SIST EN ISO 12543-3:2012
(Main)Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
This part of this European Standard specifies performance requirements for laminated glass as defined in EN ISO 12543-1.
Glas im Bauwesen - Verbundglas und Verbund- Sicherheitsglas - Teil 3: Verbundglas (ISO 12543-3:2011)
Dieser Teil von ISO 12543 legt die Leistungsanforderungen für Verbundglas nach der Definition in
ISO 12543-1 fest.
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 3: Verre feuilleté (ISO 12543-3:2011)
L'ISO 12543-3:2011 spécifie les exigences de performances relatives au verre feuilleté, conformément à l'ISO 12543-1.
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 3. del: Lepljeno steklo (ISO 12543-3:2011)
Ta del evropskega standarda opisuje delovne zahteve za lepljeno steklo, kot je določeno v EN 12543-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12543-3:2012
01-januar-2012
1DGRPHãþD
SIST EN ISO 12543-3:1999
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 3. del:
Lepljeno steklo (ISO 12543-3:2011)
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
(ISO 12543-3:2011)
Glas im Bauwesen - Verbundglas und Verbund- Sicherheitsglas - Teil 3: Verbundglas
(ISO 12543-3:2011)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 3: Verre
feuilleté (ISO 12543-3:2011)
Ta slovenski standard je istoveten z: EN ISO 12543-3:2011
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-3:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12543-3:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 12543-3:2012
EUROPEAN STANDARD
EN ISO 12543-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2011
ICS 81.040.20 Supersedes EN ISO 12543-3:1998
English Version
Glass in building - Laminated glass and laminated safety glass -
Part 3: Laminated glass (ISO 12543-3:2011)
Verre dans la construction - Verre feuilleté et verre feuilleté Glas im Bauwesen - Verbundglas und Verbund-
de sécurité - Partie 3: Verre feuilleté (ISO 12543-3:2011) Sicherheitsglas - Teil 3: Verbundglas (ISO 12543-3:2011)
This European Standard was approved by CEN on 6 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12543-3:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12543-3:2012
EN ISO 12543-3:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12543-3:2012
EN ISO 12543-3:2011 (E)
Foreword
This document (EN ISO 12543-3:2011) has been prepared by Technical Committee ISO/TC 160 "Glass in
building" in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat of which is
held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12543-3:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12543-3:2011 has been approved by CEN as a EN ISO 12543-3:2011 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 12543-3:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 12543-3:2012
INTERNATIONAL ISO
STANDARD 12543-3
Second edition
2011-08-15
Glass in building — Laminated glass and
laminated safety glass —
Part 3:
Laminated glass
Verre dans la construction — Verre feuilleté et verre feuilleté de
sécurité —
Partie 3: Verre feuilleté
Reference number
ISO 12543-3:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 12543-3:2012
ISO 12543-3:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12543-3:2012
ISO 12543-3:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12543-3 was prepared by Technical Committee ISO/TC 160, Glass in building, Subcommittee SC 1,
Product considerations.
This second edition cancels and replaces the first edition (ISO 12543-3:1998), which has been technically
revised.
ISO 12543 consists of the following parts, under the general title Glass in building — Laminated glass and
laminated safety glass:
⎯ Part 1: Definitions and description of component parts
⎯ Part 2: Laminated safety glass
⎯ Part 3: Laminated glass
⎯ Part 4: Test methods for durability
⎯ Part 5: Dimensions and edge finishing
⎯ Part 6: Appearance
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 12543-3:2012
---------------------- Page: 10 ----------------------
SIST EN ISO 12543-3:2012
INTERNATIONAL STANDARD ISO 12543-3:2011(E)
Glass in building — Laminated glass and laminated safety
glass —
Part 3:
Laminated glass
1 Scope
This part of ISO 12543 specifies performance requirements for laminated glass as defined in ISO 12543-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.