SIST EN 12722:1997
(Main)Furniture - Assessment of surface resistance to dry heat (ISO 4211-3:1993 modified)
Furniture - Assessment of surface resistance to dry heat (ISO 4211-3:1993 modified)
This European Standard specifies a method of assessment of surface resistance to dry heat and relates to the hard surfaces of all finished furniture, regardless of material, except for finishes on leather and fabrics which are excluded from this European Standard. The test is generally carried out on finished furniture but might be carried out on test panels of the same material, finished in an identical manner to the finished product and on a size sufficient to meet the requirements of the test.
Möbel - Bewertung der Beständigkeit von Oberflächen gegen trockene Hitze (ISO 4211-3:1993 modifiziert)
Diese Europäische Norm legt ein Bewertungsverfahren für die Beständigkeit von Oberflächen gegen trockene Hitze fest und gilt für starre Oberflächen von oberflächenbehandelten Möbeln unabhängig vom verwendeten Werkstoff, außer für Oberflächen aus Leder und Textilien, die nicht unter diese Europäische Norm fallen. Die Prüfungen werden gewöhnlich am Möbel durchgeführt, können aber auch an Prüfkörpern durchgeführt werden, die aus dem gleichen Werkstoff mit identischer Oberflächenbehandlung wie das Möbel und groß genug sind, um den Anforderungen der Prüfung zu entsprechen.
Meubles - Evaluation de la résistance des surfaces a la chaleur seche (ISO 4211-3:1993 modifiée)
La présente norme européenne prescrit une méthode d'évaluation de la résistance des surfaces a la chaleur seche et porte sur les surfaces dures de tous les meubles finis sans distinction de matériau, a l'exception des finitions appliquées sur le cuir ou les tissus qui sont exclues de la présente norme européenne. L'essai est généralement réalisé sur des meubles finis, mais il pourrait etre effectué sur des panneaux d'essai de dimensions suffisantes pour satisfaire aux spécifications de l'essai, et du meme matériau et de finition identique au meuble fini.
Pohištvo - Ugotavljanje odpornosti površine proti suhi toploti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Ugotavljanje odpornosti površine proti suhi toplotiMöbel - Bewertung der Beständigkeit von Oberflächen gegen trockene Hitze (ISO 4211-3:1993 modifiziert)Meubles - Evaluation de la résistance des surfaces a la chaleur seche (ISO 4211-3:1993 modifiée)Furniture - Assessment of surface resistance to dry heat (ISO 4211-3:1993 modified)97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 12722:1997SIST EN 12722:1997en01-oktober-1997SIST EN 12722:1997SLOVENSKI
STANDARDSIST ISO 4211-3:19951DGRPHãþD
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
SIST EN 12722:1997
INTERNATIONAL STANDARD ISO 4211-3 First edition 1993-12-01 Furniture - Tests for surfaces - Part 3: Assessment of resistance to dry heat Ameublemen t - Essais des finitions de surface - Partie 3: lkaluation de Ia ksistance 3 Ia chaleur Seche Reference number ISO 4211-3:1993(E) SIST EN 12722:1997
ISO 421 l-3:1993(E) Contents 1 2 3 4 5 6 7 8 9 10 . . . . Scope . Normative references . Principle . Apparatus and materials . Test temperatures . l- . I . . . . Page . . . . . . . 1 . . . . . . . *1 . . . . . . . 1 .*. 1 . . . . . . . 2 . . 1 esr panem . 2 . Procedure . 2 Examination of test Panel . 3 Assessment of results . 4 Test rer>ort . 4 0 ISO 1993 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without per- mission in writing from the publisher. International Organization for Standardization Case Postale 56 @ CH-l 211 Geneve 20 l Switzerland Printed in Switzerland SIST EN 12722:1997
0 421 l-3:1993(E) Foreword ISO (the International Organizaticn for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 421 l-3 was prepared by Technical Committee lSO/TC 136, Fumiture, Sub-Committee SC 1, Test methods. ISO 4211 consists of the following Parts, under the general title Furniture - Tests for surfaces: - Part 2: Assessment of resistance to wet heat - Part 3: Assessment of resistance to dry heat - Part 4: Assessment of resistance to impact - Part 5: Assessment of resistance to scra tching - Part 6: Assessment of resistance to abrasion - Part 7: Assessment of adhesion of finishes to Substrate NOTE 1 ISO 4211:1979 was originally published as an independent International Standard, but is now regarded as part 1 of this series. . . . Ill SIST EN 12722:1997
This page intentionally left blank SIST EN 12722:1997
INTERNATIONAL STANDARD ISO 4211=3:1993(E) Furniture - Tests for surfaces - Part 3: Assessment of resistance to dry heat 1 Scope This part of ISO 4211 specifies a method of assess- ment of surface resistance to dry heat and relates to the hard sutfaces of all finished furniture, regardless of material, except for finishes on leather and coated fabrics which are excluded from this part of ISO 4211. The test may be carried out on finished furniture but is generally carried out on test Panels of a size suffi- cient to meet the requirements of the test and of the same material and finished in an identical manner to the finished furniture. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 4211. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this part of ISO 4211 are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 209-1: 1989, Wrought aluminium and aluminium alloys - Chemical composition and forms of products - Part 1: Chemical composition. ISO 1770:1981, Solid-Stern general purpose ther- mome ters. ISO 3668:1976, Paints and varnishes - Visual com- parison of the colour o f paints. ISO 4211: 1979, Furniture - Assessment of surface resistance to cold liquids. 3 Principle A Standard aluminium alloy block at a specified test temperature is placed on the surface of the test Panel. After a specified period of time the block is removed. The test area is wiped dry and the test Panel left un- disturbed for at least 16 h. lt is then examined under specified lighting conditions for signs of darnage (dis- coloration, Change in lustre, blistering or other de- fects). The darnage is assessed by reference to a descriptive numerical rating Code. 4 Apparatus and materials 4.1 Thermometer, as specified in ISO 1770, ca- pable of insertion to the b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.