kSIST FprEN IEC 60794-1-129:2025
(Main)Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Straight midspan access to optical elements, method e29
Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Straight midspan access to optical elements, method e29
Lichtwellenleiterkabel – Teil 1-129: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Gerader Zugang zu optischen Elementen in der Mitte des Kabelstrangs, Verfahren E29
Câbles à fibres optiques - Partie 1-129: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Accès à mi-portée rectiligne vers les éléments optiques, méthode e29
Optični kabli - 1-129. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanske preskusne metode - Neposreden dostop do optičnih elementov na sredini razpona, metoda e29
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-129:2025
01-marec-2025
Optični kabli - 1-129. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Neposreden dostop do optičnih
elementov na sredini razpona, metoda e29
Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Straight midspan access to optical elements,
method e29
Câbles à fibres optiques - Partie 1-129: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Accès à
mi-portée rectiligne vers les éléments optiques, méthode e29
Ta slovenski standard je istoveten z: prEN IEC 60794-1-129:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-129:2025 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60794-1-129:2025
oSIST prEN IEC 60794-1-129:2025
86A/2509/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-129 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-12-20 2025-03-14
SUPERSEDES DOCUMENTS:
86A/2422/CD, 86A/2505/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Straight midspan access to optical elements, Method E29
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.
oSIST prEN IEC 60794-1-129:2025
IEC CDV 60794-1-129 ED1 © IEC 2024 2 86A/2509/CDV
1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Method E29 – Straight midspan access to optical elements . 5
8 4.1 Object . 5
9 4.2 Sample . 5
10 4.3 Apparatus . 6
11 4.4 Procedure . 6
12 4.4.1 General . 6
13 4.4.2 Procedure 1 . 7
14 4.4.3 Procedure 2 . 7
15 4.4.4 Overview . 8
16 4.5 Requirements . 8
17 4.6 Details to be specified . 9
18 4.7 Details to be reported . 9
19 Bibliography . 10
21 Figure 1 – Concept of straight midspan access . 6
22 Figure 2 – Straight midspan access – Procedure 1 . 7
23 Figure 3 – Straight midspan access – Procedure 2 . 8
oSIST prEN IEC 60794-1-129:2025
IEC CDV 60794-1-129 ED1 © IEC 2024 3 86A/2509/CDV
25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
28 OPTICAL FIBRE CABLES –
30 Part 1-129: Generic specification –
31 Basic optical cable test procedures –
32 Mechanical test methods – Straight midspan access to optical elements,
33 Method E29
35 FOREWORD
36 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
37 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
38 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
39 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
40 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
41 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
42 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
43 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
44 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
45 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
46 consensus of opinion on the relevant subjects since each technical committee has representation from all
47 interested IEC National Committees.
48 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
49 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
50 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
51 misinterpretation by any end user.
52 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
53 transparently to the maximum extent possible in their national and regional publications. Any divergence between
54 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
55 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
56 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
57 services carried out by independent certification bodies.
58 6) All users should ensure that they have the latest edition of this publication.
59 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
60 members of its technical committees and IEC National Committees for any personal injury, property damage or
61 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
62 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
63 Publications.
64 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
65 indispensable for the correct application of this publication.
66 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
67 rights. IEC shall not be held responsible for identifying any or all such patent rights.
68 IEC 60794-1-129 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical
69 committee 86: Fibre optics. It is an International Standard.
70 This document partially replaces IEC 60794-1-21:2015+AMD1:2020 CSV.
71 This edition includes the following significant technical changes with respect to IEC 60794-1-
72 21:2015+AMD1:2020 CSV:
73 a) this document cancels and replaces method E29 of IEC 60794-1-21:2015+AMD1:2020
74 CSV;
75 b) add the description for applicable cable types;
76 c) update Figure 2a), Figure 2b) and Figure 3;
77 d) add the displacement measure description;
78 e) add the details to be report.
oSIST prEN IEC 60794-1-129:2025
IEC CDV 60794-1-129 ED1 © IEC 2024 4 86A/2509/CDV
79 The text of this an International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
81 Full information on the voting for its approval can be found in the report on voting indicated in
82 the above table.
83 The language used for the development of this an International Standard is English.
84 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
85 accordance with ISO/IEC Directives, Pa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.