SIST EN 13480-4:2012/A2:2016

Metallic industrial piping - Part 4: Fabrication and installation

This Part of this European Standard specifies the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3:2012. Revision of 9.3 “Welding procedures” related to impact test for austenitic steels

Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung

Dieser Teil der Europäischen Norm legt die Anforderungen an die Fertigung und Verlegung, einschließlich der Halterungen, von Rohrleitungssystemen, die nach EN 13480-3:2012 konstruiert sind, fest.

Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation

La présente partie de la présente Norme européenne spécifie les exigences relatives à la fabrication et à l'installation des réseaux de tuyauteries, supports inclus, conçus conformément à l’EN 13480-3:2012.

Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A2

General Information

• Status: Withdrawn
• Public Enquiry End Date: 05-Oct-2014
• Publication Date: 25-Jan-2016
• Withdrawal Date: 13-Dec-2017
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Dec-2017
• Due Date: 04-Jan-2018
• Completion Date: 14-Dec-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13480-4:2012/A2:2015 - Metallic industrial piping - Part 4: Fabrication and installation

Relations

• Amends: SIST EN 13480-4:2012 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 01-Mar-2016
• Replaced By: SIST EN 13480-4:2018 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN 13480-4:2018 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 01-Jan-2018
• Amends: SIST EN 13480-4:2012 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-4:2012/A2:2016
01-marec-2016
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A2
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2012/A2:2015
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2012/A2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-4:2012/A2:2016

---------------------- Page: 2 ----------------------

SIST EN 13480-4:2012/A2:2016


EN 13480-4:2012/A2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2015
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4: Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This amendment A2 modifies the European Standard EN 13480-4:2012; it was approved by CEN on 15 November 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2012/A2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-4:2012/A2:2016
EN 13480-4:2012/A2:2015 (E)
Contents
Page
European foreword .3
1 Modification to Clause 2 .4
2 Modification to 7.1.1 .
...

SLOVENSKI STANDARD
SIST EN 13480-4:2012/oprA2:2014
01-september-2014
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2012/prA2
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2012/oprA2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-4:2012/oprA2:2014

---------------------- Page: 2 ----------------------

SIST EN 13480-4:2012/oprA2:2014

EUROPEAN STANDARD
DRAFT
EN 13480-4:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
April 2014
ICS 23.040.01
English Version
Metallic industrial piping - Part 4: Fabrication and installation
Tuyauteries industrielles métalliques - Partie 4: Fabrication Metallische industrielle Rohrleitungen - Teil 4: Fertigung
et installation und Verlegung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A2, if approved, will modify the European Standard EN 13480-4:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation i
...