SIST EN ISO 11126-10:2018

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017)

ISO 11126-10:2017 specifies requirements for almandite garnet abrasives, as supplied for blast-cleaning. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in ISO 11126-10:2017 apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use.
Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127.
NOTE       Although ISO 11126-10:2017 has been developed specifically to meet requirements for preparation of steelwork, the properties specified are generally appropriate for use when preparing other material surfaces, or components, using blast- cleaning techniques. These techniques are described in ISO 8504‑2.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 10: Granat (Almandin) (ISO 11126-10:2017)

Dieses Dokument legt Anforderungen für Strahlmittel aus Granat (Almandin) fest, wie sie für Strahl-verfahren geliefert werden. Er legt Bereiche für die Korngröße und Grenzwerte für scheinbare Dichte, Härte nach Mohs, Feuchtegehalt, Leitfähigkeit des wässrigen Eluats und wasserlösliche Chloride fest.
Die in diesem Dokument festgelegten Anforderungen gelten nur für im „Neuzustand“ gelieferte, unbenutzte Strahlmittel. Sie gelten nicht für Strahlmittel während oder nach der Verwendung.
Prüfverfahren für nichtmetallische Strahlmittel sind in den verschiedenen Teilen von ISO 11127 enthalten.
ANMERKUNG   Obwohl dieses Dokument speziell für die Bedürfnisse der Vorbereitung von Stahlbauten ausgearbeitet worden ist, entsprechen die festgelegten Eigenschaften allgemein den bei der Vorbereitung anderer Werkstoff¬oberflächen oder Bauteile durch Strahlverfahren zu stellenden Anforderungen. Diese Verfahren sind in ISO 8504 2 beschrieben

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par projection - Partie 10: Almandite (ISO 11126-10:2017)

L'ISO 11126-10 :2017 spécifié les exigences relatives aux abrasifs constitués d'almandite, tels qu'ils sont fournis pour la préparation par projection. Il spécifie les intervalles granulométriques et les valeurs de masse volumique apparente, dureté Mohs, teneur en humidité, conductivité de l'extrait aqueux et teneur en chlorures solubles dans l'eau.
Les spécifications spécifiées dans l'ISO 11126-10 :2017 s'appliquent aux abrasifs fournis à «l'état neuf» uniquement. Elles ne s'appliquent pas aux abrasifs pendant ou après utilisation.
Les méthodes d'essai relatives aux abrasifs non métalliques destinés à la préparation par projection sont indiquées dans les différentes parties de l'ISO 11127.
NOTE       Bien que l'ISO 11126-10 :2017 ait été spécialement élaboré pour satisfaire aux exigences de préparation des tôleries, les propriétés spécifiées sont généralement appropriées à la préparation de subjectiles ou éléments d'autres matériaux, par les techniques de décapage par projection. Ces techniques sont décrites dans l'ISO 8504‑2.

Priprava jeklenih podlag pred nanašanjem barv in sorodnih proizvodov - Specifikacije za nekovinske granulate za peskanje - 10. del: Almanditni granat (ISO 11126-10:2017)

Ta dokument določa zahteve za almanditne granatne granulate, dobavljene za peskanje. Določa razpon velikosti delcev in vrednosti za navidezno gostoto, Mohsovo trdoto, vsebnost vlage, prevodnost vodnega ekstrakta in vodotopnih kloridov.
Zahteve v tem dokumentu se uporabljajo samo za granulate, ki so dobavljeni »novi«. Ne uporabljajo se za granulate med njihovo uporabo ali po njej.
Preskusne metode za nekovinske granulate za peskanje so podane v različnih delih standarda ISO 11127.
OPOMBA: Čeprav je bil ta dokument pripravljen posebej za izpolnjevanje zahtev za pripravo
jekla, so opredeljene lastnosti na splošno ustrezne za uporabo pri obdelavi površin drugih materialov ali sestavnih delov s tehnikami peskanja. Te tehnike so opisane v standardu ISO 8504-2.

General Information

• Status: Published
• Public Enquiry End Date: 29-Sep-2015
• Publication Date: 10-Jan-2018
• ICS: 25.220.10 - Surface preparation
• ICS: 87.020 - Paint coating processes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Jan-2018
• Due Date: 12-Mar-2018
• Completion Date: 11-Jan-2018
• Ref Project: EN ISO 11126-10:2017 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017)

Relations

• Replaces: SIST EN ISO 11126-10:2005 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000)
• Effective Date: 01-Feb-2018
• Revised: oSIST prEN ISO 11126-10:2025 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO/DIS 11126-10:2025)
• Effective Date: 01-Mar-2025

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN ISO 11126-10:2005
Priprava jeklenih podlag pred nanašanjem barv in sorodnih proizvodov -
Specifikacije za nekovinske granulate za peskanje - 10. del: Almanditni granat (ISO
11126-10:2017)
Preparation of steel substrates before application of paints and related products -
Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO
11126-10:2017)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Anforderungen an nichtmetallische Strahlmittel - Teil 10: Granat (Almandin) (ISO 11126-
10:2017)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par
projection - Partie 10: Almandite (ISO 11126-10:2017)
Ta slovenski standard je istoveten z: EN ISO 11126-10:2017
ICS:
25.220.10 Priprava površine Surface preparation
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11126-10
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 25.220.10 Supersedes EN ISO 11126-10:2004
English Version
Preparation of steel substrates before application of paints
and related products - Specifications for non-metallic
blast-cleaning abrasives - Part 10: Almandite garnet (ISO
11126-10:2017)
Préparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen
peintures et de produits assimilés - Spécifications pour von Beschichtungsstoffen - Anforderungen an
abrasifs non métalliques destinés à la préparation par nichtmetallische Strahlmittel - Teil 10: Granat
projection - Partie 10: Almandite (ISO 11126-10:2017) (Almandin) (ISO 11126-10:2017)
This European Standard was approved by CEN on 4 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11126-10:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 11126-10:2017) has been prepared by Technical Committee ISO/TC 35 “Paints
and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11126-10:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11126-10:2017 has been approved by CEN as EN ISO 11126-10:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 11126-10
Second edition
2017-11
Preparation of steel substrates before
application of paints and related
products — Specifications for non-
metallic blast-cleaning abrasives —
Part 10:
Almandite garnet
Préparation des subjectiles d'acier avant application de peintures et
de produits assimilés — Spécifications pour abrasifs non métalliques
destinés à la préparation par projection —
Partie 10: Almandite
Reference number
ISO 11126-10:2017(E)
©
ISO 2017
ISO 11126-10:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 11126-10:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2  Normative references . 1
3  Terms and definitions . 2
4  Designation of abrasives . 2
5  Sampling . 2
6 Requirements . 3
6.1 General requirements . 3
6.2 Particular requirements . 3
7  Identification and marking. 3
8  Information to be provided by the manufacturer or supplier . 3
Bibliography . 4
ISO 11126-10:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, als
...