1:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice

The text of ISO 10081-1:2003 has been approved by CEN as EN ISO 10081-1:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10081-1:2005
INTERNATIONAL ISO
STANDARD 10081-1
Second edition
2003-12-01
Classification of dense shaped refractory
products —
Part 1:
Alumina-silica
Classification des produits réfractaires façonnés denses —
Partie 1: Silice-alumine

Reference number
ISO 10081-1:2003(E)
©
ISO 2003

---------------------- Page: 5 ----------------------

SIST EN ISO 10081-1:2005
ISO 10081-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2003 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 10081-1:2005
ISO 10081-1:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations
...