SIST EN IEC 61757-1-2:2024
(Main)Fibre optic sensors - Part 1-2: Strain measurement - Distributed sensing based on Brillouin scattering (IEC 61757-1-2:2023)
Fibre optic sensors - Part 1-2: Strain measurement - Distributed sensing based on Brillouin scattering (IEC 61757-1-2:2023)
IEC 61757-1-2: 2023 defines detailed specifications for distributed strain measurements with a fibre optic sensor, also known as "fibre optic distributed strain sensing". It is applicable to distributed strain sensing systems (DSS) based on spontaneous or stimulated Brillouin scattering in the optical fibre sensor (strain sensitive element), that is, to sensors capable of measuring absolute strain. This document specifies the most important DSS performance parameters and defines the procedures for their determination.
Lichtwellenleiter-Sensoren - Teil 1-2: Dehnungsmessung - Verteilte Sensorik auf der Basis von Brillouin-Streuung (IEC 61757-1-2:2023)
Capteurs fibroniques - Partie 1-2: Mesure de déformation - Détection répartie basée sur la diffusion de Brillouin (IEC 61757-1-2:2023)
IEC 61757-1-2: 2023 définit des spécifications particulières pour les mesures de déformation réparties avec un capteur fibronique, également appelées "détection de déformation répartie fibronique". Elle s’applique aux systèmes fibroniques répartis de détection de déformation (DSS) basés sur la diffusion de Brillouin spontanée ou stimulée dans le capteur à fibres optiques (élément sensible à la déformation), c’est-à-dire aux capteurs capables de mesurer la déformation absolue. Le présent document spécifie les paramètres de performance DSS les plus importants et définit les procédures pour leur détermination.
Optični senzorji - 1-2. del: Merjenje deformacij - Porazdeljeno zaznavanje na podlagi Brillouinovega sipanja (IEC 61757-1-2:2023)
Standard IEC 61757-1-2: 2023 določa podrobne specifikacije za porazdeljeno merjenje deformacij z optičnim senzorjem, znanim tudi kot optično porazdeljeno zaznavanje deformacij (DTS). Uporablja se za sisteme za porazdeljeno zaznavanje deformacij (DSS) na podlagi spontanega ali stimuliranega Brillouinovega sipanja v optičnem senzorju (element, občutljiv na deformacije), tj. senzorjih, ki so sposobni meriti absolutno deformacijo. Ta dokument določa najpomembnejše parametre delovanja sistema za porazdeljeno zaznavanje deformacij in opredeljuje postopke za njihovo določevanje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61757-1-2:2024
01-februar-2024
Optični senzorji - 1-2. del: Merjenje deformacij - Porazdeljeno zaznavanje na
podlagi Brillouinovega sipanja (IEC 61757-1-2:2023)
Fibre optic sensors - Part 1-2: Strain measurement - Distributed sensing based on
Brillouin scattering (IEC 61757-1-2:2023)
Lichtwellenleiter-Sensoren - Teil 1-2: Dehnungsmessung - Verteilte Sensorik auf der
Basis von Brillouin-Streuung (IEC 61757-1-2:2023)
Capteurs fibroniques - Partie 1-2: Mesure de déformation - Détection répartie basée sur
la diffusion de Brillouin (IEC 61757-1-2:2023)
Ta slovenski standard je istoveten z: EN IEC 61757-1-2:2023
ICS:
33.180.99 Druga oprema za optična Other fibre optic equipment
vlakna
SIST EN IEC 61757-1-2:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61757-1-2:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61757-1-2:2024
EUROPEAN STANDARD EN IEC 61757-1-2
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.99
English Version
Fibre optic sensors - Part 1-2: Strain measurement - Distributed
sensing based on Brillouin scattering
(IEC 61757-1-2:2023)
Capteurs fibroniques - Partie 1-2: Mesure de déformation - Lichtwellenleiter-Sensoren - Teil 1-2: Dehnungsmessung -
Détection répartie basée sur la diffusion de Brillouin Verteilte Sensorik auf der Basis von Brillouin-Streuung
(IEC 61757-1-2:2023) (IEC 61757-1-2:2023)
This European Standard was approved by CENELEC on 2023-09-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61757-1-2:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61757-1-2:2024
EN IEC 61757-1-2:2023 (E)
European foreword
The text of document 86C/1857/CDV, future edition 1 of IEC 61757-1-2, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61757-1-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61757-1-2:2023 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61757-1-2:2024
EN IEC 61757-1-2:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.