SIST EN IEC 60794-1-110:2025
(Main)Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10 (IEC 60794-1-110:2025)
Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10 (IEC 60794-1-110:2025)
IEC 60794-1-110:2025 defines test procedures used to establishing uniform requirements for mechanical performance - kink. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. IEC 60794-1-2 gives general requirements, definitions and a complete reference guide to test methods of all types.
This first edition cancels and replaces Method E10 of the first edition of IEC 60794-1-21:2015, which will be withdrawn. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of "4.7";
addition of "Annex A".
Lichtwellenleiterkabel - Teil 1-110: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Knickung, Verfahren E10 (IEC 60794-1-110:2025)
Câbles à fibres optiques - Partie 1-110: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Pliure (effet de paille), méthode e10 (IEC 60794-1-110:2025)
IEC 60794-1-110:2025 s’applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. L’objet du présent document est de définir les procédures d’essai à utiliser en vue d’établir des exigences uniformes relatives aux performances mécaniques – pliure (effet de paille). L’IEC 60794-1-2 contient les exigences générales, les définitions et un guide de référence complet de tous les types de méthodes d’essai.
Cette première édition annule et remplace la Méthode E10 de la première édition de l'IEC 60794-1-21:2015, qui est destinée à être supprimée. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout du "4.7";
b) ajout de "Annexe A".
Optični kabli - 1-110. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanske preskusne metode - Upogib, metoda E10 (IEC 60794-1-110:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Nadomešča:
SIST EN 60794-1-21:2015
SIST EN 60794-1-21:2015/A1:2020
Optični kabli - 1-110. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Upogib, metoda E10 (IEC 60794-1-
110:2025)
Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Kink, Method E10 (IEC 60794-1-110:2025)
Lichtwellenleiterkabel - Teil 1-110: Fachgrundspezifikation - Grundlegende Prüfverfahren
für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Knickung, Verfahren E10 (IEC
60794-1-110:2025)
Câbles à fibres optiques - Partie 1-110: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Pliure
(effet de paille), méthode e10 (IEC 60794-1-110:2025)
Ta slovenski standard je istoveten z: EN IEC 60794-1-110:2025
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60794-1-110
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2025
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially); EN 60794-1-
21:2015/A1:2020 (partially)
English Version
Optical fibre cables - Part 1-110: Generic specification - Basic
optical cable test procedures - Mechanical tests methods - Kink,
Method E10
(IEC 60794-1-110:2025)
Câbles à fibres optiques - Partie 1-110: Spécification Lichtwellenleiterkabel - Teil 1-110: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Pliure (effet de Mechanische Prüfverfahren - Knickung, Verfahren E10
paille), Méthode E10 (IEC 60794-1-110:2025)
(IEC 60794-1-110:2025)
This European Standard was approved by CENELEC on 2025-09-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-110:2025 E
European foreword
The text of document 86A/2436/CDV, future edition 1 of IEC 60794-1-110, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-110:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-10-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-10-31
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-110:2025 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic EN IEC 60794-1-1 -
specification - General
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-110 ®
Edition 1.0 2025-08
INTERNATIONAL
STANDARD
Optical fibre cables -
Part 1-110: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Kink, Method E10
ICS 33.180.10 ISBN 978-2-8327-0640-4
IEC 60794-1-110:2025-08(en)
IEC 60794-1-110:2025 © IEC 2025
CONTENTS
FOREWORD . 2
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Method E10: Kink . 4
4.1 Object . 4
4.2 Sample . 4
4.3 Apparatus . 4
4.4 Procedure . 5
4.5 Requirements . 5
4.6 Details to be specified . 5
4.7 Details to be reported . 5
Annex A (informative) Kink test using a tensile machine . 7
A.1 General . 7
A.2 Recommended test conditions . 7
Figure 1 – Kink test . 6
Figure A.1 – Example of kink test apparatus using a tensile machine . 8
Table A.1 – Recommended conditions for the kink test using a tensile machine . 7
IEC 60794-1-110:2025 © IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-110: Generic specification -
Basic optical cable test procedures -
Mechanical tests methods - Kink, Method E10
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.