SIST EN 13763-19:2004

Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators

This European Standard specifies a method for determining the all-fire-impulse and the no-fire-impulse of electric detonators.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 19: Bestimmung des Zündimpulses elektrischer Zünder

Anwendungsbereich
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung des Gesamtzündimpulses und des Nichtzündimpulses von elektrischen Zündern.

Explosifs a usage civil - Détonateurs et relais - Partie 19: Détermination de l'impulsion d'allumage des détonateurs électriques

La présente Norme européenne spécifie une méthode permettant de déterminer l'impulsion d'allumage total et l'impulsion de non-amorçage des détonateurs électriques.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 19. del: Ugotavljanje vžignega impulza električnih detonatorjev

General Information

• Status: Published
• Publication Date: 31-Jan-2004
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2004
• Due Date: 01-Feb-2004
• Completion Date: 01-Feb-2004
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: TP072 - Pravilnik o tehničnih in varnostnih zahtevah, obrazcih ter evidencah za eksplozive in pirotehnične izdelke
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: EN 13763-19:2003 - Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators

Relations

• Revises: oSIST prEN 13763-19:2021 - Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 13763-19:2021 - Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 13763-19:2021 - Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators
• Effective Date: 01-Apr-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 19: Bestimmung des Zündimpulses elektrischer ZünderExplosifs a usage civil - Détonateurs et relais - Partie 19: Détermination de l'impulsion d'allumage des détonateurs électriquesExplosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-19:2003SIST EN 13763-19:2004en01-februar-2004SIST EN 13763-19:2004SLOVENSKI
STANDARD



SIST EN 13763-19:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-19December 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 19:Determination of firing impulse of electric detonatorsExplosifs à usage civil - Détonateurs et relais - Partie 19:Détermination de l'impulsion d'allumage des détonateursélectriquesExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 19: Bestimmung desZündimpulses elektrischer ZünderThis European Standard was approved by CEN on 10 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-19:2003 ESIST EN 13763-19:2004



EN 13763-19:2003 (E)2Contents pageForeword.31Scope.52Normative references.53Terms and definitions.54Test pieces.65Apparatus.66Procedure.77Calculation of test results.78Test report.7Annex A (informative)
Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9SIST EN 13763-19:2004



EN 13763-19:2003 (E)3ForewordThis document (EN 13763-19:2003) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest byJune 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.Annex A is informative.This European Standard is one of a series of standards with the generic title Explosives for civil uses – Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1Part 1: RequirementsEN 13763-2Part 2: Determination of thermal stabilityEN 13763-3Part 3: Determination of sensitiveness to impactEN 13763-4Part 4: Determination of resistance to abrasion of leading wires and shock tubesEN 13763-5Part 5: Determination of resistance to cutting damage of leading wires and shock tubesEN 13763-6Part 6: Determination of resistance to cracking in low temperatures of leading wiresEN 13763-7Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections,crimps and closuresEN 13763-8Part 8: Determination of the resistance to vibration of plain detonatorsEN 13763-9Part 9: Determination of resistance to bending of detonatorsEN 13763-11Part 11: Determination of resistance to damage by dropping of detonators and relaysEN 13763-12Part 12: Determination of resistance to hydrostatic pressureprEN 13763-13Part 13: Determination of resistance of electric detonators against electrostatic dischargeprEN 13763-15Part 15: Determination of equivalent initiating capabilityEN 13763-16Part 16: Determination of delay accuracyEN 13763-17Part 17: Determination of no-fire current of electric detonatorsEN 13763-18Part 18: Determination of series firing current of electric detonatorsEN 13763-20Part 20: Determination of total electrical resistance of electric detonatorsEN 13763-21Part 21: Determination of flash-over voltage of electric detonatorsSIST EN 13763-19:2004



EN 13763-19:2003 (E)4EN 13763-22Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leadingwiresEN 13763-23Part 23: Determination of the shock-wave velocity of shock tubeEN 13763-24Part 24: Determination of the electrical non-conductivity of shock tubeprEN 13763-25Part 25: Determination of transfer capability of surface connectors, relays and couplingaccessoriesprEN 13763-26Part 26: Definitions, methods and requirements for devices and accessories for reliable and safefunction of detonators and relay
...